We don't need to check if casper is present, this is done in the library itself.
Reviewed by: emaste, cem, ed
Differential Revision: https://reviews.freebsd.org/D8754
When -c is specified, the system will be power cycled if the
underlying hardware supports it. Otherwise the system will be halted
or rebooted depending on which command was used.
Sponsored by: Netflix
Printing the entire log page is causing confusion over available
slots. Report only those slots that are valid. In the case where the
firmware download isn't supported, assume that only the first slot is
valid (I have no hardware to test this assumption though)
Sponsored by: Netflix
When using a kernel built with the GZIO config option, dumpon -z can be
used to configure gzip compression using the in-kernel copy of zlib.
This is useful on systems with large amounts of RAM, which require a
correspondingly large dump device. Recovery of compressed dumps is also
faster since fewer bytes need to be copied from the dump device.
Because we have no way of knowing the final size of a compressed dump
until it is written, the kernel will always attempt to dump when
compression is configured, regardless of the dump device size. If the
dump is aborted because we run out of space, an error is reported on
the console.
savecore(8) is modified to handle compressed dumps and save them to
vmcore.<index>.gz, as it does when given the -z option.
A new rc.conf variable, dumpon_flags, is added. Its value is added to
the boot-time dumpon(8) invocation that occurs when a dump device is
configured in rc.conf.
Reviewed by: cem (earlier version)
Discussed with: def, rgrimes
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11723
The build was broken on GCC-using architectures with:
growfs.c: In function 'cgckhash':
growfs.c:1753: warning: old-style function definition
Sponsored by: The FreeBSD Foundation
This makes the needed changes to add/update cylinder group check hashes
when a filesystem is expanded.
Reported by: kib and Warner Losh (imp)
Reviewed by: kib
Tested by: Peter Holm (pho)
^/head@r323923 changed when MODIFIED is printed at exit. It's better to follow the
documented way of determining whether or not a filesystem is clean per fsck_ffs, i.e.,
ensure that the exit code is either 0 or 7.
The pass/fail determination is brittle prior to this commit, and ^/head@r323923 made
the issue apparent -- thus this needs to be fixed independent of ^/head@r323923.
PR: 222780
MFC after: 1 week
MFC with: r323923
Reported by: Jenkins
'last' is the sector number of the last usable sector. Sector
numbers start with 0. As such, 'last' is always 1 less than
the count of sectors and aligning 'last' down as-is means that
the number of free sectors is pessimized by 'alignment - 1' if
the number of usable sectors was already a multiple of the
alignment. Consequently, gpart(8) failed to create a partition
when the alignment and size were such that it would extend to
the end of the disk.
In r231994, an attempt was made to fix crypt(3) failure returns (NULL).
However, instead of treating crypt(3) failure as authentication failure,
some of the changes treated crypt(3) failure as authentication success.
This is wrong.
r324225 fixed this for ppp, which also inspired this review. The other
changes in the 231994 revision were audited for correctness and look ok.
Reviewed by: jhb
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12571
Existing scripts and associated config such as rc.initdiskless, rc.d/var,
and others, use mdmfs to create memory filesystems. That program accepts a
size argument which allows SI suffixes and treats an unsuffixed number as a
count of 512 byte sectors. That makes it difficult to convert existing
scripts to use tmpfs instead of mdmfs, because tmpfs treats unsuffixed
numbers as a count of bytes. The script logic to deal with existing user
config that might include suffixed and unsuffixed numbers is... unpleasant.
Also, there is no g'tee that tmpfs will be available. It is sometimes
configured out of small-resource embedded systems to save memory and flash
storage space.
These changes enhance mdmfs(8) so that it accepts two new values for the
'md-device' arg: 'tmpfs' and 'auto'. With tmpfs, the program always uses
tmpfs(5) (and fails if it's not available). With 'auto' the program prefers
tmpfs, but falls back to using md(4) if tmpfs isn't available. It also
handles the -s <size> argument so that the mdconfig interpetation of
unsuffixed numbers applies when tmpfs is used as well, so that existing user
config keeps working after a switch to tmpfs.
A new rc setting, mfs_type, is added to etc/defaults/rc.conf to let users
force the use of tmpfs or md; the default value is "auto".
Differential Revision: https://reviews.freebsd.org/D12301
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
partitioning scheme.
Users often get confused and frustrated when trying to delete partition
table and getting ``Device busy'' error because they forgot (or did not
ever know that they have) to delete all its partitions first, and while
the manual page mentions this briefly, it does not stress it out enough.
Approved by: ae, manpages (bjk)
PR (as inspiration): 196102
Differential Revision: https://reviews.freebsd.org/D12336
Any geom class using g_metadata_store, as well as geom_virstor which
duplicated g_metadata_store internally, would dump sectorsize - mdsize bytes
of userspace memory following the metadata block stored. This is most or all
geom classes (gcache, gconcat, geli, gjournal, glabel, gmirror, gmultipath,
graid3, gshsec, gstripe, and geom_virstor).
PR: 222077 (comment #3)
Reported by: Maxim Khitrov <max AT mxcrypt.com>
Reviewed by: des
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12269
superblocks created in revision 322297 only works on disks
with sector sizes up to 4K. This update allows the recovery
information to be created by newfs and used by fsck on disks
with sector sizes up to 64K. Note that FFS currently limits
filesystem to be mounted from disks with up to 8K sectors.
Expanding this limitation will be the subject of another
commit.
Reported by: Peter Holm
Reviewed with: kib
This feature comes from the fact that we rely memory-backed md(4)
in our build process heavily. However, if the build goes haywire
the allocated resources (i.e. swap and memory-backed md(4)'s) need
to be purged. It is extremely useful to have ability to attach
arbitrary labels to each of the virtual disks so that they can
be identified and GC'ed if neecessary.
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D10457
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
unable to automatically find alternate superblocks. This checkin
places the information needed to find alternate superblocks to the
end of the area reserved for the boot block.
Filesystems created with a newfs of this vintage or later will
create the recovery information. If you have a filesystem created
prior to this change and wish to have a recovery block created for
your filesystem, you can do so by running fsck in forground mode
(i.e., do not use the -p or -y options). As it starts, fsck will
ask ``SAVE DATA TO FIND ALTERNATE SUPERBLOCKS'' to which you should
answer yes.
Discussed with: kib, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11589
a mismatch, but will allow fsck to continue when the last alternate
superblock gets corrupted somehow.
Also, remove searching for alternate super blocks. It should have been
removed two years ago with r276737 by imp@. Leave minor vestiges in
place in case someone wants to solve the hard problem of knowing where
altnernate superblocks live without access to data formerly stored in
disklabels.
Differential Revision: https://reviews.freebsd.org/D11589
ifconfig(8) printing the hwaddr is only really useful if it differs from
the link layer address.
Reported by: jhb
Reviewed by: rpokala
Approved by: rstone (mentor)
Differential Revision: https://reviews.freebsd.org/D11777
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
The intent is to skip expensive opaque sysctls like tcp_pcblist unless
they are explicitly requested. Sysctl nodes like this don't show up in
sysctl -a, but they do generate output that winds up being dropped,
unless the user specifically requested binary/hex output or opaques.
This reduces the runtime of sysctl in many circumstances on a loaded
system. It also reduces the likelihood that simply gathering
diagnostics on a sick machine (stuck lock, etc) via sysctl -a might
push it over the edge into a total lockup.
Reviewed by: jtl
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D11461
point.
The new "-N" option does a forced dismount of an NFS mount point, but avoids
doing any checking of the mounted-on path, so that it will not get hung
when a vnode lock is held by another hung process on the mounted-on vnode.
The most common case of this is a "umount" with the "-f" option.
Other than avoiding checking the mounted-on path, it performs the same
forced dismount as a successful "umount -f" would do.
This commit includes a content change to the man page.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11735
Copy the most important test cases from OpenBSD's corresponding
src/regress/sbin/pfctl, those that run pfctl on a test input file and check
correctness of its output. We have also added some new tests using the same
format.
The tests consist of a collection of input files (pf*.in) and
corresponding output files (pf*.ok). We run pfctl -nv on the input
files and check that the output matches the output files. If any
discrepancy is discovered during future development in the source
tree, we know that a regression bug has been introduced into the tree.
Submitted by: paggas
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11322
