Just use p2->p_uarea directly instead.
- Remove an old and mostly bogus assertion regarding p2->p_sigacts.
- Use RANGEOF macro ala fork1() to clean up bzero/bcopy of p_stats.
ever since alpha/alpha/pmap.c revision 1.81 introduced the list allpmaps,
there has been no reason for having this function on Alpha. Briefly,
when pmap_growkernel() relied upon the list of all processes to find and
update the various pmaps to reflect a growth in the kernel's valid
address space, pmap_init2() served to avoid a race between pmap
initialization and pmap_growkernel(). Specifically, pmap_pinit2() was
responsible for initializing the kernel portions of the pmap and
pmap_pinit2() was called after the process structure contained a pointer
to the new pmap for use by pmap_growkernel(). Thus, an update to the
kernel's address space might be applied to the new pmap unnecessarily,
but an update would never be lost.
introduction of kern_mlock() and kern_munlock() in
src/sys/kern/kern_sysctl.c 1.150
src/sys/vm/vm_extern.h 1.69
src/sys/vm/vm_glue.c 1.190
src/sys/vm/vm_mmap.c 1.179
because different resource limits are appropriate for transient and
"permanent" page wiring requests.
Retain the kern_mlock() and kern_munlock() API in the revived
vslock() and vsunlock() functions.
Combine the best parts of each of the original sets of implementations
with further code cleanup. Make the mclock() and vslock()
implementations as similar as possible.
Retain the RLIMIT_MEMLOCK check in mlock(). Move the most strigent
test, which can return EAGAIN, last so that requests that have no
hope of ever being satisfied will not be retried unnecessarily.
Disable the test that can return EAGAIN in the vslock() implementation
because it will cause the sysctl code to wedge.
Tested by: Cy Schubert <Cy.Schubert AT komquats.com>
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.
Enable the RLIMIT_MEMLOCK checking code in kern_mlock().
Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.
Nuke the vslock() and vsunlock() implementations, which are no
longer used.
Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.
Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.
Modify the callers of sysctl_wire_old_buffer() to look for the
error return.
Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.
Reviewed by: bms
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
"scheduler" here has very little to do with scheduling. It is actually
the swapper, and it really must be the last SYSINIT'ed item like its
comment says, since proc0 metamorphoses into swapper by calling
scheduler() last in mi_start(), and scheduler() never returns.. Rev.1.29
of subr_4bsd.c broke this by adding another SI_ORDER_FIRST item
(kproc_start() for schedcpu_thread() onto the SI_SUB_RUN_SCHEDULER_LIST.
The sorting of SYSINITs with identical orders (at all levels) is
apparently nondeterministic, so this resulted in schedule() sometimes
being called second last and schedcpu_thread() not being called at all.
This quick fix just changes the code to almost match the comment
(SI_ORDER_FIRST -> SI_ORDER_ANY). "LAST" is misspelled "ANY", and
there is no way to ensure that there is only 1 very lst SYSINIT.
A more complete fix would remove the SYSINIT obfuscation.
must return EINVAL if size is zero. Submitted by: tegge
- In order to avoid a race condition in multithreaded applications, the
check and removal operations by munmap(2) must be in the same critical
section. To accomodate this, vm_map_check_protection() is modified to
require its caller to obtain at least a read lock on the map.
- All those diffs to syscalls.master for each architecture *are*
necessary. This needed clarification; the stub code generation for
mlockall() was disabled, which would prevent applications from
linking to this API (suggested by mux)
- Giant has been quoshed. It is no longer held by the code, as
the required locking has been pushed down within vm_map.c.
- Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
to express their intention explicitly.
- Inspected at the vmstat, top and vm pager sysctl stats level.
Paging-in activity is occurring correctly, using a test harness.
- The RES size for a process may appear to be greater than its SIZE.
This is believed to be due to mappings of the same shared library
page being wired twice. Further exploration is needed.
- Believed to back out of allocations and locks correctly
(tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).
PR: kern/43426, standards/54223
Reviewed by: jake, alc
Approved by: jake (mentor)
MFC after: 2 weeks
striping to a per device round-robin algorithm.
Because of the policy of not attempting to retain previous swap
allocation on page-out, this means that a newly added swap device
almost instantly takes its 1/N share of the I/O load but it takes
somewhat longer for it to assume it's 1/N share of the pages if there
is plenty of space on the other devices.
Change the 8G total swapspace limitation to 8G per device instead
by using a per device blist rather than one global blist. This
reduces the memory footprint by 75% (typically a couple hundred
kilobytes) for the common case with one swapdevice but NSWAPDEV=4.
Remove the compile time constant limit of number of swap devices,
there is no limit now. Instead of a fixed size array, store the
per swapdev structure in a TAILQ.
Total swap space is still addressed by a 32 bit page number and
therefore the upper limit is now 2^42 bytes = 16TB (for i386).
We still do not allocate the first page of each device in order to
give some amount of protection to any bsdlabel at the start of the
device.
A new device is appended after the existing devices in the swap space,
no attempt is made to fill in holes left behind by swapoff (this can
trivially be changed should it ever become a problem).
The sysctl vm.nswapdev now reflects the number of currently configured
swap devices.
Rename vm_swap_size to swap_pager_avail for consistency with other
exported names.
Change argument type for vm_proc_swapin_all() and swap_pager_isswapped()
to be a struct swdevt pointer rather than an index.
Not changed: we are still using blists to manage the free space,
but since the swapspace is no longer fragmented by the striping
different resource managers might fare better.
in sync with the backend machdep code. When cpu_thread_init() does not
have the same idea of KSTACK_PAGES as the thing that created the kstack,
all hell breaks loose.
Bad alc! no cookie! :-)
to the machine-independent parts of the VM. At the same time, this
introduces vm object locking for the non-i386 platforms.
Two details:
1. KSTACK_GUARD has been removed in favor of KSTACK_GUARD_PAGES. The
different machine-dependent implementations used various combinations
of KSTACK_GUARD and KSTACK_GUARD_PAGES. To disable guard page, set
KSTACK_GUARD_PAGES to 0.
2. Remove the (unnecessary) clearing of PG_ZERO in vm_thread_new. In
5.x, (but not 4.x,) PG_ZERO can only be set if VM_ALLOC_ZERO is passed
to vm_page_alloc() or vm_page_grab().
- Move struct sigacts out of the u-area and malloc() it using the
M_SUBPROC malloc bucket.
- Add a small sigacts_*() API for managing sigacts structures: sigacts_alloc(),
sigacts_free(), sigacts_copy(), sigacts_share(), and sigacts_shared().
- Remove the p_sigignore, p_sigacts, and p_sigcatch macros.
- Add a mutex to struct sigacts that protects all the members of the struct.
- Add sigacts locking.
- Remove Giant from nosys(), kill(), killpg(), and kern_sigaction() now
that sigacts is locked.
- Several in-kernel functions such as psignal(), tdsignal(), trapsignal(),
and thread_stopped() are now MP safe.
Reviewed by: arch@
Approved by: re (rwatson)
fork1() and never changes.
- The proc lock is enough to cover reading p_state, so push down sched_lock
into the PRS_NORMAL case of the switch on p_state.
race where a thread could assume that a process was swapped in by
PHOLD() when it actually wasn't fully swapped in yet.
- In faultin(), always msleep() if PS_SWAPPINGIN is set instead of doing
this check after bumping p_lock in the PS_INMEM == 0 case. Also,
sched_lock is only needed for setting and clearning swapping PS_*
flags and the swap thread inhibitor.
- Don't set and clear the thread swap inhibitor in the same loops as the
pmap_swapin/out_thread() since we have to do it under sched_lock.
Instead, mimic the treatment of the PS_INMEM flag and use separate loops
to set the inhibitors when clearing PS_INMEM and clear the inhibitors
when setting PS_INMEM.
- swapout() now returns with the proc lock held as it holds the lock
while adjusting the swapping-related PS_* flags so that the proc lock
can be used to test those flags.
- Only use the proc lock to check the swapping-related PS_* flags in
several places.
- faultin() no longer requires sched_lock to be held by callers.
- Rename PS_SWAPPING to PS_SWAPPINGOUT to be less ambiguous now that we
have PS_SWAPPINGIN.
trying to acquire it's proc lock since the proc lock may not have been
constructed yet.
- Split up the one big comment at the top of the loop and put the pieces
in the right order above the various checks.
Reported by: kris (1)
constants VM_MIN_ADDRESS, VM_MAXUSER_ADDRESS, USRSTACK and PS_STRINGS.
This is mainly so that they can be variable even for the native abi, based
on different machine types. Get stack protections from the sysentvec too.
This makes it trivial to map the stack non-executable for certain abis, on
machines that support it.
address space yet.
- Check whether a process is a system process prior to dereferencing
its p_vmspace. Aio assumes that only the curthread switches the address
space of a system process.
The process allocator now caches and hands out complete process structures
*including substructures* .
i.e. it get's the process structure with the first thread (and soon KSE)
already allocated and attached, all in one hit.
For the average non threaded program (non KSE that is) the allocated thread and its stack remain attached to the process, even when the process is
unused and in the process cache. This saves having to allocate and attach it
later, effectively bringing us (hopefully) close to the efficiency
of pre-KSE systems where these were a single structure.
Reviewed by: davidxu@freebsd.org, peter@freebsd.org
s/SNGL/SINGLE/
s/SNGLE/SINGLE/
Fix abbreviation for P_STOPPED_* etc flags, in original code they were
inconsistent and difficult to distinguish between them.
Approved by: julian (mentor)
by pmap_qenter() and pmap_qremove() is pointless. In fact, it probably
leads to unnecessary pmap_page_protect() calls if one of these pages is
paged out after unwiring.
Note: setting PG_MAPPED asserts that the page's pv list may be
non-empty. Since checking the status of the page's pv list isn't any
harder than checking this flag, the flag should probably be eliminated.
Alternatively, PG_MAPPED could be set by pmap_enter() exclusively
rather than various places throughout the kernel.
