Commit Graph

6447 Commits

Author SHA1 Message Date
Matt Jacob
d7ae92aeb3 Update to latest 12160 f/w.
MFC after:	1 week
2001-10-20 21:47:58 +00:00
John Baldwin
76e296aa31 - Make the sio_inited handling more properly MP safe.
- If we are booting with a serial console, then pass the MTX_QUIET flag to
  mtx_init of the sio lock as otherwise KTR_VERBOSE simply doesn't work.
2001-10-20 03:32:33 +00:00
Søren Schmidt
7ebc82d6ec Make an ATAPI CD device appear as /dev/acdN and the individual
tracks as /dev/acdNtY.

This solves the problems with having to deal with howmany and which
devices are open.

For hysterical reasons ONLY, make a link to both the acdNa & acdNc devices.
2001-10-19 13:34:48 +00:00
Jonathan Lemon
109362e442 Add a driver for the Intel PRO/1000 Gigabit Ethernet boards. 2001-10-19 02:17:32 +00:00
Matt Jacob
8b8e73049d Protect against deranged fabric nameservers that spit out 10000 identical
port numbers.

MFC after:	1 day
2001-10-18 17:26:52 +00:00
Søren Schmidt
db92bfc1b4 Fix bug introduced by the last commit, the caused some ATAPI
devices to fail to proberly initialize at boot..
2001-10-16 08:07:36 +00:00
Matt Jacob
ca8f579ceb Fix it so that it doesn't complain for compiles on alpha- that is, match
format string args to actual args.
2001-10-14 19:44:15 +00:00
Scott Long
73b9d66d9a Turn on the hardware volume buttons that are present on most laptops with
these chips.  There is a new hint, hint.pcm.N.hwvol_config, that can be set
to 1 or 0 to select which pins the buttons are connected to.  I'm open to
suggestions on where to document this.  Also bump the number of playback
channels up to 4.

MFC after:	3 days
2001-10-14 19:22:51 +00:00
Kazutaka YOKOTA
8166ba27bd Hack for the "out-of-sync" error.
- Count the number of this error.
- When the error is detected for the first time, the psm driver will
  throw few data bytes (up to entire packet size) and see if it can
  get back to sync.
- If the error still persists, the psm driver disable/enable the mouse
  and see if it works.
- If the error still persists and the count goes up to 20,
  the psm driver reset and reinitialize the mouse. The counter
  is reset to zero.
- It also discards an incomplete data packet when the interval
  between two consequtive bytes are longer than pre-defined timeout
  (2 seconds).  The last byte which arrived late will be regarded as
  the first byte of a new packet.  This is louie's idea.

You may see the following error logs during the above operations:

  "psmintr: delay too long; resetting byte count"
  "psmintr: out of sync (%04x != %04x)"
  "psmintr: discard a byte (%d)"
  "psmintr: re-enable the mouse"
  "psmintr: reset the mouse"

MFC after:	1 month
2001-10-13 10:28:02 +00:00
Greg Lehey
5de383bcbc attachobject: Return correct status after successfully attaching a
plex.

Indirectly found by:	Hendrik Scholz <hscholz@perikles.toppoint.de>
2001-10-13 07:22:12 +00:00
Poul-Henning Kamp
602150cc70 Set ulptusein = 0 so that the machine doesn't hang solid after a
printjob.

There is probably a better fix, but this at least makes USB printing
working again.
2001-10-12 11:05:58 +00:00
John Baldwin
bd78cece5d Change the kernel's ucred API as follows:
- crhold() returns a reference to the ucred whose refcount it bumps.
- crcopy() now simply copies the credentials from one credential to
  another and has no return value.
- a new crshared() primitive is added which returns true if a ucred's
  refcount is > 1 and false (0) otherwise.
2001-10-11 23:38:17 +00:00
Matt Jacob
5aa8fe17f8 Fix declaration disagreement. 2001-10-11 22:02:14 +00:00
John Baldwin
7106ca0d1a Add missing includes of sys/lock.h. 2001-10-11 17:52:20 +00:00
Orion Hodson
9b6a5708db use pcm_getbuffersize() 2001-10-10 17:56:35 +00:00
Scott Long
baadfb4c1e Update to using the pcm_getbuffersize() method.
Fix an off-by-one error in the saving of the dsp memory.
Up the play channels to 2.

MFC after:	3 days
2001-10-09 19:46:09 +00:00
John Baldwin
9935282d50 Use crhold() instead of crdup(). The md(4) driver doesn't modify the ucred
that it uses, so it merely needs to bump its refcount to make it immutable
rather than obtain its own copy.
2001-10-09 16:37:51 +00:00
Yoshihiro Takahashi
5ad8aff376 Added Logitec LHA-301 pnp id. 2001-10-09 15:30:19 +00:00
Jonathan Lemon
f3a48bd0ae The kernel doesn't have <stdio.h> or <string.h>. Remove these. 2001-10-09 04:05:58 +00:00
Cameron Grant
a791cfee44 use pcm_getbuffersize()
only creat a mic recording channel if the codec supports it
2001-10-08 06:10:39 +00:00
Cameron Grant
50388172c5 use pcm_getbuffersize()
use seperate dma tags for buffers and control info
2001-10-08 06:01:13 +00:00
Cameron Grant
39dbd126c7 use pcm_getbuffersize() 2001-10-08 05:59:54 +00:00
Cameron Grant
82ab7a3bc2 * register the correct number of channels
* include hw buffer size in sndstat info
2001-10-07 23:31:52 +00:00
Cameron Grant
a9d2ee22ac use mixer channel numbers, not channel masks- this should fix sb/sbpro mixer
problems.
2001-10-07 23:28:34 +00:00
Matt Jacob
1c3749836f Add some somewhat vague documentation for this driver and a list
of Hardware that might, in fact, work.
2001-10-07 18:26:47 +00:00
Doug Rabson
a067d21032 Make the interrupt routing a bit less chatty unless bootverbose is set. 2001-10-07 18:25:43 +00:00
Matt Jacob
71793c0dc4 Some patches from Doug for ia64 support- the principle one being the
appropriate cache flush that provides MEMORY_BARRIER in between handoffs
between host && RISC processor for the shared memory request/response
queues.

Submitted by:	dfr@nlsystems.com
2001-10-07 18:18:50 +00:00
Luigi Rizzo
06bd2f9c81 Make this compile again after the changes to make bridge kld'able 2001-10-07 00:18:48 +00:00
Matt Jacob
cd37f56f5a Misunderstanding documentation caused me to try and set 1Gbps/2Gps/Auto
connection speed for the 2300 in the wrong offset in the ICB. Oops.

Respect some QLogic errat wrt PCI errors on certain shared host/RISC registers.
2001-10-06 20:41:18 +00:00
Matt Jacob
3bd4033010 Whups- remember to zero the isr pointer arg. 2001-10-06 19:34:43 +00:00
Matt Jacob
db4fa023f8 Respect QLogic's errata- read BIU_ISR even on the 2300
to see if there's an interrupt (avoids PCI parity errors
which can occur on the 2312 if you access some registers
from the host at the same time the RISC on the 2312 is
C accessing them).

MFC after:	1 day
2001-10-06 19:19:24 +00:00
Doug Rabson
bb94354d67 Enable console. There are far too many 'ifdef __i386__' in this file. 2001-10-06 13:34:30 +00:00
Søren Schmidt
8975eded26 Update with latest ATA/ATAPI ver 6 rev 2 items. 2001-10-06 11:07:04 +00:00
Marcel Moolenaar
885f6ac360 Make this compile on ia64. 2001-10-06 09:27:43 +00:00
Peter Wemm
887f6fb8d4 Fix some 64-bit uncleanliness. 2001-10-06 04:09:26 +00:00
Peter Wemm
cd5178beb8 Fix some style bugs before fixing some real bugs. 2001-10-06 04:03:20 +00:00
Peter Wemm
555143d0df Fix a stack trashing bug when int != sizeof(pointer)
This fixes the ia64 boot!  We have scsi disks!
2001-10-06 03:49:38 +00:00
Doug Rabson
aa55386965 Re-route interrupts on ia64 so that we can get the I/O SAPIC interrupt
numbers (the BIOS leaves legacy PIC interrupt numbers in the intline
registers).
2001-10-05 10:33:42 +00:00
Warner Losh
239db728ab Regen. 2001-10-05 05:32:51 +00:00
Warner Losh
e9530498a7 MFNetBSD:
1.139: augustss; Add EigerLabs sound card.
	1.138: ichiro; Typo
	1.137: ichiro; GEMTEK CF-size WaveLAN card based on Prism2.5 eval
	1.136: ichiro; Symbol Spctrum24 LA4100 Series CF WaveLAN card
	1.135: pooka; Psion Gold Card
	1.134: christos; zonet zen (Henrik Berglund)
	1.133: christos; dlink-660+ (janberg@netbsd.org)
	1.132: itojun; 3Com 3CRWE62092A Wireless LAN
2001-10-05 05:32:27 +00:00
Mike Smith
43896e913a Update usage of AcpiEnableEvent to reflect a new argument.
Fix acpi_DeviceIsPresent to check for valid _STA data and to check
the "present" and "functioning" bits.

Use acpi_DeviceIsPresent in acpi_pcib rather than rolling our own
(also broken) version.
2001-10-04 23:21:09 +00:00
Søren Schmidt
c36c574aaa Update the promise raid structure with some of the info I've gathered
before I'm accused of "lending" it from somebody else.
2001-10-04 18:02:26 +00:00
Doug Rabson
b0ee13ad5a Add busspace hacks for ia64. 2001-10-04 08:33:16 +00:00
Doug Rabson
1983594568 Use return_PTR, not return_VALUE when returning pointers. 2001-10-04 08:32:18 +00:00
Doug Rabson
ed136da6f4 Check the compatible ID as well as the hardware ID in acpi_MatchHid. 2001-10-04 08:31:17 +00:00
Søren Schmidt
e55639dbdd Doh! committed from the wrong tree, this is the right "stuff"... 2001-10-03 11:36:25 +00:00
Søren Schmidt
7f6d63666d Proberly support the Promise TX2/4.
Programming info kindly provided by Daniela Engert <dani@ngrt.de>
2001-10-03 08:27:29 +00:00
Søren Schmidt
592fcea788 cosmetics in the bootverbose probe- 2001-10-03 08:25:37 +00:00
Søren Schmidt
9b7c4d4ea0 Hopefully fix the identify failed on ATAPI slaves on some notebooks. 2001-10-03 08:25:11 +00:00
Takanori Watanabe
c84f2b288e Add PnP ID 'IBM3781' for TP240 mouse. 2001-10-03 07:26:28 +00:00