Commit Graph

15201 Commits

Author SHA1 Message Date
Warner Losh
da271ed509 Remove the portibility layer goo.
Produces the same .o as before.

md5 by: /sbin/md5
2006-09-06 21:53:28 +00:00
Warner Losh
ec2b5cd830 jhb points out that these mallocs don't need to be checked because
of M_WAITOK.
2006-09-06 20:22:43 +00:00
Warner Losh
14ca3cd6ff MFp4: check the return value of malloc and report an error when invalid. 2006-09-06 19:46:02 +00:00
Matt Jacob
b2d24734cd The poison pill of death: adding a target mode reply handler and target
resources to a non-FC card killed us dead. Sorry for the breakage since
last July 12.
2006-09-05 23:53:07 +00:00
Matt Jacob
9af877a146 Coverity: initialize some variables before potential use. 2006-09-05 20:28:28 +00:00
Marcel Moolenaar
1d860a7ee5 Add SIIG 4 port serial card based on the Oxford OX16PCI954. 2006-09-04 18:27:14 +00:00
Michael Reifenberger
592777f6b6 Add locking to vge_ifmedia_upd().
With this WD-timeouts for vge(4) got reduced signifficantly.
Testet on -stable.

Submitted by:	Oleg Bulyzhin
MFC after:	1 day
2006-09-04 13:14:44 +00:00
Doug White
9aeef36608 Avoid an infinite loop in empty_both_buffers() by adding a timeout.
This helps systems that don't actually have atkbd controllers, such as the Intel
SBX82 blade, boot without device.hints hacks.

Hardware for this fix provided by iXsystems.

PR:		94822
Submitted by:	Devon H. O'Dell <devon.odell@coyotepoint.com>
MFC After:	3 days
2006-09-04 00:19:31 +00:00
Hajimu UMEMOTO
d45564dcfe Support Celsius (nn.nC), Fahrenheit (nn.nF) and Kelvin (nnnn) to
specify temperature.

Reviewed by:	njl
MFC after:	3 days
2006-09-03 15:10:04 +00:00
Matt Jacob
198b33587b Restore multi-version cleanliness. 2006-09-03 01:26:55 +00:00
John-Mark Gurney
378f231e7d add a newbus method for obtaining the bus's bus_dma_tag_t... This is
required by arches like sparc64 (not yet implemented) and sun4v where there
are seperate IOMMU's for each PCI bus...  For all other arches, it will
end up returning NULL, which makes it a no-op...

Convert a few drivers (the ones we've been working w/ on sun4v) to the
new convection...  Eventually all drivers will need to replace the parent
tag of NULL, w/ bus_get_dma_tag(dev), though dev is usually different for
each driver, and will require hand inspection...

Reviewed by:	scottl (earlier version)
2006-09-03 00:27:42 +00:00
Søren Schmidt
adf1bdac4f Add support for VIA 8237A. 2006-09-02 12:55:42 +00:00
David Christensen
21c9e4077a /tmp/cvsleYf6y 2006-09-01 22:30:56 +00:00
Marius Strobl
55d3a2fcc5 Fix spelling in a status message.
MFC after:	1 day
2006-09-01 20:14:06 +00:00
Marius Strobl
e70415b38e Fix spelling and wording in a comment. 2006-09-01 20:12:12 +00:00
John Baldwin
7269aec456 Comment tweaks. 2006-09-01 16:11:50 +00:00
John Baldwin
acda5dd92a - Use pci_enable_busmaster() and pci_enable_io() to update the command
register.  This really shouldn't be using pci_enable_io() directly as
  bus_alloc_resource() does it already, but the cached copy of the
  command word needs to be correct so the enable/disable mwi functions
  work properly.
- Use pci bus accessors to read revision ID and subvendor IDs.

Reviewed by:	jvogel
2006-09-01 16:11:12 +00:00
John Baldwin
34de220dcf Add locking to the ifmedia callouts.
Reviewed by:	jvogel, yongari
2006-09-01 16:08:36 +00:00
Gleb Smirnoff
824d7cd2cc Fix my error in rev. 1.109.
Submitted by:	jhb
Pointy hat to:	glebius
2006-09-01 09:56:24 +00:00
Matt Jacob
8070de6398 More ispfwfunc definitions funnies which break pre-7.0 builds. 2006-09-01 05:03:42 +00:00
Matt Jacob
784ed7076c Add missing pre-7.0 firmware pointer. Oops. 2006-09-01 04:57:14 +00:00
Matt Jacob
54256b0109 fix bug in 2322 receive sequencer f/w load 2006-09-01 04:18:17 +00:00
Eric Anholt
c88bc907e7 Add support for another ATI IGP 340M (RS200M) AGP bridge.
PR:		kern/100958
Submitted by:	Kazuo Dohzono <dohzono@axion-software.com>
MFC after:	1 week
2006-09-01 02:22:17 +00:00
John Baldwin
9555b0e2fc Just foward declare 'struct adapter' instead of declaring an actual
'adapter' structure.
2006-08-31 18:50:16 +00:00
John Baldwin
7f0875cc0f Compare the correct field against NULL when determining whether or not to
do bus_teardown_intr().
2006-08-31 18:49:41 +00:00
Pyun YongHyeon
73810ef739 Add PHY support for BCM5752.
Tested by:	delphij, Ganbold < ganbold AT micom DOT mng DOT net >
2006-08-31 11:15:18 +00:00
Pyun YongHyeon
d58d1737d6 Add Broadcom BCM5752 PHY id. 2006-08-31 11:13:51 +00:00
Ralf S. Engelschall
43109e5833 Fix typos: s/rebulid/rebuild/
Submitted by: Christoph Schug <chris@schug.net>
2006-08-31 08:45:44 +00:00
Søren Schmidt
4f991fd676 Properly initialize the nVidia MCP5X interrupts etc.
Suggested by:	nVidia
2006-08-30 11:50:22 +00:00
Jung-uk Kim
19a388e651 Restore Digital Outpur Register (DOR) for enhanced controller after reset. 2006-08-29 18:19:39 +00:00
Matt Jacob
9b2027cec5 Add QLogic 2400 (4Gb) firmware. 2006-08-26 18:39:18 +00:00
Søren Schmidt
9e34f8233b Properly initialize and destroy the RAID lock.
Also dont mess with RAID's thats not attached yet and avoid panic.
2006-08-25 09:33:56 +00:00
Marius Strobl
2afacffb3a Remove the DPMS code in creator_blank_display(), as it causes some
LCDs to blink in the V_DISPLAY_ON case, at least in combination with
some 13W3-VGA-adaptors (what's exactly going on is unclear though,
as it happens when all of H-sync, V-sync and video output are enabled
and not touching the sync bits from the preset fixes it). Thus
creator_blank_display() now is reduced to turning the video output
on/off.
Although that DPMS code did what the XFree86/Xorg sunffb(4x) does,
it was questionable in the first place, as both implementations
also turn(ed) off the video output on standby and suspend, thus most
likely causing the monitor to turn off instead of entering standby
or suspend as intended (at least my monitors don't).

Reported and tested by:	Patrick Reich
MFC after:		3 days
2006-08-24 22:00:24 +00:00
Oleg Bulyzhin
67d5e043d2 Properly lock ifmedia callbacks. This should prevent concurrent access to PHY.
Following issues should be resolved:
- random watchdog timeouts (caused by concurrent phy access)
- some link state issues
- non working TX if media type was set explicitly

PR:		kern/98738
Approved by:	glebius (mentor)
MFC after:	2 weeks
2006-08-24 14:41:16 +00:00
Gleb Smirnoff
42953da8a7 Pack several boolean fields into single bge_flags field. 2006-08-23 15:37:07 +00:00
Gleb Smirnoff
652ae483f8 Pack several boolean fields into single bge_flags field. 2006-08-23 11:32:54 +00:00
Pyun YongHyeon
c68ea28fe1 It seems that em(4) misses Tx completion interrupts under certain
conditions. The cause of missing Tx completion interrupts comes from
Tx interrupt moderation mechanism(delayed interrupts) or chipset bug.
If Tx interrupt moderation mechanism is the cause of false watchdog
timeout error we should have to fix all device drivers that have Tx
interrupt moderation capability. We may need more investigation
for this issue. Anyway, the fix is the same for both cases.

This should fix occasional watchdog timeout errors seen on a few
systems.

Reported by:	-net, Patrick M. Hausen < hausen AT punkt DOT de >
Tested by:	Patrick M. Hausen < hausen AT punkt DOT de >
2006-08-22 02:32:48 +00:00
Jung-uk Kim
668e25a26c Use aperture base address from north bridge. Some BIOS does not encode
misc. control registers correctly and it is inconsistent with north bridge.
In fact, there are too many broken BIOS implementations out there and we
cannot fix every possible combination but at least it is consistent with
what we advertise with ioctl(2).
2006-08-21 19:10:58 +00:00
Warner Losh
2c3538b83a Minor style(9) treatment to make things a little more consistant
within iicbus code.
2006-08-21 17:32:50 +00:00
Matt Jacob
2298c14c62 Fix RELENG_4 code version- isp_roles wasn't getting initialized so
it ended up defaulting to ISP_ROLE_NONE. My testing hadn't caught it
because I was deliberatly setting role via ioctl.

Thanks to user Toni for lending me an alpha to test this on.

MFC after:	0 days
2006-08-21 00:46:10 +00:00
Gleb Smirnoff
6909dc43c5 bge_cksum_pad() can modify the mbuf, thus call it before bus_dmamap_load().
Submitted by:	yongari
2006-08-18 13:53:53 +00:00
Søren Schmidt
97c9f9ff21 Update JMicron support to also work with chips where the PATA and SATA
parts are on individual PCI functions.

HW donated by: JMicron
2006-08-18 09:56:12 +00:00
Warner Losh
39926f1ff3 Appened ull to a really large integer constant to fix build on i386 2006-08-18 00:01:29 +00:00
Warner Losh
1a3c917f9d while (0); -> while (0) in multi-line macros 2006-08-17 22:50:33 +00:00
Warner Losh
5657c870dc Don't put a ; after while (0)
Submitted by:	jmg
2006-08-17 22:42:56 +00:00
Gleb Smirnoff
676ad2c9ef Rewrite bge_encap() so that it takes mbuf ** argument. In this case if
m_defrag(9) changes pointer we can show this to our caller.

Reviewed by:	yongari
2006-08-17 09:53:04 +00:00
Pyun YongHyeon
0c3e46f4eb Don't update Rx descriptor status in two different functions.
Suggested by:	pdeuskar
Reviewed by:	pdeuskar
2006-08-16 23:55:34 +00:00
Pyun YongHyeon
03923cd3d2 Add inverted amplifier sense quirks for Compaq Presario B3800
Reported by:	Nick Withers < nick AT nickwithers DOT com >
Tested by:	Nick Withers < nick AT nickwithers DOT com >
No objection from:	ariff
MFC after:	1 week
2006-08-15 07:37:41 +00:00
Julian Elischer
772b4799a4 Remove extra '*/' comment close. In code not normally compiled but a bug never the less. 2006-08-15 04:56:29 +00:00
Søren Schmidt
e7de1a3978 Add support for the ICH8 and ESB2 chips, also add a few other missing ICH7 parts.
HW donated by:	JMicron
2006-08-14 19:39:33 +00:00