to the Intel SDM vectors 16 through 255 are allowed to be delivered via the
local APIC.
Reported by: Leon Dang (ldang@nahannisys.com)
MFC after: 2 weeks
unroll the loop in ENTRY(pagezero)
acc' to the submitter this results in a reproducible 1% perf
improvement under buildworld like workload
I validated correctness and run-testing, but not performance impact
Submitted by: lidl@pix.net
Reviewed by: adrian
PR: 199151
MFC After: 1 month
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
%rdi, %rsi, etc are inadvertently bypassed along with the check to
see if the instruction needs to be repeated per the 'rep' prefix.
Add "MOVS" instruction support for the 'MMIO to MMIO' case.
Reviewed by: neel
on Intel processors. Clear spurious dependency by explicitely xoring
the destination register of popcnt.
Use bitcount64() instead of re-implementing SWAR locally, for
processors without popcnt instruction.
Reviewed by: jhb
Discussed with: jilles (previous version)
Sponsored by: The FreeBSD Foundation
rather than 20. The MP 1.4 specification states in Appendix B.2:
"A period of 20 microseconds should be sufficient for IPI dispatch to
complete under normal operating conditions".
(Note that this appears to be separate from the 10 millisecond (INIT) and
200 microsecond (STARTUP) waits after the IPIs are dispatched.) The
Intel SDM is silent on this issue as far as I can tell.
At least some hardware requires 60 microseconds as noted in the PR, so
bump this to 100 to be on the safe side.
PR: 197756
Reported by: zaphod@berentweb.com
MFC after: 1 week
originated from the return to usermode. #ss must be handled same as
#np.
Reported by: Andrew Lutomirski through secteam
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
code segment base address.
Also if an instruction doesn't support a mod R/M (modRM) byte, don't
be concerned if the CPU is in real mode.
Reviewed by: neel
translation. In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly. Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.
KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.
For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.
Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.
Some interrupts are configured before IR is initialized, e.g. ACPI
SCI. Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled. There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.
Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR. Use the same identification methods
as employed by Linux.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Discussed with: jhb
Tested by: glebius, pho (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Split the driver into independent pf and vf loadables. This is
in preparation for SRIOV support which will be following shortly.
This also allows us to keep a seperate revision control over the
two parts, making for easier sustaining.
- Make the TX/RX code a shared/seperated file, in the old code base
the ixv code would miss fixes that went into ixgbe, this model
will eliminate that problem.
- The driver loadables will now match the device names, something that
has been requested for some time.
- Rather than a modules/ixgbe there is now modules/ix and modules/ixv
- It will also be possible to make your static kernel with only one
or the other for streamlined installs, or both.
Enjoy!
Submitted by: jfv and erj
This makes FreeBSD guest to not avoid using LAPIC timer, preferring HPET
due to worries about non-existing for virtual CPUs deep sleep states.
Benchmarks of usleep(1) on guest and host show such extra latencies:
- 51us for virtual HPET,
- 22us for virtual LAPIC timer,
- 22us for host HPET and
- 3us for host LAPIC timer.
MFC after: 2 weeks
- fix warning about comparison of 'uint8_t v_tpr >= 0' always being true.
- fix error triggered by an empty clobber list in the inline assembly for
"clgi" and "stgi"
- fix error when compiling "vmload %rax", "vmrun %rax" and "vmsave %rax". The
gcc assembler does not like the explicit operand "%rax" while the clang
assembler requires specifying the operand "%rax". Fix this by encoding the
instructions using the ".byte" directive.
Reported by: julian
MFC after: 1 week
Implement the interace to create SR-IOV Virtual Functions (VFs).
When a driver registers that they support SR-IOV by calling
pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov
for that device. An ioctl can be invoked on that device to
create VFs and have the driver initialize them.
At this point, allocating memory I/O windows (BARs) is not
supported.
Differential Revision: https://reviews.freebsd.org/D76
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Allow the ppt driver to attach to devices that were hinted to be
passthrough devices by the PCI code creating them with a driver
name of "ppt".
Add a tunable that allows the IOMMU to be forced to be used. With
SR-IOV passthrough devices the VFs may be created after vmm.ko is
loaded. The current code will not initialize the IOMMU in that
case, meaning that the passthrough devices can't actually be used.
Differential Revision: https://reviews.freebsd.org/D73
Reviewed by: neel
MFC after: 1 month
Sponsored by: Sandvine Inc.
x2APIC mode is detected and enabled. Current theory is that switching
the APIC mode while an IPI is in flight might be the issue.
Postpone switching to x2APIC mode until we are guaranteed that all
starting IPIs are already send and aknowledged. Use aps_ready signal
as an indication that the BSP is done with us.
Tested by: adrian
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
capability of VT-x. This lets bhyve run nested in older VMware versions that
don't support the PAT save/restore capability.
Note that the actual value programmed by the guest in MSR_PAT is irrelevant
because bhyve sets the 'Ignore PAT' bit in the nested PTE.
Reported by: marcel
Tested by: Leon Dang (ldang@nahannisys.com)
Sponsored by: Nahanni Systems
MFC after: 2 weeks
FPU state to avoid passing a negative length to fpusetregs() / npxsetregs().
Differential Revision: https://reviews.freebsd.org/D1861
Reviewed by: kib, emaste
Remove unneeded disable of LAPIC in the native_lapic_xapic_mode(). We
attempt to send wakeup IPI on the resume path right after BSP wakeup,
so disabling is wrong.
Reported and tested by: glebius, "Ranjan1018 ." <214748mv@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
hw.x2apic_enable tunable allows disabling it from the loader prompt.
To closely repeat effects of the uncached memory ops when accessing
registers in the xAPIC mode, the x2APIC writes to MSRs are preceeded
by mfence, except for the EOI notifications. This is probably too
strict, only ICR writes to send IPI require serialization to ensure
that other CPUs see the previous actions when IPI is delivered. This
may be changed later.
In vmm justreturn IPI handler, call doreti_iret instead of doing iretd
inline, to handle corner conditions.
Note that the patch only switches LAPICs into x2APIC mode. It does not
enables FreeBSD to support > 255 CPUs, which requires parsing x2APIC
MADT entries and doing interrupts remapping, but is the required step
on the way.
Reviewed by: neel
Tested by: pho (real hardware), neel (on bhyve)
Discussed with: jhb, grehan
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Intel Multiprocessor Specification v1.4. The Intel SDM claims that
the INIT IPIs here are invalid, but other systems follow the MP
spec instead.
While here, fix the IPI wait routine to accept a timeout in microseconds
instead of a raw spin count, and don't spin forever during AP startup.
Instead, panic if a STARTUP IPI is not delivered after 20 us.
PR: 196542
Differential Revision: https://reviews.freebsd.org/D1719
MFC after: 2 weeks
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.
Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by: royger (eariler version)
MFC after: 1 month
const. On x86, even after the machine context is supposedly read into
the struct ucontext, lazy FPU state save code might only mark the FPU
data as hardware-owned. Later, set_fpcontext() needs to fetch the
state from hardware, modifying the *mcp.
The set_mcontext(9) is called from sigreturn(2) and setcontext(2)
implementations and old create_thread(2) interface, which throw the
*mcp out after the set_mcontext() call.
Reported by: dim
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Current code requires that the first physical memory segment starts at 0,
but this is not really needed. We only need to make sure the bootstrap code
and page tables for APs are allocated below 4GB.
This patch removes this requirement and allows booting a Dell R710 from
UEFI, where the first physical memory segment starts at 0x10000.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D1417
each GB of RAM tested so people watching the console can see that
the machine is making progress and not hung.
PR: 196650
Submitted by: Ravi Pokala <rpokala@panasas.com>
Suggestions from: Eric van Gyzen <eric@vangyzen.net>
MFC after: 2 weeks
These instructions are emitted by 'bus_space_read_region()' when accessing
MMIO regions.
Since MOVS can be used with a repeat prefix start decoding the REPZ and
REPNZ prefixes. Also start decoding the segment override prefix since MOVS
allows overriding the source operand segment register.
Tested by: tychon
MFC after: 1 week
Keep track of the next instruction to be executed by the vcpu as 'nextrip'.
As a result the VM_RUN ioctl no longer takes the %rip where a vcpu should
start execution.
Also, instruction restart happens implicitly via 'vm_inject_exception()' or
explicitly via 'vm_restart_instruction()'. The APIs behave identically in
both kernel and userspace contexts. The main beneficiary is the instruction
emulation code that executes in both contexts.
bhyve(8) VM exit handlers now treat 'vmexit->rip' and 'vmexit->inst_length'
as readonly:
- Restarting an instruction is now done by calling 'vm_restart_instruction()'
as opposed to setting 'vmexit->inst_length' to 0 (e.g. emulate_inout())
- Resuming vcpu at an arbitrary %rip is now done by setting VM_REG_GUEST_RIP
as opposed to changing 'vmexit->rip' (e.g. vmexit_task_switch())
Differential Revision: https://reviews.freebsd.org/D1526
Reviewed by: grehan
MFC after: 2 weeks
Implement a subset of the multiboot specification in order to boot Xen
and a FreeBSD Dom0 from the FreeBSD bootloader. This multiboot
implementation is tailored to boot Xen and FreeBSD Dom0, and it will
most surely fail to boot any other multiboot compilant kernel.
In order to detect and boot the Xen microkernel, two new file formats
are added to the bootloader, multiboot and multiboot_obj. Multiboot
support must be tested before regular ELF support, since Xen is a
multiboot kernel that also uses ELF. After a multiboot kernel is
detected, all the other loaded kernels/modules are parsed by the
multiboot_obj format.
The layout of the loaded objects in memory is the following; first the
Xen kernel is loaded as a 32bit ELF into memory (Xen will switch to
long mode by itself), after that the FreeBSD kernel is loaded as a RAW
file (Xen will parse and load it using it's internal ELF loader), and
finally the metadata and the modules are loaded using the native
FreeBSD way. After everything is loaded we jump into Xen's entry point
using a small trampoline. The order of the multiboot modules passed to
Xen is the following, the first module is the RAW FreeBSD kernel, and
the second module is the metadata and the FreeBSD modules.
Since Xen will relocate the memory position of the second
multiboot module (the one that contains the metadata and native
FreeBSD modules), we need to stash the original modulep address inside
of the metadata itself in order to recalculate its position once
booted. This also means the metadata must come before the loaded
modules, so after loading the FreeBSD kernel a portion of memory is
reserved in order to place the metadata before booting.
In order to tell the loader to boot Xen and then the FreeBSD kernel the
following has to be added to the /boot/loader.conf file:
xen_cmdline="dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga"
xen_kernel="/boot/xen"
The first argument contains the command line that will be passed to the Xen
kernel, while the second argument is the path to the Xen kernel itself. This
can also be done manually from the loader command line, by for example
typing the following set of commands:
OK unload
OK load /boot/xen dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga
OK load kernel
OK load zfs
OK load if_tap
OK load ...
OK boot
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D517
For the Forth bits:
Submitted by: Julien Grall <julien.grall AT citrix.com>
only compile in those options in GENERIC that cannot be loaded as
modules. ufs is still included because many of its options aren't
present in the kernel module. There's some other exceptions documented
in the file. This is part of some work to get more things
automatically loading in the hopes of obsoleting GENERIC one day.
VM_INJECT_EXCEPTION ioctl. However it morphed into other uses like keeping
track pending exceptions for a vcpu. This in turn causes confusion because
some fields in 'struct vm_exception' like 'vcpuid' make sense only in the
ioctl context. It also makes it harder to add or remove structure fields.
Fix this by using 'struct vm_exception' only to communicate information
from userspace to vmm.ko when injecting an exception.
Also, add a field 'restart_instruction' to 'struct vm_exception'. This
field is set to '1' for exceptions where the faulting instruction is
restarted after the exception is handled.
MFC after: 1 week
For /dev/mem, when requested physical address is not accessible by the
direct map, do temporal remaping with the caching attribute
'uncached'. Limit the accessible addresses by MAXPHYADDR, since the
architecture disallowes writing non-zero into reserved bits of ptes
(or setting garbage into NX).
For /dev/kmem, only access existing kernel mappings for direct map
region. For all other addresses, obtain a physical address of the
mapping and fall back to the /dev/mem mechanism. This ensures that
/dev/kmem i/o does not fault even if the accessed region is changed in
parallel, by using either direct map or temporal mapping.
For both devices, operate on one page by iteration. Do not return
error if any bytes were moved around, return the (partial) bytes count
to userspace.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Features by CPUID as CPUID.80000008H:EAX[7:0], into variable cpu_maxphyaddr.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.
PR: 193873
Differential Revision: https://reviews.freebsd.org/D904
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by: jhibbits (earlier version)
Sponsored by: EMC / Isilon Storage Division
emulated or when the vcpu incurs an exception. This matches the CPU behavior.
Remove special case code in HLT processing that was clearing the interrupt
shadow. This is now redundant because the interrupt shadow is always cleared
when the vcpu is resumed after an instruction is emulated.
Reported by: David Reed (david.reed@tidalscale.com)
MFC after: 2 weeks
