Make sure the "device_is_gone" flag is cleared after every successful open,
so that the "device_is_gone" flag doesn't persist forever.
Found by: sergii.dmytruk@3mdeb.com
PR: 256296
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Now the .pc ends up in the correct package (-dev)
Reviewed by: bapt, emaste
Differential Revision: https://reviews.freebsd.org/D29172
MFC after: 2 weeks
interface numbering for USB descriptors in userspace. Else certain USB
control requests using the interface number, won't be recognized by the
USB firmware.
Refer to section 9.2.3 in the USB 2.0 specification:
Interfaces are numbered from zero to one less than the number of concurrent interfaces
supported by the configuration.
PR: 251784
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Specifically, add LIBUSB_CLASS_PHYSICAL and the libusb_has_capability API.
Descriptions and functionality for these derived from the
documentation at [0]. The current set of capabilities are all supported by
libusb.
These were detected as missing after updating net/freerdp to 2.1.1, which
attempted to use both.
[0] http://libusb.sourceforge.net/api-1.0/group__libusb__misc.html
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25194
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
The debug level generally just controls verbosity of libusb for debugging
libusb devices/usage. We allow the environment to set the debug level
independent of the application, but the application will always override
this if it explicitly sets the debug level.
Changing the environment is easy, but patching the software to change the
debug level isn't necessarily easy or possible. Further, there's this
write-only debug_fixed variable that would seem to imply that the debug
level should be fixed, but it isn't currently used. Change the logic to use
strtol() so we can detect real 0 vs. conversion failure, then honor
debug_fixed in libusb_set_debug.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21877
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
devices are enumerated regardless of of the LIBUSB_HOTPLUG_ENUMERATE
flag. Make sure when the flag is not specified no arrival events are
generated for currently enumerated devices.
MFC after: 3 days
Sponsored by: Mellanox Technologies
configuration descriptor reads early on to avoid issues with devices
that don't check for a valid USB configuration read request.
Submitted by: takahiro.kurosawa@gmail.com
PR: 238412
MFC after: 3 days
make sure there is always a master polling thread, by setting the "ctx_handler"
field in the context. Else the reception of completion events can stop.
This happens if event threads are created and destroyed during runtime.
Found by: Ludovic Rousseau <ludovic.rousseau+freebsd@gmail.com>
PR: 231742
MFC after: 1 week
Approved by: re (kib)
Sponsored by: Mellanox Technologies
and transfer prints. Make sure the debug level comes from the
correct USB context.
Found by: Ludovic Rousseau <ludovic.rousseau+freebsd@gmail.com>
PR: 231264
MFC after: 1 week
Approved by: re (kib)
Sponsored by: Mellanox Technologies
been detached. When a USB device has been detached the kernel file handle
stops responding to commands. USB applications which continue to run after
the USB device has been detached, depend on LibUSB generated events to tear
down its pending USB transfers. Add code to handle the needed cleanup when
processing the USB transfer(s) fails and prevent new USB transfer(s) from
being submitted.
Found by: Ludovic Rousseau <ludovic.rousseau+freebsd@gmail.com>
PR: 231076
MFC after: 1 week
Approved by: re (gjb)
Sponsored by: Mellanox Technologies
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Some libusb consumers in Linux-land (in this case, libusb4java) expect a
dev_capability member that they can use to enumerate the device
capabilities.
No particular layout is expected of this, just that it can be traversed
using the bLength member until bNumDeviceCapabilities are read and that the
consumer may then use one of the libusb_get_*_descriptor methods to extract
specific (usb 2.0 vs. ss) capability information.
In collaboration with: hselasky
Reviewed by: hselasky
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11494
"product vendor". This is consistent with how it's generally done.
The ordering is visible eg in usbconfig(8) output.
Note to self: MFC this to 9 and 8.
Reviewed by: hselasky@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8258
ISOCHRONOUS USB transfers. Make sure enough length and buffer pointers
are allocated when setting up the libusb transfer structure to support
the maximum number of frames the kernel can handle.
MFC after: 1 week
libusb_hotplug_deregister_callback() for the LibUSB v1.0 API and
update the libusb(3) manual page.
Approved by: re (kib)
Requested by: swills
MFC after: 1 week
reset command, alternate setting command or set configuration
command. Else LibUSB v1.0 will not re-open the endpoints which the
kernel closes and the USB application might wait infinitely for
transfers to complete.
Approved by: re (hrs)
MFC after: 3 days
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
Fix a warning triggered by the gcc + FORTIFY_SOURCE patches:
In function 'libusb20_parse_config_desc': lib/libusb/libusb20_desc.c:141:
warning: passing argument 1 of 'memcpy' discards qualifiers from pointer
target type
Submitted by: hselansky
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
