the FreeBSD test suite
functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.
A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)
As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
We want to ensure we always use libarchive from ports in the ports tree.
It simplifies ports maintainance and anyway libarchive.pc was not reflecting the
different way libarchive can be built in base
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
header with archive_crypto_private.h, and its ARCHIVE_HASH_xxx macros
were renamed to ARCHIVE_CRYPTO_xxx.
Rename these macros in lib/libarchive/config_freebsd.h, to re-enable the
hashes for libarchive again. This affects the mtree format writer, and
the xar format reader and writer modules.
This also requires changes in the library order for statically linking
rescue, otherwise ld would complain about redefined symbols. Thanks to
jkim for pointing out the solution.
Reviewed by: kientzle
MFC after: 1 week
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
Update libarchive to 3.1.2
Some of new features:
- support for lrzip and grzip compression
- support for writing tar v7 format
- b64encode and uuencode filters
- support for __MACOSX directory in Zip archives
- support for lzop compresion (external utility)
Some of new features:
- New readers: RAR, LHA/LZH, CAB reader, 7-Zip
- New writers: ISO9660, XAR
- Improvements to many formats, especially including ISO9660 and Zip
- Stackable write filters to write, e.g., tar.gz.uu in a single pass
- Exploit seekable input; new "seekable" Zip reader can exploit the Zip
Central Directory when it's available; the old "streamable" Zip reader
is still fully supported for cases where seeking is not possible.
Full release notes available at:
https://github.com/libarchive/libarchive/wiki/ReleaseNotes
3730:
Fix issue 174 (Windows path names, not relevant for FreeBSD)
3734:
Merge r1989: archive_clear_error should set errno to 0.
3735:
Merge r3247 from trunk: Clear errors before returning
from archive_read_support_format_all()
3799:
Check the position before dereferencing the pointer.
This avoids dereferencing one byte past the end of a string
3824:
Merge r3823 from trunk for issue 199 (hang in iso9660 reading)
Obtained from: http://code.google.com/p/libarchive
MFC after: 2 weeks
The following additional vendor revisions are applied:
Revision 3740:
Use archive_clear_error() to clear the error markers.
Obtained from: http://code.google.com/p/libarchive
MFC after: 2 weeks
Fixes extraction of Zip entries that use length-at-end without specifying
either the compressed or uncompressed length. In particular, fixes bsdtar
extraction of such files.
Obtained from: http://code.google.com/p/libarchive
Reported by: Patrick Lamaiziere <patfbsd@davenulle.org> (freebsd-stable@)
MFC after: 1 week
ISO images with tar.
Vendor revision 3648 (merge of 3647):
Additional fix to issue 168 because the change of r3642 was not sufficient.
- Make sure "CL" entry appear after its "RE" entry which the "CL" entry
should be connected with.
- Give consideration to the case that the top level "RE" entry has
already been exposed outside before its tree.
Approved by: re (kib)
Obtained from: libarchive (release/2.8, svn rev 3648)
MFC after: 3 days
Upstream revision 3645 (merge of 3642):
Change the mechanism handling a rr_moved directory,
which is Rockridge extension that can exceed the limitation of
a maximum directory depth of ISO 9660.
- Stop reading all entries at a time.
- Connect "CL" entry to "RE" entry dynamically, which "CL" and "RE"
have information to rebuild a full directory tree.
- Tweak some related tests since we use Headsort for re-ordering
entries and it cannot make a steady order when the keies of
the entries are the same.
http://code.google.com/p/libarchive/issues/detail?id=168
Reviewed by: kientzle
Approved by: re (kib)
Obtained from: libarchive (release/2.8, svn rev 3645)
MFC after: 3 days
Partial merge of 2431 from trunk: Retry writes on EINTR.
This should fix the SIGINT handler in bsdtar.
Note: The rest of r2431 can't be merged, since it interacts
with a big write-side rearchitecture.
PR: bin/149409
Reviewed by: kientzle
Approved by: re (kib)
MFC after: 3 days
violated ECMA-119 (ISO9660): allow reserved4 to be 0x20 in PVD.
This allows tar to read FreeBSD distribution ISO images created
with makefs prior to NetBSD bin/45217 bugfix (up to 9.0-BETA1).
In addition, merge following important bugfixes from
libarchive's release/2.8 branch:
Revision 2812:
Merge 2811 from trunk: Don't try to verify that compression-level=0
produces larger results than the default compression, since this isn't
true for all versions of liblzma.
Revision 2817:
Merge 2814 from trunk: Fix Issue 121 (mtree parser error)
http://code.google.com/p/libarchive/issues/detail?id=121
Revision 2820:
Fix issue 119.
Change the file location check that a file location does not exceed
volume block. New one is that a file content does not exceed volume
block(end of an ISO image). It is better than previous check even
if the issue did not happen.
While reading an ISO image generated by an older version of mkisofs
utility, a file location indicates the end the ISO image if its file
size is zero and it is the last file of all files of the ISO image,
so it is possible that the location value is the same as the number
of the total block of the ISO image.
http://code.google.com/p/libarchive/issues/detail?id=119
Revision 2955:
Issue 134: Fix libarchive 2.8 crashing in archive_write_finish() when
the open has failed and we're trying to write Zip format.
http://code.google.com/p/libarchive/issues/detail?id=134
Revision 2958:
Followup on Issue 134:
1) Port test_open_failure to libarchive 2.8 branch to test
the problem reported in Issue 134.
This test also shows that archive_read_open() sometimes
fails to report open errors correctly.
2) Fix the bug in archive_read.c
3) Comment out the tests that close functions are invoked
promptly when open fails; that's fully fixed in libarchive 3.0,
but I don't think it's worth fixing here.
Revision 3484:
Use uintmax_t with %ju
Revision 3487:
Fix issue 163.
Correctly allocate enough memory for a input buffer saved.
http://code.google.com/p/libarchive/issues/detail?id=163
Revision 3542:
Merge 2516, 2536 from trunk: Allow path table offset values of
0 and 18, which are used by some ISO writers.
Reviewed by: kientzle
Approved by: re (kib)
MFC after: 3 days
[mixing the two can be quite bad -- they define the same context structures,
but with differing structure members (and sizes)]
Update the hash function support comments, and update config_freebsd.h
to match.
Approved by: kientzle
In particular, this check avoids a warning when
extracting directory entries from certain GNU tar
archives that store directory contents.
MFC after: 3 days
because there's inter-entry garbage, just scan forward
to find the next one. This allows us to handle a lot
of Zip archives that have been modified in-place.
Thanks to: Gleb Kurtsou for sending me a sample archive
