Summary:
Book-E and AIM trap.c are almost identical, except for a few bits. This is step
1 in unifying them.
This also renumbers EXC_DEBUG, to not conflict with AIM vector numbers. Since
this is the only one thus far that is used in the switch statement in trap(),
it's the only one renumbered. If others get added to the switch, which conflict
with AIM numbers, they should also be renumbered.
Reviewers: #powerpc, marcel, nwhitehorn
Reviewed By: marcel
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2215
executables. The goal here, not yet accomplished, is to let the e500 kernel
run under QEMU by setting KERNBASE to something that fits in low memory and
then having the kernel relocate itself at runtime.
have the same meaning and occupy the same memory address in the trapframe
courtesy of union. Avoid some pointless #ifdef by spelling them both 'DAR'
in the trapframe.
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.
PR: 193873
Differential Revision: https://reviews.freebsd.org/D904
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by: jhibbits (earlier version)
Sponsored by: EMC / Isilon Storage Division
When the FreeBSD kernel is loaded from Xen the symtab and strtab are
not loaded the same way as the native boot loader. This patch adds
three new global variables to ddb that can be used to specify the
exact position and size of those tables, so they can be directly used
as parameters to db_add_symbol_table. A new helper is introduced, so callers
that used to set ksym_start and ksym_end can use this helper to set the new
variables.
It also adds support for loading them from the Xen PVH port, that was
previously missing those tables.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
ddb/db_main.c:
- Add three new global variables: ksymtab, kstrtab, ksymtab_size that
can be used to specify the position and size of the symtab and
strtab.
- Use those new variables in db_init in order to call db_add_symbol_table.
- Move the logic in db_init to db_fetch_symtab in order to set ksymtab,
kstrtab, ksymtab_size from ksym_start and ksym_end.
ddb/ddb.h:
- Add prototype for db_fetch_ksymtab.
- Declate the extern variables ksymtab, kstrtab and ksymtab_size.
x86/xen/pv.c:
- Add support for finding the symtab and strtab when booted as a Xen
PVH guest. Since Xen loads the symtab and strtab as NetBSD expects
to find them we have to adapt and use the same method.
amd64/amd64/machdep.c:
arm/arm/machdep.c:
i386/i386/machdep.c:
mips/mips/machdep.c:
pc98/pc98/machdep.c:
powerpc/aim/machdep.c:
powerpc/booke/machdep.c:
sparc64/sparc64/machdep.c:
- Use the newly introduced db_fetch_ksymtab in order to set ksymtab,
kstrtab and ksymtab_size.
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
We continue to use pmap_enter() for that. For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.
Sponsored by: EMC / Isilon Storage Division
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
Open Firmware-centric:
- Keep the static list of regions in platform.c instead of ofw_machdep.c
- Move various merging and sorting operations to platform.c as well
- Move apple_hacks code out of ofw_machdep.c and into platform_powermac.c,
where it belongs
- Move CHRP-specific dynamic-reconfiguration memory parsing into
platform_chrp.c instead of pretending it is shared code
allows FPU emulation on AIM as well as providing support for the mfpvr
and lwsync instructions from userland on e500 cores. lwsync, in particular,
is required for many C++ programs to work correctly.
MFC after: 1 week
the actual FPU is enabled, while PCB_FPREGS indicates that the FPU state
structure in the PCB is valid. This separation reflects the situation on
FPU-less systems in which the FP state is used by the emulator but we don't
actually want to try to turn on the non-existant FPU.
Use this flag to save and restore FP regs properly on both AIM and Book-E.
As a side effect, this sets up hard-FP and Altivec on Book-E CPUs with such
abilities except for a trap handler to call enable_fpu()/enable_altivec().
it more flexible about how the CCSR range is found. With this change, the
stock MPC85XX will boot on a Routerboard 800.
Hardware donated by: Benjamin Perrault
PCPU fields for curthread, by doing the same to Book-E. This closes
some potential races switching between CPUs. As a side effect, it turns out
the AIM and Book-E swtch.S implementations were the same to within a few
registers, so move that to powerpc/powerpc.
MFC after: 3 months
add actual platform probing based on PVR. Still needs a little more work:
in particular, the CCRS setup should move here.
Also turn "bare" into a truly bare platform that doesn't pretend to know how
to do anything except get the memory map. This should also be enhanced to
process the FDT reserved memory list, but that is for another day.
previous KVA allocations (which the PMAP lazily invalidates) in TLB0 could
shadow device maps in TLB1. Add a big block comment about some of the
caveats with this approach.
device tree into r3. Rather than worrying about mapping that tree, reserving
its space in the global physical memory space, etc., just copy it to some
memory after the kernel.
- Remove explicit requirement that the SOC registers be found except as an
optimization (although the MPC85XX LAW drivers still require they be found
externally, which should change).
- Remove magic CCSRBAR_VA value.
- Allow bus_machdep.c's early-boot code to handle non 1:1 mappings and
systems not in real-mode or global 1:1 maps in early boot.
- Allow pmap_mapdev() on Book-E to reissue previous addresses if the
area is already mapped. Additionally have it check all mappings, not
just the CCSR area.
This allows the console on e500 systems to actually work on systems where
the boot loader was not kind enough to set up a 1:1 mapping before starting
the kernel.
is slightly more complicated and is left unimplemented for now. Also
prevent pmap_mapdev() from mapping over the kernel and KVA regions if
devices happen to have high physical addresses.
MFC after: 2 weeks
differed only with respect to the AIM version not following style(9) and
some additional features for 64-bit systems and machines with direct maps
in the AIM implementation that are no-ops on Book-E (at least for now).
there as "kern.ipc.sendfile.readahead".
- Push all nsfbuf related tunables into MD code. Don't move them
to new namespace in favor of POLA.
Reviewed by: scottl
Approved by: re (gjb)
pmap_clear_reference() has had exactly one caller in the kernel for
several years, more precisely, since FreeBSD 8. Now, that call no
longer exists.
Approved by: re (kib)
Sponsored by: EMC / Isilon Storage Division
which is the part of struct vmspace, allocated from UMA_ZONE_NOFREE
zone. Initialize the pmap lock in the vmspace zone init function, and
remove pmap lock initialization and destruction from pmap_pinit() and
pmap_release().
Suggested and reviewed by: alc (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
o Relax locking assertions for pmap_enter_object() and add them also
to architectures that currently don't have any
o Introduce VM_OBJECT_LOCK_DOWNGRADE() which is basically a downgrade
operation on the per-object rwlock
o Use all the mechanisms above to make vm_map_pmap_enter() to work
mostl of the times only with readlocks.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
pages around, taking array of vm_page_t both for source and
destination. Starting offsets and total transfer size are specified.
The function implements optimal algorithm for copying using the
platform-specific optimizations. For instance, on the architectures
were the direct map is available, no transient mappings are created,
for i386 the per-cpu ephemeral page frame is used. The code was
typically borrowed from the pmap_copy_page() for the same
architecture.
Only i386/amd64, powerpc aim and arm/arm-v6 implementations were
tested at the time of commit. High-level code, not committed yet to
the tree, ensures that the use of the function is only allowed after
explicit enablement.
For sparc64, the existing code has known issues and a stab is added
instead, to allow the kernel linking.
Sponsored by: The FreeBSD Foundation
Tested by: pho (i386, amd64), scottl (amd64), ian (arm and arm-v6)
MFC after: 2 weeks
