Commit Graph

457 Commits

Author SHA1 Message Date
Ruslan Ermilov
155d9f6a98 Kill more references to lnc(4).
Submitted by:	grep(1)
2006-05-16 12:15:39 +00:00
Doug Ambrisko
32397ce071 Add in linsysfs. A linux 2.6 like sys filesystem to pacify the Linux
LSI MegaRAID SAS utility.

Sponsored by:		IronPort Systems
Man page help from:	brueffer
2006-05-09 22:27:01 +00:00
Sam Leffler
57d6ae0689 add ath and wlan crypto support
MFC after:	1 month
2006-05-03 18:15:36 +00:00
Scott Long
27aafcda76 Enable the rr232x driver for amd64. 2006-04-28 05:23:10 +00:00
Xin LI
3b28c0c6f9 Move AHC_REG_PRETTY_PRINT and AHD_REG_PRETTY_PRINT below
their corresponding devices.
2006-04-24 08:44:34 +00:00
Paul Saab
d8636a9ab7 Hook bce up to the build 2006-04-10 20:04:22 +00:00
Maksim Yevmenkin
b643101293 Add kbdmux(4) to GENERIC on amd64
Requested by:	scottl
Tested by:	scottl
2006-03-31 23:04:48 +00:00
Scott Long
7f631a410c Hook the MFI driver up to the build. 2006-03-29 09:57:22 +00:00
David E. O'Brien
f8ed1e340d Move linux support to the linux section. 2006-01-12 01:20:59 +00:00
Poul-Henning Kamp
d3e64681d6 Move the old BSD4.3 tty compatibility from (!BURN_BRIDGES && COMPAT_43)
to COMPAT_43TTY.

Add COMPAT_43TTY to NOTES and */conf/GENERIC

Compile tty_compat.c only under the new option.

Spit out
	#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
2006-01-10 09:19:10 +00:00
Ruslan Ermilov
6646524f34 - Allow duplicate "machine" directives with the same arguments.
- Move existing "machine" directives to DEFAULTS.
2005-11-27 23:17:00 +00:00
Marcel Moolenaar
38195fdcaf Add uart(4). When both sio(4) and uart(4) can handle a serial port,
sio(4) will claim it. This change therefore only affects how ports
are handled when they are not claimed by sio(4), and in principle
will improve hardware support.

MFC after: 2 months
2005-11-05 19:48:53 +00:00
John Baldwin
d394d454b0 Throw the switch and turn on STOP_NMI on in GENERIC for amd64 and i386.
Requested by:	kris
Ok'd by:	scottl
2005-11-01 22:59:03 +00:00
Peter Wemm
54903605b3 MFi386: bring over DEFAULTS (repocopy) and adapt. While there isn't a
4.x->6.x amd64 upgrade path, the config files are kept in approximate sync.
2005-10-27 18:54:43 +00:00
David E. O'Brien
537b6cf3ea Remove atpic as we've changed to using the lapic timer vs. using irq0 2005-10-27 18:40:56 +00:00
Scott Long
dc8540a9a0 Hook up the hptmv driver for amd64.
MFC After: 3 days
2005-09-08 03:29:18 +00:00
Maxime Henrion
5a29706504 Add back ed(4) in amd64 GENERIC. It now works nicely and since those
chips are commonly found, it makes sense to have it in GENERIC.  This
is a candidate for a RELENG_6 MFC.

Approved by;	peter
Requested by:	pav
Tested by:	pav
2005-07-24 17:55:57 +00:00
Ken Smith
22e59cec3b Add recently invented COMPAT_FREEBSD5 option.
MFC after:	3 days
2005-07-14 15:39:06 +00:00
Damien Bergamini
0b090f4153 Add new ral(4) and ural(4) drivers.
Approved by:	silby (mentor)
2005-05-24 16:48:07 +00:00
Peter Wemm
e137a5d63a MFi386: remove NO_MIXED_MODE 2005-04-15 18:45:07 +00:00
Eric Anholt
354096a348 Follow i386's suit and include AGP support in the generic kernel. 2005-04-13 06:00:07 +00:00
David E. O'Brien
503e759c5d MFR5: rev 1.421.2.6: Enable support for 32-bit Linux binaries by default.
There are too many questions in freebsd-amd64@ about how to enable Linux
support that it seems a required piece of functionality.  Thus we should
just have it on by default.
2005-03-31 20:55:10 +00:00
Scott Long
d0885ac3cf Glue the arcmsr driver into the tree. 2005-03-31 20:21:43 +00:00
Maxim Sobolev
6bcf003260 Add USB Communication Device Class Ethernet driver. Originally written for
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.

Obtained from:  http://www.gank.org/freebsd/cdce/
                NetBSD
                OpenBSD
2005-03-22 14:52:40 +00:00
Murray Stokely
991f5121f0 Add a comment to note that pseudo-device bpf is required for DHCP.
This is mentioned in the Handbook but it is not as obvious to new
users why bpf is needed compared to the other largely self-explanatory
items in GENERIC.

PR:		conf/40855
MFC after:	1 week
2005-03-18 15:24:00 +00:00
David E. O'Brien
bf6fabdd60 Make it clear nve needs mii, and shorten long comment line. 2005-03-16 20:23:31 +00:00
Ian Dowse
7fe25a5726 Enable ehci by default on i386 and amd64. It had got to the stage
where having this disabled was actually hurting us, since so many
BIOSes include legacy USB emulation that takes control of all usb
ports and only the ehci driver knows how to disable it.
2005-03-16 02:34:50 +00:00
David E. O'Brien
1b1a07ad8b FreeBSD consumer bits of the nForce MCP NIC binary blob.
Demanded by:	DES
Encouraged by:	scottl
Obtained from:	q@onthenet.com.au (partially)
KNF'ed by:	obrien
2005-03-12 00:29:30 +00:00
Peter Wemm
8a7572e0e7 MFi386: Sync whitespace and an abbreviation 2005-02-28 23:39:58 +00:00
Jun Kuriyama
6f4e528a8e o Use tab instead of spaces for puc(4) line.
o Use capitalized "Ethernet" for consistency.
2005-01-05 05:25:21 +00:00
John Baldwin
118ef86edc Minor sync to i386 GENERIC in the form of comments and whitespace. 2004-12-30 18:51:23 +00:00
Andre Oppermann
32672ba88d Reduce annoying SCSI probing delay from 15 to 5 seconds in all GENRIC kernels.
Discussed on:	-current
2004-11-02 20:57:20 +00:00
Peter Wemm
46ec31b083 MFi386: add ispfw (except using correct device<tab><tab>ispfw format,
<space><tab> is for the options line)
2004-09-22 00:44:13 +00:00
Bill Paul
a07bd003bf Add device driver support for the VIA Networking Technologies
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.

Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
2004-09-10 20:57:46 +00:00
Scott Long
444ba94513 Switch the default scheduler to 4BSD to match what will go into RELENG_5 soon.
It can be switched back once 5.3 is tested and released.  Also turn on
PREEMPTION as many of the stability problems with it have been fixed.

MT5: 3 days.
2004-09-07 22:37:43 +00:00
Andre Oppermann
c21fd23260 Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option.  All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over.  This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
Peter Wemm
deefc3c4f5 Sync with i386 - add ADAPTIVE_GIANT, remove pcic 2004-08-16 22:59:24 +00:00
David E. O'Brien
7a071c6a49 Complete 'IA32' -> 'COMPAT_IA32' change for the Linuxulator32. 2004-08-16 12:51:33 +00:00
Mark Murray
d23a262fc5 Making a loadable null.ko for /dev/(null|zero) proved rather
unpopular, so remove this (mis)feature.

Encouragement provided by:	jhb (and others)
2004-08-03 19:24:54 +00:00
Mark Murray
b6527a3667 Add the I/O device for those architectures that have it. 2004-08-01 19:37:34 +00:00
Mark Murray
8ab2f5ecc5 Break out the MI part of the /dev/[k]mem and /dev/io drivers into
their own directory and module, leaving the MD parts in the MD
area (the MD parts _are_ part of the modules). /dev/mem and /dev/io
are now loadable modules, thus taking us one step further towards
a kernel created entirely out of modules. Of course, there is nothing
preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
Warner Losh
2eed2482ba Remove ahb, aha, ie, le and wl devices. They are all ISA/EISA only.
I went ahead and left in the ISA cards that also have pccard
attachments.  There's no way that these devices could attach.

OK'd by: peter
2004-07-22 22:29:45 +00:00
Scott Long
701f140800 Enable ADAPTIVE_MUTEXES by default by changing the sense of the option to
NO_ADAPTIVE_MUTEXES.  This option has been enabled by default on amd64 for
quite some time, and has been extensively tested on i386 and sparc64.  It
shows measurable performance gains in many circumstances, and few negative
effects.  It would be nice in t he future if adaptive mutexes actually went
to sleep after a certain amount of spinning, but that will require quite a
bit more testing.
2004-07-18 15:59:03 +00:00
Maxim Konovalov
aa355a2679 In -CURRENT pseudo devices are not statically assigned at compile time,
remove a stale comment.

PR:		kern/62285
2004-07-18 09:03:12 +00:00
Paul Saab
a146798856 Fix the build. pcm is no more. 2004-07-16 21:48:30 +00:00
Marcel Moolenaar
8bcb1e9e84 Add options KDB and GDB. KDB takes on the function of what DDB used
to be. Both DDB and GDB specify which KDB backends to include.
2004-07-11 03:20:09 +00:00
David E. O'Brien
2a79761d77 The majority of FreeBSD/amd64 machines are SMP, so use ADAPTIVE_MUTEXES
by default to improve performance.
2004-06-13 23:03:57 +00:00
Peter Wemm
74cfa96999 MFi386: add ixgp device 2004-06-03 21:40:41 +00:00
Peter Wemm
922013a665 Turn on modules for amd64. Fear. 2004-05-17 22:13:14 +00:00
Peter Wemm
2a779082bb MFi386: add rue and twa 2004-05-16 20:57:01 +00:00