Change its return type to void, because its result is ignored in both
call sites. Remove oldcnp argument as well, it is NULL always.
Suggested and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33721
Shortlinks occupy the space of both di_db and di_ib when used. However,
everywhere that wants to read or write a shortlink takes a pointer do
di_db and promptly runs off the end of it into di_ib. This is fine on
most architectures, if a little dodgy. However, on CHERI, the compiler
can optionally restrict the bounds on pointers to subobjects to just
that subobject, in order to mitigate intra-object buffer overflows, and
this is enabled in CheriBSD's pure-capability kernels.
Instead, clean this up by inserting a union such that a new di_shortlink
can be added with the right size and element type, avoiding the need to
cast and allowing the use of the DIP macro to access the field. This
also mirrors how the ext2fs code implements extents support, with the
exact same structure other than having a uint32_t i_data[] instead of a
char di_shortlink[].
Reviewed by: mckusick, jhb
Differential Revision: https://reviews.freebsd.org/D33650
LK_EXCLUSIVE must be passed always, some consumers need the ability to
specify LK_NOWAIT
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31464
Apparently some large-file systems out there, such as my powerpc64le
Linux box, define daddr_t as a 32-bit type, which is sad and stymies
cross-building disk images. Cast daddr_t to off_t before doing
arithmetic that overflows.
Reviewed by: arichardson, jrtc27, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27458
By default, makefs(8) has very few spare inodes in its output images,
which is fine for static filesystems, but not so great for VM images
where many more files will be added. Make makefs(8) use the same
default settings as newfs(8) when creating images with free space --
there isn't much point to leaving free space on the image if you
can't put files there. If no free space is requested, use current
behavior of a minimal number of available inodes.
Reviewed by: manu
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29492
An install using -DNO_ROOT emits mtree entries containing tags used by
pkgbase. makefs(8) can safely ignore them, so do that rather than
emitting a warning for each entry.
Reviewed by: brooks, imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29384
The makefs msdosfs code includes fs/msdosfs/denode.h which directly uses
struct buf from <sys/buf.h> rather than the makefs struct m_buf.
To work around this problem provide a local denode.h that includes
ffs/buf.h and defines buf as an alias for m_buf.
Reviewed By: kib, emaste
Differential Revision: https://reviews.freebsd.org/D28835
Make sys/buf.h, sys/pipe.h, sys/fs/devfs/devfs*.h headers usable in
userspace, assuming that the consumer has an idea what it is for.
Unhide more material from sys/mount.h and sys/ufs/ufs/inode.h,
sys/ufs/ufs/ufsmount.h for consumption of userspace tools, with the
same caveat.
Remove unacceptable hack from usr.sbin/makefs which relied on sys/buf.h
being unusable in userspace, where it override struct buf with its own
definition. Instead, provide struct m_buf and struct m_vnode and adapt
code to use local variants.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D28679
The st variable is used as a shortcut for &node->inode->st, but in one
branch just before the exit we update node->inode without changing st.
Reported by: AddressSanitizer
Reviewed By: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28570
The macOS assert.h header does not define static_assert when compiling in
C99 mode. To fix this compile with -std=c11.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25928
The added print was very helpful for debugging failed disk image creation.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D23200
This breaks the build on macOS where this header doesn't exist. I could
also add a compat header to tools/build/cross-build but since it's not
needed removing it seems like the better solution.
In order to do so we need to install the msdosfs headers to the bootstrap
sysroot and avoid includes of kernel headers that may not exist on every
host (e.g. sys/lockmgr.h). This change should allow bootstrapping of makefs
on FreeBSD 11+ as well as Linux and macOS.
We also have to avoid using the IO_SYNC macro since that may not be
available. In makefs it is only used to switch between calling
bwrite() and bdwrite() which both call the same function. Therefore we
can simply always call bwrite().
For our CheriBSD builds we always bootstrap makefs by setting
LOCAL_XTOOL_DIRS='lib/libnetbsd usr.sbin/makefs' and use the makefs binary
from the build tree to create a bootable disk image.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D23201
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Since st_birthtime doesn't exists on Linux (unless you use statx(2)), we
instead populate it with the st_ctime value.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D22386
Setting the B_INVALONERR flag before a synchronous write causes the buf
cache to forcibly invalidate contents if the write fails (BIO_ERROR).
This is intended to be used to allow layers above the buffer cache to make
more informed decisions about when discarding dirty buffers without
successful write is acceptable.
As a proof of concept, use in msdosfs to handle failures to mark the on-disk
'dirty' bit during rw mount or ro->rw update.
Extending this to other filesystems is left as future work.
PR: 210316
Reviewed by: kib (with objections)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21539
After populating the filesystem, write a FSInfo block with
proper information.
Reviewed by: emaste, cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21363
There is no need to duplicate this file when it can be trivially
shared (just exposing sections previously under #ifdef _KERNEL).
MFC with: r351273
Differential Revision: The FreeBSD Foundation
There is no reason to duplicate this file when it can be trivially
shared (just exposing one section previously under #ifdef _KERNEL).
Reviewed by: imp, cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21346
(The kernel uses caddr_t.)
Suggested by: cem
Reviewed by: cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21348
Add FAT support to makefs by copying some files from sys/fs/msdosfs/ and
updating others with changes from NetBSD.
The six files copied from sys/fs/msdosfs at r348251 and modified are:
denode.h direntry.h fat.h msdosfs_fat.c msdosfs_lookup.c msdosfsmount.h
I would prefer to avoid the duplication, but reluctance to doing so was
expressed in a previous review (D11197); for now copy the files and
revisit in the future.
Submitted by: Siva Mahadevan
Discussed with: cem, imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16438
When processing mtree(5) MANIFEST files, makefs(8) previously threw an
error if it encountered an entry whose "time" attribute contained a
non-zero subsecond component (e.g. time=1551620152.987220000).
Update the handling logic to properly assign the subsecond component if
built with nanosecond support, or silently discard it otherwise.
Also, re-enable the time attribute for the kyua tests.
PR: 194703
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Differential Revision: https://reviews.freebsd.org/D19627
to go to the FS image we are making cannot be read (e.g. EPERM).
Current behaviour when we issue waring but still proceeed and
return success is definitely not correct: masking out error
condition as well as making a slighly inconsistent FS where
attempt to access the file in question ends up in EBADF. See
linked DR for details.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18584
Although the ffs (and later msdosfs) implementation in makefs is
independent of the one in kernel, it makes sense to keep differences to
a minimum in order to ease comparison and porting changes across.
Submitted by: Siva Mahadevan
Sponsored by: The FreeBSD Foundation
Fix two failing makefs test cases by adding "-M 1m", which was already used
for every other FFS test case. Add a new test case for the underlying
issue: with no -M, -m, or -s options, makefs can underestimate image size.
PR: 229929
Reported by: Jenkins
MFC after: 2 weeks
- cd9660 relies on an #include "iso.h" but does not build any .c files
out of source, so remove reach-over .PATH
- ffs does not rely on any sys/ headers, so remove -I from CFLAGS.
- ffs_tables from sys/ is used by ffs; move the SRCS entry from the top-
level Makefile to ffs' Makefile.inc.
Sponsored by: The FreeBSD Foundation
When I implemented my EFI support I failed to check if the upstream version
of makefs in NetBSD had done the same. Override my version with theirs to
make it easier to stay in sync with them in the future.
Reviewed by: imp, mav
Obtained from: NetBSD
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14913
r222319 in newfs raised the default blocksize for UFS/FFS filesystems
from 16K to 32K and the default fragment size from 2K to 4K, with a
rationale that most disks were now running with 4K sectors.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
UEFI booting requires an EFI System Partition (ESP). On most storage devices
this will be in a specific partition type. To allow booting from CD/ISO
filesystems, UEFI will look for an ESP in the form of a FAT filesystem image
embedded in the image. Historically FreeBSD has added one of these to its
amd64 ISO images but marked it as simply another i386 boot image. Luckily for
us most UEFI implementations are rather forgiving and work this out for us.
This change adds the ability to mark a boot image as being a UEFI image. It
also modifies our ISO generation to use this marking for the UEFI image we
embed.
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: emaste, imp
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14809
This extends the set in r316028 to allow all tests to pass or be skipped
on a system without cd9660 support.
A better approach using tar is possible, but this works today.
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10516
