- Rename from the teardown callback from 'zeroize' to 'cleanup' since
this no longer zeroes keys.
- Change the callback return type to void. Nothing checked the return
value and it was always zero.
- Don't have esp call into ah since it no longer needs to depend on
this to clear the auth key. Instead, both are now private and
self-contained.
Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25443
Examples of depecrated algorithms in manual pages and sample configs
are updated where relevant. I removed the one example of combining
ESP and AH (vs using a cipher and auth in ESP) as RFC 8221 says this
combination is NOT RECOMMENDED.
Specifically, this removes support for the following ciphers:
- des-cbc
- 3des-cbc
- blowfish-cbc
- cast128-cbc
- des-deriv
- des-32iv
- camellia-cbc
This also removes support for the following authentication algorithms:
- hmac-md5
- keyed-md5
- keyed-sha1
- hmac-ripemd160
Reviewed by: cem, gnn (older verisons)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24342
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
SADB_ACQUIRE requests are send by kernel, when security policy doesn't
have corresponding security association for outbound packet. IKE daemon
usually registers its handler for such messages and when the kernel asks
for SA it can handle this request. Now such requests will contain
additional fields that can help IKE daemon to create SA. And IKE now
can create SAs using only information from SADB_ACQUIRE request, this
is useful when many if_ipsec(4) interfaces are in use and IKE doesn track
security policies that was installed by kernel.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
Do not call crypto_newsession() while holding xforms_lock mutex.
Release mutex before invoking crypto_newsession(), and use
ipsec_kmod_enter()/ipsec_kmod_exit() functions to protect from doing
access to unloaded kernel module memory.
Move xform-releated functions into subr_ipsec.c to be able use
ipsec_kmod_* functions. Also unconditionally build ipsec_kmod_*
functions, since now they are always used by IPSec code.
Add xf_cntr field to struct xformsw, it is used by ipsec_kmod_*
functions. Also constify xf_name field, since it is not expected to be
modified.
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17302
Per-cpu zone allocations are very rarely done compared to regular zones.
The intent is to avoid pessimizing the latter case with per-cpu specific
code.
In particular contrary to the claim in r334824, M_ZERO is sometimes being
used for such zones. But the zeroing method is completely different and
braching on it in the fast path for regular zones is a waste of time.
When large SPDs are used, we face two problems:
- too many CPU cycles are spent during the linear searches in the SPD
for each packet
- too much contention on multi socket systems, since we use a single
shared lock.
Main changes:
- added the sysctl tree 'net.key.spdcache' to control the SPD cache
(disabled by default).
- cache the sp indexes that are used to perform SP lookups.
- use a range of dedicated mutexes to protect the cache lines.
Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D15050
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
SPDB was cleaned using TAILQ_CONCAT() instead of calling key_unlink()
for each SP, thus we need to properly clean lists in each bucket of
V_sphashtbl to avoid panic in hashdestroy() when INVARIANTS is enabled.
Do the same for V_acqaddrhashtbl and V_acqseqhashtbl.
When we are called in DEFAULT_VNET, destroy also all global locks and
drain key_timer callout.
Reported by: kp
Tested by: kp
MFC after: 1 week
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The HMAC construction natively permits any key size between 0 and the input
block length. Before r324017, the auth_hash 'keysize' member was the hash
output length, which was used by ipsec for key sizes. (Non-ipsec consumers
need the ability to use other keysizes, hence, r324017.)
The ipsec SADB code blindly uses the auth_hash 'keysize' member for both
minimum and maximum key size, which is wrong (from an HMAC perspective).
For now, just switch it to 'hashsize', which matches the existing
expectations.
Instead it should probably use the range [0, keysize]. But there may be
other broken code in ipsec that rejects hashes with too small a minimum
key size.
Reported by: olivier@
Reviewed by: olivier, no objection from ae
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12770
key_updateaddresses() is used to update SA addresses and NAT-T
configuration in SADB_UPDATE message. This is done using cloning SA
content from old SA into new one. But addresses and NAT-T configuration
are taking from SADB_UPDATE message. Use newsa pointer to set NAT-T
properties into cloned SA.
PR: 223382
MFC after: 1 week
key_msg2sp() is used for parsing data from setsockopt(IP[V6]_IPSEC_POLICY)
call. This socket option is usually used to configure IPsec bypass for
socket. Only privileged user can set this socket option.
The message syntax is described here
http://www.kame.net/newsletter/20021210/
and our libipsec is usually used to create the correct request.
Add additional checks:
* that sadb_x_ipsecrequest_len is not out of bounds of user supplied buffer
* that src/dst's sa_len is the same
* that 2*sa_len is not out of bounds of user supplied buffer
* that 2*sa_len fits into bounds of sadb_x_ipsecrequest
Reported by: Ilja van Sprundel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11796
destination addresses. Previous code has used only destination address
for lookup. But for inbound packets the source address was used as SA
destination address. Thus only outbound SA were used for both directions.
Now we use addresses from a packet as is, thus SAs for both directions are
needed.
Reported by: Mike Tancsa
MFC after: 1 week
Currently are defined three scopes: global, ifnet, and pcb.
Generic security policies that IKE daemon can add via PF_KEY interface
or an administrator creates with setkey(8) utility have GLOBAL scope.
Such policies can be applied by the kernel to outgoing packets and checked
agains inbound packets after IPsec processing.
Security policies created by if_ipsec(4) interfaces have IFNET scope.
Such policies are applied to packets that are passed through if_ipsec(4)
interface.
And security policies created by application using setsockopt()
IP_IPSEC_POLICY option have PCB scope. Such policies are applied to
packets related to specific socket. Currently there is no way to list
PCB policies via setkey(8) utility.
Modify setkey(8) and libipsec(3) to be able distinguish the scope of
security policies in the `setkey -DP` listing. Add two optional flags:
'-t' to list only policies related to virtual *tunneling* interfaces,
i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL
scope. By default policies from all scopes are listed.
To implement this PF_KEY's sadb_x_policy structure was modified.
sadb_x_policy_reserved field is used to pass the policy scope from the
kernel to userland. SADB_SPDDUMP message extended to support filtering
by scope: sadb_msg_satype field is used to specify bit mask of requested
scopes.
For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy
is used to pass if_ipsec's interface if_index to the userland. For GLOBAL
policies sadb_x_policy_priority is used only to manage order of security
policies in the SPDB. For IFNET policies it is not used, so it can be used
to keep if_index.
After this change the output of `setkey -DP` now looks like:
# setkey -DPt
0.0.0.0/0[any] 0.0.0.0/0[any] any
in ipsec
esp/tunnel/87.250.242.144-87.250.242.145/unique:145
spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0
refcnt=1
# setkey -DPg
::/0 ::/0 icmp6 135,0
out none
spid=5 seq=1 pid=872 scope=global
refcnt=1
No objection from: #network
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9805
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
Since the previous algorithm, based on bit shifting, does not scale
with large replay windows, the algorithm used here is based on
RFC 6479: IPsec Anti-Replay Algorithm without Bit Shifting.
The replay window will be fast to be updated, but will cost as many bits
in RAM as its size.
The previous implementation did not provide a lock on the replay window,
which may lead to replay issues.
Reviewed by: ae
Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8468
Coverity points out that 'continue' is equivalent to 'break' in a do {}
while(false) loop.
Reported by: Coverity
CID: 1354983
Sponsored by: EMC / Isilon Storage Division
RFC3173 says that the IP datagram MUST be sent in the original
non-compressed form, when the total size of a compressed payload
and the IPComp header is not smaller than the size of the original
payload. In tunnel mode for small packets IPComp will send
encapsulated IP datagrams without IPComp header.
Add ip_encap handler for IPPROTO_IPV4 and IPPROTO_IPV6 to handle
these datagrams. The handler does lookup for SA related to IPComp
protocol and given from mbuf source and destination addresses as
tunnel endpoints. It decapsulates packets only when corresponding SA
is found.
Reported by: gnn
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D6062
Set zero ivsize for enc_xform_null and remove special handling from
xform_esp.c.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D1503
defines the keys differently than NIST does, so we have to muck with
key lengths and nonce/IVs to be standard compliant...
Remove the iv from secasvar as it was unused...
Add a counter protected by a mutex to ensure that the counter for GCM
and ICM will never be repeated.. This is a requirement for security..
I would use atomics, but we don't have a 64bit one on all platforms..
Fix a bug where IPsec was depending upon the OCF to ensure that the
blocksize was always at least 4 bytes to maintain alignment... Move
this logic into IPsec so changes to OCF won't break IPsec...
In one place, espx was always non-NULL, so don't test that it's
non-NULL before doing work..
minor style cleanups...
drop setting key and klen as they were not used...
Enforce that OCF won't pass invalid key lengths to AES that would
panic the machine...
This was has been tested by others too... I tested this against
NetBSD 6.1.5 using mini-test suite in
https://github.com/jmgurney/ipseccfgs and the only things that don't
pass are keyed md5 and sha1, and 3des-deriv (setkey syntax error),
all other modes listed in setkey's man page... The nice thing is
that NetBSD uses setkey, so same config files were used on both...
Reviewed by: gnn
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
extension header type. The key_flush_sad() now will send SADB_EXPIRE
message when HARD lifetime expires. This is required by RFC 2367 and some
keying daemons rely on these messages. HARD lifetime messages have
precedence over SOFT lifetime messages, so now they will be checked first.
Also now SADB_EXPIRE messages will be send even the SA has not been used,
because keying daemons might want to rekey such SA.
PR: 200282, 200283
Submitted by: Tobias Brunner <tobias at strongswan dot org>
MFC after: 2 weeks
* in ipsec_encap() embed scope zone ids into link-local addresses
in the new IPv6 header, this helps ip6_output() disambiguate the
scope;
* teach key_ismyaddr6() use in6_localip(). in6_localip() is less
strict than key_sockaddrcmp(). It doesn't compare all fileds of
struct sockaddr_in6, but it is faster and it should be safe,
because all SA's data was checked for correctness. Also, since
IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in
kernel-internal form, we need to embed scope zone id from SA into
the address before calling in6_localip.
* in ipsec_common_input() take scope zone id embedded in the address
and use it to initialize sin6_scope_id, then use this sockaddr
structure to lookup SA, because we keep addresses in the SADB without
embedded scope zone id.
Differential Revision: https://reviews.freebsd.org/D2304
Reviewed by: gnn
Sponsored by: Yandex LLC
code.
Resurrect the state field in the struct secpolicy, it has
IPSEC_SPSTATE_ALIVE value when security policy linked in the chain,
and IPSEC_SPSTATE_DEAD value in all other cases. This field protects
from trying to unlink one security policy several times from the different
threads.
Take additional reference in the key_flush_spd() to be sure that policy
won't be freed from the different thread while we are sending SPDEXPIRE message.
Add KEY_FREESP() call to the key_unlink() to release additional reference
that we take when use key_getsp*() functions.
Differential Revision: https://reviews.freebsd.org/D1914
Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu>
Reviewed by: hrs
Sponsored by: Yandex LLC
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself. Update all callers to use the return value.
With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.
NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices. Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.
Differential Revision: https://reviews.freebsd.org/D1440
Reviewed by: adrian, bz, gnn
Sponsored by: EMC / Isilon Storage Division
IPv6. Initialize it only once in def_policy_init(). Remove its
initialization from key_init() and make it static.
Remove several fields from struct secpolicy:
* lock - it isn't so useful having mutex in the structure, but the only
thing we do with it is initialization and destroying.
* state - it has only two values - DEAD and ALIVE. Instead of take a lock
and change the state to DEAD, then take lock again in GC function and
delete policy from the chain - keep in the chain only ALIVE policies.
* scangen - it was used in GC function to protect from sending several
SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries
in the chain and there is no need to have scangen variable.
Use TAILQ to implement SPD entries chain. Use rmlock to protect access
to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK
when we are inserting (or removing) SP entry in the chain.
Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9)
API to implement refcounting in SPD. Merge code from key_delsp() and
_key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases
when we want to release reference or just delete SP entry.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
