This removes the getuid check for delay==0. It didn't prevent users from
writing similar programs in the general case. In theory, if top(1) is
among one of the few restricted programs you're allowed to run, it may
have helped a little, but there are better ways of handling that case.
I had changed this from a for loop to a memset during an earlier
cleanup. This change was incorrect so revert it.
While here, clean up
Reported by: flo
original commit log by miller@OpenBSD r1.46:
Fix exit value when diffing directories with missing files and the -N
or -P options are not used. From Ibrahim Khalifa
Again motivated by upcoming work to rewrite a bunch of this- single-letter
variable names and slightly misleading variable names ("lastmatches" to
indicate that the last matched) are not helpful.
- By popular demand, implement a different switch ("T") for toggling
between thread id and process id.
- Add an assert that the size of command chars is as expected.
- Also clean up some messiness I found when implementing this.
- Further document the new flag.
Requested by: flo, ronald-lists@klop.ws, bapt
PR: 139389 (for the record)
X-MFC-With: r334474
(or peel off the band-aid, whatever floats your boat)
This addresses two separate issues:
1.) Nothing within bsdgrep actually knew whether it cared about line numbers
or not.
2.) The file layer knew nothing about the context in which it was being
called.
#1 is only important when we're *not* processing line-by-line. #2 is
debatably a good idea; the parsing context is only handy because that's
where we store current offset information and, as of this commit, whether or
not it needs to be line-aware.
Admittedly, this is a clang-scan complaint... but it wasn't wrong. fts_flags
is initialized by all cases in the switch(), which should be fairly obvious.
Annotate this anyways.
Neither procfile nor grep_tree return anything meaningful to their callers.
None of the callers actually care about how many lines were matched in all
of the files they processed; it's all about "did anything match?"
This is generally just a light refactoring to remind me of what actually
matters as I'm rewriting these bits to care less about 'stuff'.
GNU grep as in actually in base does not have any translations support
compiled in, so no functionnality loss.
We do support 193 locales in base, we will never catch up on that number of
translation with bsd grep.
Removing NLS support make bsd grep consistent with the other binaries in base
which are not translated, and also reduce a little bit the code.
Reviewed by: kevans
Approved by: kevans
Discussed with: kevans @BSDCan
Differential Revision: https://reviews.freebsd.org/D15682
There exist multi-platform programs that check indent's version in order to
know what they can expect from it. GNU indent provides that via --version,
so implement the same option here.
- Change headers to more closely match what we use
- use more standard functions instead of bzero, bcmp, bcopy
- Add myself to authors.
Tested with: base clang (amd64), gcc 9 (amd64), base clang (i386), base
gcc (mips)
- avoid the need to call a function to get size of known array. I'll
likely re-arrange some of the indirect in a later to avoid the magic
constants.
- use correct type
- add const
- replace caddr_t with void*. This corrects an alignment warning.
- remove duplicated include from immediately prior commit
Under base clang we're now down to:
- 3 warning in top.c, 1 warning in mahcine.c, 4 warning in display.c,
- 1 warning in utils.c
Tested with base clang, gcc7, gcc9, base gcc (mips)
- Add const where helpful
- add missing 'static' for file-local functions
- use nitems where possible
- convert manual abort() to assert
- use strndup instead of homegrown version
Tested with clang, gcc7, and gcc9
With -lpl, code surrounded by parentheses in continuation lines is lined up
even if it would extend past the right margin.
With -nlpl (the default), such a line that would extend past the right
margin is moved left to keep it within the margin, if that does not require
placing it to the left of the prevailing indentation level.
These switches have no effect if -nlp is selected.
Submitted by: Tom Lane
With -lp, if a line has an opening paren which is not closed on that line,
then continuation lines will be lined up to start at the character position
just after the opening paren.
Submitted by: Tom Lane
Rewrite the macros so that they take a parameter. Consumers use it to signal
how much room in the buffer they need; this lets them do that once when
required space is known instead of doing the check once every loop step.
Also take the parameter value into consideration when resizing the buffer;
the requested space may be larger than the constant 400 bytes that the
previous version used - now it's the sum of those two values.
On the consumer side, don't copy strings byte by byte - use memcpy().
Deduplicate code that copied base 2, base 8 and base 16 literals.
Don't advance the e_token pointer once the token has been copied into
s_token. This allows easy calculation of the token's length.
The troff output in indent was invented at Sun and the online documentation
for some post-SunOS operating system includes this:
The usual way to get a troffed listing is with the command
indent -troff program.c | troff -mindent
The indent manual page in FreeBSD 1.0 already lacks that information and
troff -mindent complains about not being able to find the macro file.
It seems that the file did exist on SunOS and was supposed to be imported
into 4.3BSD together with the feature, but that has never happened.
Removal of troff output support simplifies a lot of indent's code.
vgrind(1) seems to be a promising replacement.
It was a shorthand for checking if ps.procname is a non-empty string; the
same can be done with ps.procname[0] which avoids the need for updating
is_procname after every call to lexi().
The trick is to copy everything from the start of the line into the buffer
that stores newlines and comments until indent finds a brace or an else.
pr_comment() will use that information to calculate the original indentation
of the boxed comment.
This requires storing two pieces of information: the real start of the
buffer (sc_buf) and the start of the comment (save_com).
lexi() reads the input stream and categorizes the next token. indent will
sometimes buffer up a sequence of tokens in order rearrange them. That is
needed for properly cuddling else or placing braces correctly according to
the chosen style (KNF vs Allman) when comments are around. The loop that
buffers tokens up uses lexi() to decide if it's time to stop buffering. Then
the temporary buffer is used to feed lexi() the same tokens again, this time
for normal processing.
The problem is that lexi() apart from recognizing the token, can change
a lot of information about the current state, for example ps.last_nl,
ps.keyword, buf_ptr. It also abandons leading whitespace, which is needed
mainly for comment-related considerations. So the call to lexi() while
tokens are buffered up and categorized can change the state before they're
read again for normal processing which may easily result in changing
interpretation of the current state and lead to incorrect output.
To work around the problems:
1) copy the whitespace into the save_com buffer so that it will be read
again when processed
2) trick lexi() into modifying a temporary copy of the parser state instead
of the original.
"while (...)" and "else" or "{"
* Don't flush newlines - there can be multiple of them and they can happen
before a token that isn't else or {. Instead, always store them in save_com.
* Don't dump the buffer's contents on newline assuming that there is only
one comment before else or {.
* Avoid producing surplus newlines, especially before else when -ce is on.
* When -bl is on, don't treat { as a comment (was implemented by falling
through "case lbrace:" to "case comment:").
This commit fixes the above, but exposes another bug and thus breaks several
other tests. Another commit will make them pass again.
In fixing issues with uid > INT_MAX, I broke the uid without username
case. The latter is more important so return the old state.
Discussed with: allanjude
One of the downsides of using numeric WARNS is that if we only have a
single type of issue we get no protection from other changes. For
example, we got no warning for missing variable declaration, due to
the issues with "const".
For this utility, explicitly list out the warnings which are failing.
They should still be fixed, so only reduce them to warning instead of
error.
Tested with: clang base (amd64, i386), gcc6, gcc7, gcc9, gcc base (mips)
- use bool instead of int [0]
- use calloc correctly [0]
(this also caught an incorrect sizeof argument) [1]
- use size_t over int [2]
- correct style
Reported by: pfg [0], scan-build [1], gcc [2]
- Prefer calloc over malloc. This is more predicable and we're not in a
performance sensitive context. [1]
- Remove bogus comment (obsolete from prior commit). [2]
- Remove void casts and type casts of NULL
- Remove redundant declaration of 'quit'
- Add additional const
Reported by: kib [1], vangyzen [2]
Summary: Included VSX registers in powerpc core dumps (both kernel and gcore)
Submitted by: Luis Pires
Differential Revision: https://reviews.freebsd.org/D15512
Allow to show only a single process specified by PID. This could
be done either by running top like 'top -p PID' or using the 'p' command
inside top.
Reviewed by: eadler
Approved by: eadler
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D15501
- Prefer using ansi prototypes rather than C prototypes
- Keep type on separate line from name of function
- Try to keep things const where possible. This will help get to WARNS=6
- switch to "bool" where it makes sense
My previous indent(1) commit accidentally broke the -pcs option (which adds
space between function name and opening parenthesis in function calls) by
copying all but one of a few conditions in an if clause. Reinstate the
condition.
Add a regression test to lower the chances of breaking it again.
Correct a comment with description of what the option does.
If the current token is an opening parenthesis, it's either a function call
(or sizeof or offsetof) or a declaration. The former doesn't need a space
before the parenthesis.
Some users prefer seeing the TID when viewing individual threads. This
makes sense as the PID will be the same for multiple entries. An attempt
was made to include both, but there is insufficient room. As such, using
the TID.
While here, rename the header variables to be more understandable.
Discussed with: mmacy
Reported on: 2009-10-07
r232832 changed the ABI tag note name from .note.ABI-tag to .note.tag.
Follow suit in elfdump.
Elfdump's note parsing is very basic and should be significantly
reworked, but for now just restore the broken functionality.
PR: 228290
Submitted by: martin at lispworks.com
MFC after: 1 week
This one call to getaddrinfo() did not adhere to the common idiom
of storing the result into a second res0 variable, which is later freed.
Reported by: Coverity
CID: 1368069 1368071
Sponsored by: Dell EMC
It is possible to trigger an out of boundary write in cut if an invalid
range with autostart has been supplied.
PR: 227330
Submitted by: tobias@stoeckmann.org
using the appropriate (unsigned) format specification. This prevents
integer overflow when ULLONG_MAX and (on some architectures) ULONG_MAX
are used to initialize an intmax_t and then displayed as the signed
value -1. (A different approach was suggested in the bug report,
which I did not use.) If other limits are defined to be unsigned,
they could be moved here.
PR: 164049
Reported by: Marcus Reid
- Add xo_format_is_numeric() with improved logic to decide if format
strings are numeric, so json output quotes them
- Convert docs to sphinx/rst
- update tests
Includes fix for PR 221676:
27d3021cc3 (diff-5a0d468963477f7daedb8308c219dd80)
PR: 221676
MFC after: 5 days
When large SPDs are used, we face two problems:
- too many CPU cycles are spent during the linear searches in the SPD
for each packet
- too much contention on multi socket systems, since we use a single
shared lock.
Main changes:
- added the sysctl tree 'net.key.spdcache' to control the SPD cache
(disabled by default).
- cache the sp indexes that are used to perform SP lookups.
- use a range of dedicated mutexes to protect the cache lines.
Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D15050
This corrects a warning issues by gcc9:
/srv/src/freebsd/head/usr.bin/top/machine.c:988:22: warning: '%5zu'
directive writing between 5 and 20 bytes into a
region of size 15 [-Wformat-overflow=]
sprintf(status, "?%5zu", state);
Remove 'top.local.hs'. This was not noticed since
/srv/obj/fbsd/srv/src/freebsd/svn/head/amd64.amd64/usr.bin/top/top.local.h
existed locally on my machine despite "make clean". Only fully removing
the objdir allowed me to observe the error directly.
Pointyhat to: me
This leaves at WARNS=6:
35 warnings in top.c
88 warnings in machine.c
all of which are either "incompatible-pointer-types-discards-qualifiers"
or "cast-qual"
- Replace caddr_t with "void *". This reduces
the number of warnings at WARNS=6
- use "static" where possible
- sprinkle const where possible
This leaves at WARNS=6:
35 warnings in top.c
88 warnings in machine.c
7 warnings in commands.c
all of which are either "incompatible-pointer-types-discards-qualifiers"
or "cast-qual"
- Replace caddr_t with "void *". This reduces
the number of warnings at WARNS=6
- use "static" where possible
- sprinkle const where possible
This leaves at WARNS=6:
35 warnings in top.c
72 warnings in machine.c
5 warnings in commands.c
all of which are either "incompatible-pointer-types-discards-qualifiers"
or "cast-qual"
This changes previous behavior of calculating it at startup based on
the current max username length.
This is done because:
- it is in theory possible for the max length to change at run-time
(e.g., a new user is added after top starts running)
- on machines with many users this delays startup significantly
PR: 20799
PR: 89762
Reported by: ob@e-Gitt.NET
Reported by: wkwu@Kavalan.csie.NCTU.edu.tw
Reported on: 2000-08-23 and 2005-11-30
This is all warnings at level six (6) that are not
char-subscripts, incompatible-pointer-types,
sign-compare, switch, int-conversion,
missing-variable-declarations, cast-qual, cast-align
Some warnings that are fixed by this commit are:
shadow, strict-prototypes, missing-prototypes, pointer-arith,
unused-parameter, unused-const-variable, and several others
We've been maintaining top(1) for a long time, and the upstream
hasn't existed/been used in similarly as long. Make it clear that we own
top(1)
Tested with 'make universe'. Everything passed except MIPS which failed
for unrelated reasons. Install also tested for amd64.
Reviewed by: sbruno
No objections: imp, mmacy
Differential Revision: https://reviews.freebsd.org/D15387
- remove "all rights reserved" from my copyright on my extensive
contributions
- belatedly add my name to tuning.7 which I was a large contributor to
several years ago
This commit can also serve as implicit permission for any formatting or
non-substantive changes that FreeBSD wishes to make in the future.
Julian calendar in Bulgaria was 31.03.1916.
Submitted by: Konstantin Terziev
Pull Request: https://github.com/freebsd/freebsd/pull/142
(I independently confirmed the date and this was the right date to use for ncal)
While <sys/sysctl.h> includes <sys/queue.h> unconditionally, it is only
actually used in code which is conditional on _KERNEL. Make the #include
itself conditional as well, and fix userland code that uses <sys/queue.h>
for other purposes but relied on <sys/sysctl.h> to bring it in.
MFC after: 1 week
- the port was removed 2017-06-07 in r442847
- gnupg1 is the older version of gpg with legacy PGP support
- remove unused macro
- remove now-false statement about export restrictions
A version of this patch was originally sent to me by se@, matching behavior
from newer versions of GNU grep.
While there have been some differences of opinion on whether stdin should be
closed or not after depleting it in process of -f, I've opted to leave stdin
open and just let the later matching stuff fail and result in a no-match.
I'm not married to the current behavior- it was generally chosen since we
are adopting this in particular from GNU grep, and I would like to stay
consistent without a strong argument to the contrary. The current behavior
isn't technically wrong, it's just fairly unfriendly to the developer-user
of grep that may not realize their usage is trivially invalid.
Submitted by: se
The monotonic clock is more appropriate than the realtime clock for
measuring durations.
Reviewed by: ken, jilles
Differential Revision: https://reviews.freebsd.org/D14032
It was an old TRE that had plenty of bugs and no performance gain over
regex(3). I disabled it by default in r323615, and there was some confusion
about what the knob does- likely due to poor naming on my part- to the tune
of "well, it sounds like it should speed things up" (mentioned by multiple
people).
To compound this, I have no intention of maintaining a second regex
implementation. If someone would like to step up and volunteer to maintain a
lean-and-mean implementation for grep, this is OK, but we have very few
volunteers to maintain even our primary regex implementation.
This is better behavior than just silently doing the wrong thing. We do not
currently have plans to support -r/-R with the compression-enabled greps.
Reported by: jilles
These match GNU cmp(1) for compatibility where applicable.
Future work might implement the -i option from GNU cmp(1) to express skip
either in terms of both files or of the form "SKIP1:SKIP2" rather than
specifying them as additional arguments to cmp(1).
MFC after: 1 month
* Use slightly more efficient method to determine the name of the program
called [1]
* Use nicer form to loop over arguments [1]
* add special support for --version along with -V previously added by kevans
Reported by: jilles@ [1]
- The --exclude{,-dir} and --include{,-dir} directives now match GNU
behavior of being processed in order and latest matching directive wins
- --label was previously not really documented, and -L and -l did not
indicate that --label applied to them
- The flags listed as being extensions to POSIX spec were not updated with
the removal of compression-related flags
MFC after: 1 week
Compression was removed so #2 goes away and everything else needs renumbered
to match, and the usage string was also updated due to removed options.
X-MFC-With: r332995
Compression support is now handled by an external script, remove it from the
bsdgrep(1) utility.
This removes the support for -Z -J -X and -M
Note: that it matches the changes in newer GNU grep
Reviewed by: kevans
Approved by: kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15197
Import the wrapper script from zstdgrep (written by wiz@netbsd.org)
Modify it to support more than just zstd (adding support for gzip,
lzma, xz and bzip2)
Write a simple manpage dedicated for it.
Only use that new wrapper both for gnu grep and bsd grep
Next step will be removing code related to compression format from bsdgrep
Reviewed by: kevans
Approved by: kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15193
It is acceptable for syscallabi to map SV_ABI to SYSDECODE_ABI on all
architectures; libsysdecode will return not-found sentinel values if
it does not have a syscall name or errno mapping for a given
architecture.
Also, use __LP64__ for the SV_ILP32 -> SYSDECODE_ABI_LINUX32 mapping,
for any future 32- on 64-bit linuxulator implementation.
Reviewed by: jhb
Sponsored by: Turing Robotic Industries Inc.
I have changed my given name from Bruce to Rebecca, and my FreeBSD account
from brucec to bcran.
Update committers-src.dot and calendar.freebsd to show these changes.
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D15125
Prior to r332851:
* --exclude always win out over --include
* --exclude-dir always wins out over --include-dir
r332851 broke that behavior, resulting in:
* First of --exclude, --include wins
* First of --exclude-dir, --include-dir wins
As it turns out, both behaviors are wrong by modern grep standards- the
latest rule wins. e.g.:
`grep --exclude foo --include foo 'thing' foo`
foo is included
`grep --include foo --exclude foo 'thing' foo`
foo is excluded
As tested with GNU grep 3.1.
This commit makes bsdgrep follow this behavior.
Reported by: se
There's no point checking for a bunch of file modes if we're not a
practicing believer of DIR_SKIP or DEV_SKIP.
This also reduces some style violations that were particularly ugly looking
when browsing through.
Split the matching and non-matching cases out into their own functions to
reduce future complexity. As the name implies, procmatches will eventually
process more than one match itself in the future.
The pwd.db and spwd.db files store the change and expire dates as
unsigned 32-bit ints, which overflow in 2106. Reject larger values for
now, until the introduction of a v5 password database.
i386 has 32-bit time_t and so dates beyond y2038 are already rejected by
mktime.
PR: 227589
Reviewed by: lidl
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
For very large quotas, do the multiplication as a 64 bit value to avoid
overflow.
For very small block sizes (smaller than DEV_BSIZE), multiple first
before dividing by block size to avoid underflow.
PR: 227496
Submitted by: Per Andersson <pa AT chalmers.se>
Sponsored by: Dell EMC Isilon
- Move all of the code responsible for transmitting log messages into a
separate function, fprintlog_write().
- Instead of manually modifying a list of iovecs, add a structure
iovlist with some helper functions.
- Alter the F_FORW (UDP message forwarding) case to also use iovecs like
the other cases. Use sendmsg() instead of sendto().
- In the case of F_FORW, truncate the message to a size dependent on the
address family (AF_INET, AF_INET6), as proposed by RFC 5426.
- Move all traditional message formatting into fprintlog_bsd(). Get rid
of some of the string copying and snprintf()'ing. Simply emit more
iovecs to get the job done.
- Increase ttymsg()'s limit of 7 iovecs to 32. Add a definition for this
limit, so it can be reused by iovlist.
- Add fprintlog_rfc5424() to emit RFC 5424 formatted log entries.
- Add a "-O" command line option to enable RFC 5424 formatting. It would
have been nicer if we supported "-o rfc5424", just like on NetBSD.
Unfortunately, the "-o" flag is already used for a different purpose
on FreeBSD.
- Don't truncate hostnames in the RFC 5424 case, as suggested by that
specific RFC.
For people interested in using this, this feature can be enabled by
adding the following line to /etc/rc.conf:
syslogd_flags="-s -O rfc5424"
Differential Revision: https://reviews.freebsd.org/D15011
Highlights:
- Passing "-" to -o will now cause output to go to stdout
- Path-based syntactic sugar for overlays is now accepted. This looks like:
/dts-v1/;
/plugin/;
&{/soc} {
sid: eeprom@1c14000 {
compatible = "allwinner,sun8i-h3-sid";
reg = <0x1c14000 0x400>;
status = "okay";
};
};
MFC after: 3 days
When we had both groff and mandoc in base, we decided to keep the roff(7)
manpage from groff. when remoing groff, we forgot to install the mandoc version
instead.
This fixes it.
Reported by: trasz
MFC after: 1 week
To create hybrid boot media we want to specify a partition at a known location.
This extends the syntax of size partitions to include an optional offset that
can be absolute or relative. It also introduces validation to make sure that
this hasn't resulted in overlapping partitions. I haven't added this to the
file and process partition specifications yet but the mechanics are designed
such that if someone comes up with a good way of specifying the offset it
will be fairly easy to add in.
Reviewed by: imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14916
Provide long options --bytes and --lines to match -c and -n respectively.
This improves head(1)'s compatibility with its GNU counterpart in a sensible
way.
Reviewed by: eadler (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D14139
Add --blocks, --bytes, and --lines long options for -b, -c, and -n
respectively. This improves tail(1)'s compatibility with its GNU counterpart
in a straightforward way.
Reviewed by: eadler (earlier version)
MFC after: 3 days
This can be used to check existing images but will be used in the future to
find EFI ESP images placed in El Torito catalogs so they can be used for
hybrid boot purposes.
Reviewed by: imp (code), sbruno (man page), bcr (man page)
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14952
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
Minor rewordings, markup fixes or enhancements, and some typo fixes. Add a few
sentences clarifying the special zero duration.
PR: 227012
Submitted by: Mateusz Piotrowski (0mp@) (earlier version)
List enum values on separate lines to minimize diffs as new types are
added. Split the enum values up into groups and use some simple sorting
within groups (scalar enums are sorted by size, then base, all other
groups are generally sorted alphabetically).
No functional change.
summits at BSDCan and BSDCam in 2017.
The TCP Blackbox Recorder allows you to capture events on a TCP connection
in a ring buffer. It stores metadata with the event. It optionally stores
the TCP header associated with an event (if the event is associated with a
packet) and also optionally stores information on the sockets.
It supports setting a log ID on a TCP connection and using this to correlate
multiple connections that share a common log ID.
You can log connections in different modes. If you are doing a coordinated
test with a particular connection, you may tell the system to put it in
mode 4 (continuous dump). Or, if you just want to monitor for errors, you
can put it in mode 1 (ring buffer) and dump all the ring buffers associated
with the connection ID when we receive an error signal for that connection
ID. You can set a default mode that will be applied to a particular ratio
of incoming connections. You can also manually set a mode using a socket
option.
This commit includes only basic probes. rrs@ has added quite an abundance
of probes in his TCP development work. He plans to commit those soon.
There are user-space programs which we plan to commit as ports. These read
the data from the log device and output pcapng files, and then let you
analyze the data (and metadata) in the pcapng files.
Reviewed by: gnn (previous version)
Obtained from: Netflix, Inc.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11085
The general idea here is to provide userspace programs with well-defined
sources of entropy, in a fashion that doesn't require opening a new file
descriptor (ulimits) or accessing paths (/dev/urandom may be restricted
by chroot or capsicum).
getrandom(2) is the more general API, and comes from the Linux world.
Since our urandom and random devices are identical, the GRND_RANDOM flag
is ignored.
getentropy(3) is added as a compatibility shim for the OpenBSD API.
truss(1) support is included.
Tests for both system calls are provided. Coverage is believed to be at
least as comprehensive as LTP getrandom(2) test coverage. Additionally,
instructions for running the LTP tests directly against FreeBSD are provided
in the "Test Plan" section of the Differential revision linked below. (They
pass, of course.)
PR: 194204
Reported by: David CARLIER <david.carlier AT hardenedbsd.org>
Discussed with: cperciva, delphij, jhb, markj
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D14500
As indicated in Committers guide Chapter 6, point 9
"Optional: Update Ports with Personal Information"
Approved by: tcberner
Differential Revision: https://reviews.freebsd.org/D14653
On an RRQ, tftpd doesn't exit as soon as it's finished receiving a file.
Instead, it waits five seconds just in case the client didn't receive the
server's last ACK and decides to resend the final DATA packet.
Unfortunately, this created a 5 second delay from when the client thinks
it's done sending the file, and when the file is available for other
processes.
Fix this bug by closing the file as soon as receipt is finished.
PR: 157700
Reported by: Barry Mishler <barry_mishler@yahoo.com>
MFC after: 3 weeks
POSIX explicitly states that the application must declare union semun.
This makes no sense, but it is what it is. This brings us into line
with Linux, MacOS/Darwin, and NetBSD.
In a ports exp-run a moderate number of ports fail due to a lack of
approprate autotools-like discovery mechanisms or local patches. A
commit to address them will follow shortly.
PR: 224300, 224443 (exp-run)
Reviewed by: emaste, jhb, kib
Exp-run by: antoine
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14492
The source of error is a rounded increment being too large and thus the loop
steps slightly past 'last'. Perform a final comparison using the formatted
string values (truncated precision) to determine if we still need to print
the 'last' value.
PR: 217149
Submitted by: Fernando Apesteguía <fernando.apesteguia AT gmail.com>,
Yuri Pankov <yuripv AT icloud.com> (earlier version)
Reported by: Martijn Dekker <mcdutchie AT hotmail.com>
Sponsored by: Dell EMC Isilon
With all values identical it was possible for Var() to return a negative
value due to limited floating point precision, resulting in "nan"
reported as Stddev.
Variance cannot actually be negative, so just return 0. We can later
investigate alternate algorithms for calculating variance to reduce the
effect of catastrophic cancellation here.
Reported by: Arshan Khanifar <arshankhanifar_gmail.com>
Approved by: phk
Sponsored by: The FreeBSD Foundation
A subtle logic bug, probably introduced in r311895, caused tail to print the
first two lines of piped input in forward order, if the very first character
was a newline.
PR: 222671
Reported by: Jim Long <freebsd-bugzilla@umpquanet.com>, pprocacci@gmail.com
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
because the whole idea of this utility is rather broken.)
This originally come from NetBSD, and was later reworked a bit.
Reviewed by: des@ (earlier version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4981
Summary:
r329077 caused gcc to emit uninitialized use warnings. Attempting to
fix those warnings yielded the following warnings:
usr.bin/tftp/main.c: In function 'main':
usr.bin/tftp/main.c:181: warning: variable 'el' might be clobbered by
'longjmp' or 'vfork'
usr.bin/tftp/main.c:182: warning: variable 'hist' might be clobbered by
'longjmp' or 'vfork'
This is a known bug in gcc, found at
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=24239
Work around that by simply marking hist and el as static.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14302
Introduce WITH_/WITHOUT_LLVM_COV to match GCC's WITH_/WITHOUT_GCOV.
It is intended to provide a superset of the interface and functionality
of gcov.
It is enabled by default when building Clang, similarly to gcov and GCC.
This change moves one file in libllvm to be compiled unconditionally.
Previously it was included only when WITH_CLANG_EXTRAS was set, but the
complexity of a new special case for (CLANG_EXTRAS | LLVM_COV) is not
worth avoiding a tiny increase in build time.
Reviewed by: dim, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D142645
This bug was first reported 14 years ago. The problem was understood 8.5
years ago. A patch that is functionally identical to this one was proposed
almost 8 years ago and languished in the PR system / Bugzilla.
PR: 63197
Submitted by: lxv AT omut.org, fernando.apesteguia AT gmail.com
Reported by: freebsd AT nbritton.org
If the interrupt count is very high (greater than ~42M), notably on one-shot
execution on long running systems, the intermediate multiplication step in the
rate calculation will overflow the width of a 32-bit architecture long (32
bits), causing the rest of the calculation to calculate with a truncated value,
and report very low rates (sometimes 0).
MFC after: 2 weeks
When building FreeBSD the makefiles invoke find with various flags such as
`-s` that aren't supported in the native /usr/bin/find. To fix this I
build the FreeBSD version of find and use that when crossbuilding.
Inserting lots if #ifdefs in the code is rather ugly but I don't see a
better solution.
Reviewed By: brooks (mentor)
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13306
Add libxo output support
Merge exp41_intpr and exp_intpr function. The only difference is to print
NFSV4.1 operations in exp41, add a third arguement to control that.
printtitle was set to 1 and don't have a switch, add a -q options to control it.
Reviewed by: bapt
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D14012
Tests were disconnected so that running `make check` in usr.bin/awk did not
have any effect, but CI runs use installed tests. Fully disconnect tests/
from the build for the time being as a short term solutio
Reported by: lwhsu
This is a prerequisite to adding support for the monotonic clock
Reviewed by: ken, imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14030
Restore the original character to print if we used the look-ahead
buffer, but that didn't help -- we either got an illegal sequence
or still can't complete.
PR: 224552
Submitted by: Yuri Pankov
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13963
Highlights of this update:
- /__local_fixups__ is now generated to be GPL dtc and libfdt compliant
- Compiling with -@ will now cause dtc to assign phandles to all labelled
nodes
- /include/ and /incbin/ now handle absolute paths correctly
- The manpage now has information about overlays, including how to apply
them and how to generate them
- Syntactic sugar for overlays is now supported, allowing an overlay DTS
like:
=
/dts-v1/;
/plugin/;
&foo {
foo,status = "okay";
};
=
to generate a fragment targetting <&foo>.
- The process stats are actually thread counts rather than process
counts.
- Simplify various descriptions to remove mention of stats that are
updated every 5 seconds (all VM related stats are now "instant",
only the load average is updated every 5 seconds).
- Don't make any mention of special treatment for processes that have
been active in the last 20 seconds. We don't track that stat.
- Rework the description of active virtual memory. Call it mapped
virtual memory and explicitly point out it is not the same as the
active page queue (which corresponds to "Active" in top(1)), and
also hint at the possible bogusness of the value (e.g. if a process
maps a single page out of a multiple GB file, the entire file's size
is considered mapped).
- Simplify a few descriptions that implied their output was a value
per interval. All of the "rate" values are per-second rates scaled
across the interval.
- Update a few comments for 'struct vmtotal' along similar lines.
Reported by: mwlucas (indirectly)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13905
I need these tools in order to install the crossbuilt FreeBSD and create a
disk image. Linux does not have a st_flags in struct stat so unfortunately
I need a bunch of ugly ifdefs. The resulting binaries allow me to
sucessfully install a MIPS64 world and create a disk-image that boots.
Reviewed By: brooks, bdrewery, emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13307
6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
The NetBSD tests for vmstat are basically just a smoke test, ensuring that
executing `vmstat` and `vmstat -s` exit successfully. This is more than we
test now, so go with it.
Plan A mmap()'s the entire input file and operates on it in memory. The
map(2) call succeeded, so we shouldn't need to bother checking for the NUL
byte as long as we're within our buffer space.
This was clearly intentional to match "the behavior of the original code",
but it creates a discrepancy between Plan A and Plan B that doesn't seem
sensible and it's not inherently wrong to allow a NUL byte.
This change was motivated by the gemspec in net/rubygem-grpc failing to
patch, despite the patch being generated with diff, because a NUL byte was
used as a delimiter in the header briefly in an otherwise text file.
An alternative was considered: to fallback to plan B if plan A won't process
the entire file due to a NUL byte, but I deemed this to be the better option
since plan A isn't failing due to memory limitations and will fail later on
if it's really dealing with a file it shouldn't be.
PR: 224842 (exp-run)
Reported by: swills
Reviewed by: emaste, pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13738
The NetBSD test suite has 24 tests for awk, and we pass exactly 4 of them.
Add the necessary pieces for interested parties to easily connect the
tests and run them, but leave them disconnected for the time being.
Some of these tests outright segfault in our awk, others just exhibit the
wrong behavior.
Upstream lld has no man page. Introduce a basic one for FreeBSD based on
ld.lld --help, with a brief introduction and additional detail for some
options.
We'll continue refining this in FreeBSD, and then submit it upstream once
the first round of edits are complete.
Submitted by: krion, Arshan Khanifar, emaste, bjk
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13813
- Use `-r` for "reverse" mode and to match DragonFlyBSD.
- Move defines around to clear up logic
- use `errx` instead of `fprintf` and `exit`
PR: 35109
Submitted By: philipp.mergenthaler@stud.uni-karlsruhe.de
Submitted on: 2002-02-19
Reviewed by: kevans
Using the -s flag on devices is extraordinarily slow due to using fseek(3) a
little too conservatively. Address this by using fseek on character/block
devices as well, falling back to getchar(3) only if we fail to seek or we're
operating on tape drives, where fseek may succeed while not actually being
supported.
PR: 86485
Submitted by: arundel (originally; modified since then)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10939
By default, or with the -P flag, find(1) should evaluate paths "physically."
For symlinks, this means using the link itself instead of the target.
Historically (since the import of BSD 4.4-lite from CSRG), find(1) has
failed to refer to the link itself, at least for -newer and -samefile.
[0]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/find.html
PR: 222698
Reported by: Harald Schmalzbauer <bugzilla.freebsd AT omnilan.de>
Sponsored by: Dell EMC Isilon
