concensus seems to be that is best left for doing post-install.
Discussed on: freebsd-current@
Tested with: make release
Approved by: re@
MFC after: 3 days
global variables. On ia64, save a pointer to the efi chunk as well.
o At the same time, change checkLabels() to define these globals instead
of having the caller of checkLabels() pass addresses to variables for
these. Change the two callers correspondingly.
o Spent a bit more time adjusting try_auto_label() to prepate for having
the EFI partition created on ia64.
o Remove efi_mountpoint(). The EFI chunk is now available without having
to iterate over the disks and chunks to find it every time we need it.
o On ia64, now that the root chunk is globally available, set the
vfs.root.mountfrom tunable in loader.conf. This avoids that one cannot
boot into FreeBSD after an install. The kernel cannot find the root
device without a little help...
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
that actually need it. This makes it easier for a platform porter to
find the files that may need tweaking to support whatever MD specific
partitioning is needed. It also helps to prevent that the libdisk API
gets exposed and/or used where it's not needed.
permitting the administrator to select a securelevel top operate
at. Include a helpfile summarizing some of the information from
init(8). This allows for explicit configuration of securelevels,
which was previously implicit in Security Profile selection.
Currently, there are no checkboxes for the active securelevel,
because sysinstall's facilities for deriving "current settings"
from rc.conf may use only one variable, not two, and I opted for
the simplest approach at this point.
Approved by: re (scottl)
selection is used to drive two configuration parameters:
(1) Default enable/disable for sshd
(2) Default enable/disable for securelevels
Replace this with an explicit choice to enable/disable sshd. A
follow-up commit will add a configuration option to the Security
post-install configuration menu to set the securelevel in rc.conf
explicitly. This should reduce the level of foot-shooting associated
with accidental enabling of securelevels, make the nature and
implications of the securelevel configuration options more explicit,
as well as make the choice to enable/disable sshd more explicit.
Approved by: re (scottl)
to better deal with the fact that we need an EFI partition and
that we need to have a mountpoint for it.
o When creating a new partition, add EFI to the list of types
the user can select from. This makes it easy to create an EFI.
o Do not include wizard.c on ia64.
o The user cannot create a partition on ia64 that's a multiple of
the cylinder size. We don't have a notion of cyclinders.
This option adds Postfix and Exim to the list, however, qmail is not added
due to license restrictions.
Collaborated with: Simon L. Nielsen <simon@nitro.dk>
Reviewed by: jhb, re@, -audit.
FreeBSD 5.1-RELEASE and later:
- newfs(8) will now create UFS2 file systems unless UFS1 is specifically
requested (-O1). To do this, I just twiddled the Oflag default.
- sysinstall(8) will now select UFS2 as the default layout for new
file systems unless specifically requested (use '1' and '2' to change
the file system layout in the disk labeler). To do this, I inverted
the ufs2 flag into a ufs1 flag, since ufs2 is now the default and
ufs1 is the edge case. There's a slight semantic change in the
key behavior: '2' no longer toggles, it changes the selection to UFS2.
This is very similar to a patch David O'Brien sent me at one point, and
that I couldn't find.
Approved by: re (telecon)
Reviewed by: mckusick, phk, bmah
'base' dist rename.
- Rework struct dist to allow for different types of dists. There are
currently three types of dists: DT_TARBALL, the traditonal gzipped and
split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in
the tree that has its own array of dists as its contents. For example,
the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE
dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table
that contains 'sbase', 'ssys', etc.
- Add helper macros for defining array entries for the different types of
dists to try and make the statically defined dist table in dist.c more
readable.
- Split the logic to deal with a DT_TARBALL dist out of distExtract()
and into its own distExtractTarball() function. distExtract() now
calls other functions to extract each dist.
- Tweak the percentage complete calculation in distExtractTarball() to
do the multiply prior to the divide so it doesn't have to use floating
point.
- Axe the installPackage() function along with the special handling for
the perl and XFree86 dists in distExtractAll() since distExtract()
handles package dists directly now.
- Add back in subdists for the X packages based on the split up packages
that XFree86-4 uses that as closely map to the X dists we used with
X 3.3.x.
- Lots of things like distSetX() and the X dist masks are no longer
#ifndef X_AS_PKG since we use them in both cases now.
- Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only
call it in that case anyways, and it's not suitable for the X_AS_PKG
case.
- Add in X dist menus for the X_AS_PKG case.
Approved by: re
load drivers from the driver floppy if the "driver_floppy" variable is set
in the kernel environment and call this function after probing devices but
before displaying the main menu.
X-MFC after: as soon as I finish committing to current
Approved by: re@ (blanket)
editor, in order to support specifying UFS2 as a newfs option.
(1) Support three different newfs types: NEWFS_UFS, NEWFS_MSDOS, and
NEWFS_CUSTOM. Don't mix up the arguments to them: you can't use
soft updates on an msdos file system.
(2) Distinguish adding new arguments to the newfs command line from
replacing it. Permit the addition of new arguments by the user for
NEWFS_UFS. If we entirely replace the command line provided by
sysinstall, call it NEWFS_CUSTOM. 'N' will now add additional
arguments; 'Z' will opt to replace the newfs command line entirely,
but will prompt the user with their current command line as a
starting point.
(3) Construct the newfs command line dynamically based on the options
provided by the user at label-time. Right now, this means selecting
UFS1 vs. UFS2, and the soft updates flag. Drop in some variables
to support ACLs and MAC Multilabel in the future also, but don't
expose them now.
This provides sysinstall with the ability to do more "in band" editing
of the newfs command line, so we can provide more support for the user,
but doesn't sacrifice the ability to entirely specify the newfs command
line of the user is willing to give up on the cushiness factor. It
also makes it easier for us to specify defaults in the future, and
define conditional behavior based on user configuration selections.
For now, we default to UFS1, and permit UFS2 to be used as the root
only on non-i386 systems.
While I was there, I dropped the default fragment and block sizes,
since newfs has much more sensible defaults now.
Reviewed by: jhb, marcel
Approved by: re
ia64 bits from: marcel
o Mount the EFI file system as msdosfs and not ufs as it's a FAT
file system. Introduce Mount_msdos() for this to go side-by-side
with Mount().
o Also, since mounting is performed as a command (which means it's
queued, sorted, lost, found and executed), we cannot create a
directory on the file system by calling mkdir. We must make sure
the mkdir happens after the mount. Introduce Mkdir_command() to
allow mkdir operations to be queued, sorted, lost, found and
executed as well.
Approved by: re (jhb, rwatson)
- Only declare mouse menus if WITH_MICE.
- Only declare syscons menus if WITH_SYSCONS.
- Only declare fdisk editor functions if WITH_SLICES.
Approved by: re
and more maintainable.
- WITH_SYSCONS: defined on all arch's that support syscons (currently i386,
alpha, and ia64)
- WITH_MICE: defined on all arch's that support moused(8) (currently i386,
alpha, and ia64)
- WITH_SLICES: defined on all arch's that use disk slices (currently i386
and ia64)
- WITH_LINUX: defined on all arch's that support Linux binary compat
(currently i386 and alpha)
Approved by: re
- Disabled 'Syscons, Font', 'Syscons, Screenmap' and 'Syscons, Ttys' menus
on pc98.
- Fixed the MenuMouseType and MenuMousePort menus for pc98.
- Fixed some comments for pc98.
Also add the ability to use Bzip'ed distributions -- but this is exclusive
of being able to use Gzip'ed distributions.
Sponsored by: FreeBSD Mall, Inc.
and pull configSecurityProfile under that menu. Add a menu option
to determine whether LOMAC is enabled at boot. Probably, eventually,
many of the 'Security Profile' menu choices should be pulled out
independently into the Security Menu, so as to make them individually
selectable.
Sponsored by: DARPA, NAI Labs
defaults both in regards to the size of the partitions that are created
and in regards to safety and functional separation.
Still TODO: extend the previous partition to cover a deleted partition
if the previous partiton was auto-created, and supply some sort of
solution for /tmp.
Reviewed by: Just about everyone
Approved by: Nobody except maybe my pet mouse fred
Obtained from: God, so complain to HIM
MFC after: 1 week
Since userconfig feature is implemented by tweaking variables (hint.*)
with loader(8), we can put back an equivalent feature. Maybe the first
step for this is to commit yokota-san's patch (add userconfig command
for loader).
Approved by: jkh
survive a sysinstall Ctrl-C -> 'Restart'. This fixes another annoying
bug where restarting sysinstall will try to reload kernel modules and
do other external things that have already been done. For now, use
these persistent variables to keep track of module, usbd, and pccardd
initialization.
Bug found by: rwatson
MFC after: 1 week
environment. This fixes an annoying bug where hitting Ctrl-C and
telling sysinstall to 'restart' will do no such thing since many of
the options are still set and so you won't be prompted for them
again.
MFC after: 1 week
