This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
Since we ship a ktls(4) enabled OpenSSL version, mention
the src.conf(5) option WITH_OPENSSL_KTLS in the manual page.
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28435
Currently, OpenCrypto consumers can request asynchronous dispatch by
setting a flag in the cryptop. (Currently only IPSec may do this.) I
think this is a bit confusing: we (conditionally) set cryptop flags to
request async dispatch, and then crypto_dispatch() immediately examines
those flags to see if the consumer wants async dispatch. The flag names
are also confusing since they don't specify what "async" applies to:
dispatch or completion.
Add a new KPI, crypto_dispatch_async(), rather than encoding the
requested dispatch type in each cryptop. crypto_dispatch_async() falls
back to crypto_dispatch() if the session's driver provides asynchronous
dispatch. Get rid of CRYPTOP_ASYNC() and CRYPTOP_ASYNC_KEEPORDER().
Similarly, add crypto_dispatch_batch() to request processing of a tailq
of cryptops, rather than encoding the scheduling policy using cryptop
flags. Convert GELI, the only user of this interface (disabled by
default) to use the new interface.
Add CRYPTO_SESS_SYNC(), which can be used by consumers to determine
whether crypto requests will be dispatched synchronously. This is just
a helper macro. Use it instead of looking at cap flags directly.
Fix style in crypto_done(). Also get rid of CRYPTO_RETW_EMPTY() and
just check the relevant queues directly. This could result in some
unnecessary wakeups but I think it's very uncommon to be using more than
one queue per worker in a given workload, so checking all three queues
is a waste of cycles.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28194
Handling of unknown MACs on an bridge with incomplete learning
capabilites (aka uplink ports) can be defined in different ways.
The classical approach is to broadcast unicast frames send to an
unknown MAC, because the unknown devices can be everywhere. This mode
is default for ng_bridge(4).
In the case of dedicated uplink ports, which prohibit learning of MAC
addresses in order to save memory and CPU cycles, the broadcast
approach is dangerous. All traffic to the uplink port is broadcasted
to every downlink port, too. In this case, it's better to restrict the
distribution of frames to unknown MAC to the uplink ports only.
In order to keep the chance small and the handling as natural as
possible, the first attached link is used to determine the behaviour
of the bridge: If it is an "uplink" port, then the bridge switch from
classical mode to restricted mode.
Reviewed By: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28487
The ng_bridge(4) node is designed to work in moderately small
environments. Connecting such a node to a larger network rapidly fills
the MAC table for no reason. It even become complicated to obtain data
from the gettable message, because the result is too large to
transmit.
This patch introduces, two new functionality bits on the hooks:
- Allow or disallow MAC address learning for incoming patckets.
- Allow or disallow sending unknown MACs through this hook.
Uplinks are characterized by denied learing while sending out
unknowns. Normal links are charaterized by allowed learning and
sending out unknowns.
Reviewed by: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23963
update mrsas(4) since big-endian is supported since
e34a057ca6
Reviewed by: bdragon, gbe
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28475
Glen (@gjb) noticed that I am haven't mentioned the authors of the
WireGuard device driver in the manual page.
This is commit addressed this commit.
Reviewed by: gjb, brueffer
Differential Revision: https://reviews.freebsd.org/D28464
X-MFC-with: e59d9cb412
libzfs has a dependency on libcrypto. This causes a buildworld link
failure when WITHOUT_OPENSSL/WITHOUT_CRYPT is set.
This dependency was added implicitly by the switch to OpenZFS, and
explicitly in 40d0fd2875 and cd568e2b1b.
PR: 252841
Reviewed by: kevans, freqlabs
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28431
This option has been equivalent to any form of C++ support since libstdc++
was removed. Therefore, replace all MK_LIBCPLUSPLUS uses with MK_CXX.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D27974
The argument passed to g_provider_by_name(9) can be a geom name or a
fullpath.
- g_provider_by_name() gained this functionality in
769afdc71e.
Reviewed by: imp, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27566
There's a third party dependency on this option; currently,
net/openldap24-{,sasl-}client. At least mention that an openldap from ports
is needed for this option.
PR: 252866
Reported-by: Build Option Survey via Michael Dexter
MFC-after: 3 days
Use hsctrl_load to load the module at boot time.
Submitted by: Shunchao Hu <ankohuu_outlook.com>
Reviewed by: wulf
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D28343
This is required to make use of KERN_TLS
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28405
This merges upstream patches from OpenSSL's master branch to add
KTLS infrastructure for TLS 1.0-1.3 including both RX and TX
offload and SSL_sendfile support on both Linux and FreeBSD.
Note that TLS 1.3 only supports TX offload.
A new WITH/WITHOUT_OPENSSL_KTLS determines if OpenSSL is built with
KTLS support. It defaults to enabled on amd64 and disabled on all
other architectures.
Reviewed by: jkim (earlier version)
Approved by: secteam
Obtained from: OpenSSL (patches from master)
MFC after: 1 week
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28273
- Document a constraint on the AAD size for AES-GCM.
- Note that the list of supported platforms and add-on devices is not
complete and indicate that QAT devices will show up in pciconf
output. [1]
PR: 252984 [1]
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Chained policing should be able to reuse the classification of
traffic. A new mbuf_tag type is defined to handle gereral QoS
marking. A new subtype is defined to track the color marking.
Reviewed by: manpages (bcr), melifaro, kp
Approved by: kp (mentor)
Sponsored by: IKS Service GmbH
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22110
With the upcoming usage from LinuxKPI but also from drivers
ported natively we are seeing more probing of various
firmware (names).
Add the ability to firmware(9) to silence the
"firmware image loading/registering errors" by adding a new
firmware_get_flags() functions extending firmware_get() and
taking a flags argument as firmware_put() already does.
Requested-by: zeising (for future LinuxKPI/DRM)
Sponsored-by: The FreeBSD Foundation
Sponsored-by: Rubicon Communications, LLC ("Netgate")
MFC after: 3 days
Reviewed-by: markj
Differential Revision: https://reviews.freebsd.org/D27413
This node is part of an A10-NSP (L2-BSA) development.
Carrier networks tend to stack three or more tags for internal
purposes and therefore hiding the service tags deep inside of the
stack. When decomposing such an access network frame, the processing
order is typically reversed: First distinguish by service, than by
other means.
This new netgragh node allows to bring the relevant VLAN in front (to
the out-most position). This way other netgraph nodes (like ng_vlan)
can operate on this specific type.
Reviewed by: manpages (gbe), brueffer (manpages), kp
Approved by: kp (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: IKS Service GmbH
Differential Revision: https://reviews.freebsd.org/D22076
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
This extends upon the RFC 6598 support to libalias/ipfw in r357092.
Reviewed By: manpages (bcr), donner, adrian, kp
Approved by: kp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23461
WITHOUT_LIBTHR has been broken for a little over five years now, since the
xz 5.2.0 update introduced a hard liblzma dependency on libthr, and building
a useful system without threading support is becoming increasingly more
difficult.
Additionally, in the five plus years that it's been broken more reverse
dependencies have cropped up in libzstd, libsqlite3, and libcrypto (among
others) that make it more and more difficult to reconcile the effort needed
to fix these options.
Remove the broken options.
PR: 252760
Reviewed by: brooks, emaste, kib
Differential Revision: https://reviews.freebsd.org/D28263
Summary:
Steps 5 and 9:
- Update Mentor and Mentee Information
- Update Ports with Personal Information
Reviewers: tcberner, fernape
Reviewed By: fernape
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D28281
This reverts commit bd72252aac.
The commit at hand breaks the build for all mips targets and does not
have a one-liner fix.
make[5]: "/usr/src/share/mk/sys.mk" line 169: Malformed conditional (${MACHINE_CPUARCH} == "mips" && ${COMPILER_TYPE} == "gcc")
Currently only amd64, i386 and powerpc build VirtIO modules, yet all other
architectures have at least one kernel configuration that includes the
transport drivers, and so they lack drivers for all the devices they don't
statically compile into the kernel. Instead, enable the build everywhere so all
architectures have the full set of device drivers available.
Reviewed by: bryanv (earlier version), imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D28058
Add separate sections for authentication algorithms, block ciphers,
stream ciphers, and AEAD algorithms. Describe properties commmon to
algorithms in each section to avoid duplication.
Use flat tables to list algorithm properties rather than nested
tables.
List implemented authentication algorithms.
Reviewed by: gbe (manpages)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27833
There is a report that reading of surface/button switch feature report
causes SYN1B7D touchpad malfunction. As specs does not require it to
be readable assume that report usages have default value on attach and
last written value during operation. Do not apply default usage values
on attachment and resume.
While here fix manpage typos and add avg@ to copyright header.
Reported by: Jakob Alvermark <jakob_AT_alvermark_DOT_net>
Reviewed by: avg
Differential revision: https://reviews.freebsd.org/D28196
