- Move private data about ATIOs/INOTs from per-LUN to per-channel data.
This allows active commands to continue operation after LUN destruction.
This also simplifies lookup of the data by tag in some situations.
- Unify three restart_queue processing implementations.
- Complete all ATIOs from restart_queue on LUN disable.
- Delete ATIO private data when command completed or aborted, not depending
on the ATIO being requeued, that was ugly hack and could never happen. CAM
should always call ether XPT_CONT_TARGET_IO with status or XPT_ABORT.
- Implement XPT_ABORT for queued ATIOs/INOTs to allow CAM do graceful
shutdown, not depending on LUN disable, as it is done in ahd(4)/targ(4).
- Unify isp_endcmd() arguments to make it more usable in generic code.
- Remove never really used LUN state reference counter.
MFC after: 2 weeks
* This is more similar to how code/definitions are distributed in
Linux's iwlwifi.
* This should make recognizing new chipset variants, and adding additional
flags from the Linux iwlwifi code easier, without blowing up if_iwm.c
Obtained from: dragonflybsd.git 27d11320e707d2c41424efc1983762f6799941d6
* Just add the struct iwm_cfg pointers to the iwm_devices array, to get
rid of the large switch clause.
Obtained from: dragonflybsd.git 35f0e6c86c1654323d6b19f7a077f4ab8ac85868
if the fdt data doesn't provide a gpio pin for reading the write protect
switch and also doesn't contain a "wp-disable" property.
In r311735 the long-bitrotted code in this driver for using the non-
standard fdt "mmchs-wp-gpio-pin" property was replaced with new common
support code for handling write-protect and card-detect gpio pins. The
old code never found a property with that name, and the logic was to
assume that no gpio pin meant that the card was not write protected.
The new common code behaves differently. If there is no fdt data saying
what to do about sensing write protect, the value in the standard SDHCI
PRESENT_STATE register is used. On this hardware, if there is no signal
for write protect muxed into the sd controller then that bit in the
register indicates write protect.
The real problem here is the fdt data, which should contain "wp-disable"
properties for eMMC and micro-sd slots where write protect is not even
an option in the hardware, but we are not in control of that data, it
comes from linux. So we have to make the same flawed assumption in our
driver that the corresponding linux driver has: no info means no protect.
Reported by: several users on the arm@ list
Pointy hat: me, for not testing enough before committing r311735
* The sc->sc_uc.uc_error_event_table value is now at sc->error_event_table,
and not sc->umac_error_event_table.
Obtained from: dragonflybsd.git 612855b1a8c321ec9ba34f63edf913e7ecff8363
* Use the notification wait API, like it's done in the Linux iwlwifi code,
to wait for the IWM_MVM_ALIVE notification.
* This also should fix some firmware load interrupt issues, and errors
in the nic lock using.
Tested:
* (adrian) Intel 7260, STA mode
Obtained from: dragonflybsd.git a7697ea01c11fd493aec52260a02f31df680eb91
* While there, rename some functions to match the names and functionality
of the similarly named functions in Linux iwlwifi.
Obtained from: dragonflybsd.git e98ee77a816bfd8b4912047b93dfb2c560788f24
the same CXXABI verions as recent libstdc++.
Note that __int128 types are only available on arches where long long is
128 bit wide.
Noticed by: harti
MFC after: 2 weeks
The difference of one was insignificant because zio_write_issue threads
ended up on the same run queues as other zio threads.
See sys/priority.h and sys/runq.h for more details.
Add a comment describing FreeBSD priority considerations and restore
the illumos variant of the code for comparison.
Obtained from: Panzura
MFC after: 2 weeks
Sponsored by: Panzura
show pte from the pmap of the process of the current DDB thread, instead
of necessarily the PCPU pmap.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: kib
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9645
In the Kyua era, it's no longer necessary to set PJDFSTEST_TEST_PATH. Just
use TMPDIR instead.
Reviewed by: ngie
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9340
The build process generates *assym.h using nm from *genassym.o (which is
in turn created from *genassym.c).
When compiling with link-time optimization (LTO) using -flto, .o files
are LLVM bitcode, not ELF objects. This is not usable by genassym.sh,
so remove -flto from those ${CC} invocations.
Submitted by: George Rimar
Reviewed by: dim
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9659
then return EAGAIN. The current code just returns that if the LAST buf
failed.
Reviewed by: kib@, trasz@
Differential Revision: https://reviews.freebsd.org/D9677
The current code is written on top of GFS, a library with the generic
support for writing filesystems, which was ported from illumos.
Because of significant differences between illumos VFS and FreeBSD
VFS models, both the GFS and zfsctl code were heavily modified to
work on FreeBSD. Nonetheless, they still contain quite a few ugly
hacks and bugs.
This is a reimplementation of the zfsctl code where the VFS-specific
bits are written from scratch and only the code that interacts with
the rest of ZFS is reused.
Some highlights.
We use two types of nodes, static and on-demand. The static nodes
are used for permanent directories like .zfs, .zfs/snapshot, etc. The
on-demand nodes are used for ephemeral directories that act as snapshot
mount points.
Initially only static nodes are created. Their vnodes are instantiated
when they are looked up. The on-demand nodes and vnodes are instantiated
as needed and the nodes are destroyed as soon as the corresponding
vnodes are reclaimed.
We also try very hard to ensure that uncovered snapshot vnodes do not
linger. They are supposed to become inactive as soon as they are
uncovered and we try to recycle them immediately.
When a filesystem is unmounted all snapshots under .zfs are unmounted
first, then all vnodes are flushed and finally the static .zfs nodes
are destroyed.
There are some changes outside of zfsctl code too.
z_ctldir is never used directly (as it is an opaque pointer),
zfsctl_root() has to be used instead. The function returns a locked
vnode now, so it accepts a lock flags parameter. The function can
also fail now, e.g. during force unmounting, whereas previously it
was infallible.
zfsctl_root_lookup() is retired, instead of it VOP_LOOKUP() on the .zfs
vnode (obtained with zfsctl_root) is used.
Some ideas are picked from an independent work by will.
Reviewed by: asomers, smh
MFC after: 1 month
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D7421
would be useless anyway - there is no point in pretending to have block
devices; our "block" devices are in fact character ones, and can only
be accessed as such.
Discussed with: dchagin
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
For some reason isp_handle_platform_notify_fc() allocated INOT just
before calling isp_handle_platform_target_tmf(), which also allocates
INOT. It seems to be a braino introduced in r196008.
MFC after: 2 weeks
1) Add better spinlock debug names when WITNESS_ALL is defined.
2) Make sure that the calling thread gets bound to the current CPU
while a spinlock is locked. Some Linux kernel code depends on that the
CPU ID doesn't change while a spinlock is locked.
3) Add support for using LinuxKPI spinlocks during a panic().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Tasklets are implemented using a taskqueue and a small statemachine on
top. The additional statemachine is required to ensure all LinuxKPI
tasklets get serialized. FreeBSD taskqueues do not guarantee
serialisation of its tasks, except when there is only one worker
thread configured.
MFC after: 1 week
Sponsored by: Mellanox Technologies
A set of helper functions have been added to manage the life of the
LinuxKPI task struct. When an external system call or task is invoked,
a check is made to create the task struct by demand. A thread
destructor callback is registered to free the task struct when a
thread exits to avoid memory leaks.
This change lays the ground for emulating the Linux kernel more
closely which is a dependency by the code using the LinuxKPI APIs.
Add new dedicated td_lkpi_task field has been added to struct thread
instead of abusing td_retval[1].
Fix some header file inclusions to make LINT kernel build properly
after this change.
Bump the __FreeBSD_version to force a rebuild of all kernel modules.
MFC after: 1 week
Sponsored by: Mellanox Technologies
As discussed previously, in order to introduce new OS hardening
defaults, we've added them to bsdinstall in 'off by default' mode.
It has been there for a while, so the next step is to change them
to 'on by defaul' mode, so that in future we could simply enable
them in base OS.
Reviewed by: brd
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D9641
When LUN is disabled, SIM starts returning queued ATIOs/INOTs. But at the
same time there can be some ATIOs/INOTs still carrying real new requests.
If we free those, SIM may leak some resources, forever expecting for any
response from us. So try to be careful, separating ATIOs/INOTs carrying
requests which still must be processed, from ATIOs/INOTs completed with
errors which can be freed.
MFC after: 2 weeks
Previously, the first lines of various generated files from system call
tables were generated in two sections. Some of the initialization was
done in BEGIN, and the rest was done when the first line was encountered.
The main reason for this split before r313564 was that most of the
initialization done in the second section depended on the $FreeBSD$ tag
extracted from the system call table. Now that the $FreeBSD$ tag is no
longer used, consolidate all of the file initialization in the BEGIN
section.
This change was tested by confirming that the content of generated files
did not change.
