This just walks the global list of devices looking for one with the
requested name. The one use case outside of devctl2's implementation
is for DDB commands that wish to lookup devices by name.
I was seeing the stack constantly attempt to renegotiate A-MPDU TX
even after 3 failures. My hunch is that the direct ticks comparison
is failing around the ticks wrap-around point.
This failure shouldn't /really/ happen normally, but it turns out being
the IBSS master node on FreeBSD doesn't quite setup 11n right, so
negotiating A-MPDU TX fails.
It's 2016 and vendors (including us!) still have 802.11n TX/RX sequence
handling bugs. It's suboptimal, but I'd rather see us default to handling
things in a sensible way.
So, just delete the #ifdef'ed code for now. I'll leave the option in
so it doesn't break existing configurations.
This all started because I've started getting reports about urtwn not
working after I enabled 802.11n support, and it's because the ARM kernel
configs don't include A-MPDU RX aging.
This allows one to enable DTrace probes relatively early during boot,
during SI_SUB_DTRACE_ANON, before dtrace(1) can invoked. The desired
enabling is created using dtrace -A, which writes a /boot/dtrace.dof
file and uses nextboot(8) to ensure that DTrace kernel modules are loaded
and that the DOF file describing the enabling is loaded by loader(8)
during the subsequent boot. The trace output can then be fetched with
dtrace -a.
With this commit, boot-time DTrace is only functional on i386 and amd64: on
other architectures, the high-resolution timer frequency is initialized
during SI_SUB_CLOCKS and is thus not available when the anonymous
tracing state is initialized. On x86, the TSC is used and is thus available
earlier.
MFC after: 1 month
Relnotes: yes
This allows the hrtimer to be used earlier during boot. This is required
for boot-time DTrace: anonymous enablings are created during
SI_SUB_DTRACE_ANON, which runs before APs are started. In particular,
the DTrace deadman timer requires that the hrtimer be functional.
MFC after: 2 weeks
This makes it easier to track which node is having what done do it
during normal use.
This is likely the eighth time I've done this since I started doing
net80211 development, so I think it's about time I just committed it.
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32openzfs/openzfs@9663688425
FreeBSD already had `zpool labelclear` functionality, so this is mostly
just a diff reduction.
MFC after: 1 month
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32
alignment aborts in ubldr.bin for RPi that started happening with clang 3.8
(earlier clang apparently didn't generate strd instructions that trigger
the alignment fault). The abort happened in ubldr.bin and not ubldr (elf
version) because the elf headers are 0xf4 bytes long, and stripping them
off left everything 4-byte aligned.
While here, also stop aligning the data segment to a page boundary, align
it to 8 bytes instead (aligning to a page just needlessly makes the file
bigger); pointed out by andrew@.
This is cosmetics that simplifies identification of new ports on FC switch.
It would be good to use target name from CTL here instead of hostname, but
it is not passed here through CAM now.
MFC after: 2 weeks
VM_NUMA_ALLOC is used to enable use of domain-aware memory allocation in
the virtual memory system. DEVICE_NUMA is used to enable affinity
reporting for devices such as bus_get_domain().
MAXMEMDOM must still be set to a value greater than for any NUMA support
to be effective. Note that 'cpuset -gd' always works if MAXMEMDOM is
enabled and the system supports NUMA.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5782
It looks like as with the safety belt of DELAY() fastened (*) we can
completely tear down and free all memory for TCP (after r281599).
(*) in theory a few ticks should be good enough to make sure the timers
are all really gone. Could we use a better matric here and check a
tcbcb count as an optimization?
PR: 164763
Reviewed by: gnn, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5734
The tcp_inpcb (pcbinfo) zone should be safe to destroy.
PR: 164763
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5732
We attach the "counter" to the tcpcbs. Thus don't free the
TCP Fastopen zone before the tcpcbs are gone, as otherwise
the zone won't be empty.
With that it should be safe to destroy the "tfo" zone without
leaking the memory.
PR: 164763
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5731
While there is no dependency interaction, stopping the timer before
freeing the rest of the resources seems more natural and avoids it
being scheduled an extra time when it is no longer needed.
Reviewed by: gnn, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5733
No need to keep type stability on raw sockets zone.
We've also been running with a KASSERT since r222488 to make sure the
ipi_count is 0 on destroy.
PR: 164763
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5735
While the pointer might not be too helpful, the malloc type might at
least give a good hint about which hashtbl we are talking.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Reviewed by: gnn, emaste
Differential Revision: https://reviews.freebsd.org/D5802
* Don't use arbitrary frames for the average RX RSSI - only frames
from the current BSSID
* Don't log / do the syncbeacon logic for another BSSID and definitely
don't do the syncbeacon call if we miss beacons outside of STA mode.
* Don't do the IBSS merge bits if the current node plainly won't ever
match our current BSS (ie, the IBSS doesn't have to match, but all
the same bits that we check in ieee80211_ibss_merge() have to match.)
Tested:
* ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks.
Sponsored by: Eva Automation, Inc.
The ath(4) driver now sees beacons and management frames for different
BSSIDs in IBSS mode, which is a problem when you're in a very busy
IBSS environment.
So, expose this function so drivers can use it to check if the current
RX node is actually for a BSS we need to pay attention to or not.
PR: kern/208644
Sponsored by: Eva Automation. Inc.
This prevents nodes being created for peers on BSSes that are not our own.
(Ie, same channel, IBSS, but different BSS.)
The "IBSS merge" thing was fixed by me enabling "see all beacons" in
the ath(4) driver a few months ago. Trouble is, we now need the filtering
again.
Tested:
* ath(4), IBSS, on a very busy IBSS channel with lots (> 15) IBSS networks.
PR: kern/208643
Sponsored by: Eva Automation, Inc.
Due to the bug in the number of 'GATHER' subdescriptors for TSO
packets, VNIC was not able to transmit more than one DMA segment
with TSO enabled.
Obtained from: Semihalf
Sponsored by: Cavium
