Hide the locking logic used in the dynamic states implementation from
generic code. Rename ipfw_install_state() and ipfw_lookup_dyn_rule()
function to have similar names: ipfw_dyn_install_state() and
ipfw_dyn_lookup_state(). Move dynamic rule counters updating to the
ipfw_dyn_lookup_state() function. Now this function return NULL when
there is no state and pointer to the parent rule when state is found.
Thus now there is no need to return pointer to dynamic rule, and no need
to hold bucket lock for this state. Remove ipfw_dyn_unlock() function.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D11657
Upstream DTS has switched to using CCU rather than /clocks nodes. Add a CCU
driver for the a83t to bring us closer to upstream, but don't yet attach it
to ccu node.
Reviewed by: manu
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12843
Add a means to specify mask/value for the prediv condition instead of
shift/width/value for clocks that have a more complex mux scenario.
Specifically, ahb1 on the a83t has the prediv applied if mux is either b10
or b11.
Reviewed by: manu
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12851
An assertion was modified to use the found value, but it was not updated to
handle a race where blocked threads appear after the entrance to the func.
Move the assertion down to the area protected with sleepq lock where the
lock is read anyway. This does not affect coverage of the assertion and
is consistent with what rw locks are doing.
Reported by: Shawn Webb
The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12708
The pair is of use only in debug or LOCKPROF kernels, but was passed (zeroed)
for many locks even in production kernels.
While here whack the tid argument from wlock hard and xlock hard.
There is no kbi change of any sort - "external" primitives still accept the
pair.
The bwn(4) driver requires a number of extensions to the bhnd(4) PMU
interface to support external configuration of PLLs, LDOs, and other
parameters that require chipset or PHY-specific workarounds.
These changes add support for:
- Writing raw voltage register values to PHY-specific LDO regulator
registers (required by LP-PHY).
- Enabling/disabling PHY-specific LDOs (required by LP-PHY)
- Writing to arbitrary PMU chipctrl registers (required for common PHY PLL
reset support).
- Requesting chipset/PLL-specific spurious signal avoidance modes.
- Querying clock frequency and latency.
Additionally, rather than updating legacy PWRCTL support to conform to the
new PMU interface:
- PWRCTL API is now provided by a bhnd_pwrctl_if.m interface.
- Since PWRCTL is only found in older SSB-based chipsets, translation from
bhnd(4) bus APIs to corresponding PWRCTL operations is now handled
entirely within the siba(4) driver.
- The PWRCTL-specific host bridge clock gating APIs in bhnd_bus_if.m have
been lifted out into a standalone bhnd_pwrctl_hostb_if.m interface.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12664
On KERN_NO_SPACE error, as it is returned now, vm_map_find() continues
the loop searching for the suitable range for the requested mapping
with specific alignment. Since the vm_map_findspace() succesfully
finds the same place, the loop never ends.
The errors returned from vm_map_stack() completely repeat the behavior
of vm_map_insert() now, as suggested by Alan.
Reported by: Arto Pekkanen <aksyom@gmail.com>
PR: 223732
Reviewed by: alc, markj
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D13186
second scan of the address space with find_space = VMFS_ANY_SPACE is
performed. Previously, vm_map_find() released and reacquired the map lock
between the first and second scans. However, there is no compelling
reason to do so. This revision modifies vm_map_find() to retain the map
lock.
Reviewed by: jhb, kib, markj
MFC after: 1 week
X-Differential Revision: https://reviews.freebsd.org/D13155
With this bug fix we don't need to invalidate all the entries.
o Remove a call to pmap_invalidate_all(). This was never called
as the anyvalid variable is never set.
Obtained from: arm64/pmap.c (r322797, r322800)
Sponsored by: DARPA, AFRL
BHND Wi-Fi chipsets and SoCs share a common DMA engine, operating within
backplane address space. To support host DMA on Wi-Fi chipsets, the bridge
core maps host address space onto the backplane; any host addresses must
be translated to their corresponding backplane address.
- Defines a new bhnd_get_dma_translation(9) API to support querying DMA
address translation parameters from the bhnd(4) bus.
- Extends bhndb(4) to provide DMA translation descriptors from a DMA
address translation table defined in the host bridge-specific
bhndb_hwcfg.
- Defines bhndb(4) DMA address translation tables for all supported host
bridge cores.
- Extends mips/broadcom's bhnd_nexus driver to return an identity (no-op)
DMA translation descriptor; no translation is required when addressing
the SoC backplane.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12582
On BHND MIPS SoCs, this replaces the use of hard-coded MIPS IRQ#s in the
common bhnd(4) core drivers; we now register an INTRNG child PIC that
handles routing of backplane interrupt vectors via the MIPS core.
On BHND PCI devices, backplane interrupt vectors are now routed to the
PCI/PCIe host bridge core when bus_setup_intr() is called, where they are
dispatched by the PCI core via a host interrupt (e.g. INTx/MSI).
The bhndb(4) bridge driver tracks registered interrupt handlers for the
bridged bhnd(4) devices and manages backplane interrupt routing, while
delegating actual bus interrupt setup/teardown to the parent bus on behalf
of the bridged cores.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12518
In addition to some small style fixes to the ARMv6 vDSO, this release
includes a new vDSO that can be used for the execution of ARMv6/ARMv7
code on 64-bit platforms.
Just like for i686 on x86-64, this new vDSO is responsible for padding
arguments and return values to 64-bit values, so that the kernel can
easily forward system calls to the native system calls.
Obtained from: https://github.com/NuxiNL/cloudabi
The problem happens when the writes have offsets and sizes aligned with
a filesystem's recordsize (maximum block size). In this scenario
dmu_tx_assign() would fail because of being over the quota, but the uio
would already be modified in the code path where we copy data from the
uio into a borrowed ARC buffer. That makes an appearance of a partial
write, so zfs_write() would return success and the uio would be modified
consistently with writing a single block.
That bug can result in a data loss because the writes over the quota
would appear to succeed while the actual data is being discarded.
This commit fixes the bug by ensuring that the uio is not changed until
after all error checks are done. To achieve that the code now uses
uiocopy() + uioskip() as in the original illumos design. We can do that
now that uiocopy() has been updated in r326067 to use
vn_io_fault_uiomove().
Reported by: mav
Analyzed by: mav
Reviewed by: mav
Pointyhat to: avg (myself)
MFC after: 1 week
X-MFC after: r326067
X-Erratum: wanted
uiocopy() is currently unused, its purpose is copy data from a uio
without modifying the uio. It was in use before the vn_io_fault support
was added to ZFS, at which point our code diverged from the illumos code
a little bit. Because ZFS is the only (potential) user of the function
we are free to modify it to better suit ZFS needs.
The intention behind this change is to remove the differences introduced
earlier in zfs_write().
While here, re-implement uioskip() using uiomove() with
uio_segflg == UIO_NOCOPY.
The story of uioskip is the same as with uiocopy.
Reviewed by: mav
MFC after: 1 week
the system time.
As we seem to only read this time on boot, and this is the only source of
time on many arm64 machines we need to enable this by default there. As
this is not always the case with U-Boot firmware, or when we have been
booted from a non-UEFI environment we only enable the device driver when
the Runtime Services are present and reading the time doesn't result in an
error.
PR: 212185
Reviewed by: imp, kib
Tested by: emaste
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12650
case another thread has had the VFP unit enabled and will have its state
in the VFP registers along with it stored in memory. As such we don't need
to store the state, but do need to zero the fpcurthread pointer to stop
the VFP driver from using the enable fast path.
Reported by: emaste
Sponsored by: DARPA, AFRL
Some drm2 drivers will set PG_FICTITIOUS in physical pages in order to
satisfy the OBJT_MGTDEVICE object interface, so a scan may encounter
fictitous pages. For now, allow for this possibility; such pages will be
skipped later in the scan since they are wired.
Reported by: avg
Reviewed by: kib
MFC after: 1 week
produces hex numbers for the dsn. Since that come is from EDK2, change
this for symmetry, by generating the dsn as a hex number.
Noticed by: gpart list | grep efimedia | awk -F: '{print $2;}' | \
sed -e 's/^ *//g;s/,,/,/' | grep MBR | efidp -p | efidp -f
Sponsored by: Netflix
The vast majority of pmap_kextract() calls are looking for a physical memory
address, not a device address. By checking the page table first this saves
the formerly inevitable 64 (on e500mc and derivatives) iteration loop
through TLB1 in the most common cases.
Benchmarking this on the P5020 (e5500 core) yields a 300% throughput
improvement on dtsec(4) (115Mbit/s -> 460Mbit/s) measured with iperf.
Benchmarked on the P1022 (e500v2 core, 16 TLB1 entries) yields a 50%
throughput improvement on tsec(4) (~93Mbit/s -> 165Mbit/s) measured with
iperf.
MFC after: 1 week
Relnotes: Maybe (significant performance improvement)
This replaces a partial workaround introduced in r305527 that was
incompatible with nested INTRNG interrupt controllers if not also using
FDT.
On non-FDT MIPS INTRNG targets, we now preemptively produce a set of fixed
mappings for the MIPS IRQ range during nexus attach. On FDT targets,
OFW_BUS_MAP_INTR() remains responsible for mapping the MIPS IRQs.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12385
Like its predecessor ST8000AS0002, this is a drive-managed SMR drive, but
doesn't declare that in its ATA identify data.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
sys/cam/scsi/scsi_da.c
Complete BIO_FLUSH commands immediately if the da(4) device hasn't
been written to since the last flush. If we haven't written to the
device, there is no reason to send a flush.
Submitted by: gibbs
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13106
* Wrongly matches strings that are shorter than the pattern
* Fails to match negative character sets
* Fails to match character sets that aren't at the end of the pattern
* Fails to match character ranges
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13173
bit_nclear() takes the bit numbers for the start and end bits, not the start
and a count. This was resulting in memory corruption past the end of the
bitstr_t.
Sponsored by: Limelight Networks
Msdosfs allows setting READONLY by clearing the owner write bit of the file
mode. (While here, correct the misspelling of S_IWUSR as VWRITE. No
functional change.)
In msdosfs_getattr, intuitively reflect that READONLY attribute to userspace
in the file mode.
Reported by: Karl Denninger <karl AT denninger.net>
Sponsored by: Dell EMC Isilon
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
