NetBSD compatible.
Add parameter to fo_read and fo_write. (The only flag FOF_OFFSET mean that
the offset is set in the struct uio).
Factor out some common code from read/pread/write/pwrite syscalls.
is the preparation step for moving pmap storage out of vmspace proper.
Reviewed by: Alan Cox <alc@cs.rice.edu>
Matthew Dillion <dillon@apollo.backplane.com>
c_caddr_t with extreme prejudice. Here the original casts to
caddr_t were to support K&R compilers (or missing prototypes),
but the relevant source files require an ANSI compiler.
changes to the VM system to support the new swapper, VM bug
fixes, several VM optimizations, and some additional revamping of the
VM code. The specific bug fixes will be documented with additional
forced commits. This commit is somewhat rough in regards to code
cleanup issues.
Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
nearly so many casts here. Casting an pointer that was an integer
back to an integer just to compare it with -1 is bad, and casting
it back just to compare it with NULL is just wrong.
Not sure of the result of it..
(may or may not effect anything) but it's fixed now.
(found by: comparing what cvsup sent back to me with what I tested..)
There is only cdevsw (which should be renamed in a later edit to deventry
or something). cdevsw contains the union of what were in both bdevsw an
cdevsw entries. The bdevsw[] table stiff exists and is a second pointer
to the cdevsw entry of the device. it's major is in d_bmaj rather than
d_maj. some cleanup still to happen (e.g. dsopen now gets two pointers
to the same cdevsw struct instead of one to a bdevsw and one to a cdevsw).
rawread()/rawwrite() went away as part of this though it's not strictly
the same patch, just that it involves all the same lines in the drivers.
cdroms no longer have write() entries (they did have rawwrite (?)).
tapes no longer have support for bdev operations.
Reviewed by: Eivind Eklund and Mike Smith
Changes suggested by eivind.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.
Most uses of time.tv_sec now uses the new variable time_second instead.
gettime() changed to getmicrotime(0.
Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).
A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.
Add a new nfs_curusec() function.
Mark a couple of bogosities involving the now disappeard time variable.
Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.
Change profiling in ncr.c to use ticks instead of time. Resolution is
the same.
Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.
Reviewed by: bde
_KPOSIX_PRIORITY_SCHEDULING options to work. Changes:
Change all "posix4" to "p1003_1b". Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;
Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;
Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;
Add options to LINT;
Minor fixes to P1003_1B code during testing.
or aio_write can return the pid of the new thread. This is due to the
way that return values from system calls being passed by side-effect in
the proc structure now. This commit fixes the problem with aio_read and
aio_write.
remove alot of overly verbose debugging statements.
ioproclist {
int aioprocflags; /* AIO proc flags */
TAILQ_ENTRY(aioproclist) list; /* List of processes */
struct proc *aioproc; /* The AIO thread */
TAILQ_HEAD (,aiocblist) jobtorun; /* suggested job to run */
};
/*
* data-structure for lio signal management
*/
struct aio_liojob {
int lioj_flags;
int lioj_buffer_count;
int lioj_buffer_finished_count;
int lioj_queue_count;
int lioj_queue_finished_count;
struct sigevent lioj_signal; /* signal on all I/O done */
TAILQ_ENTRY (aio_liojob) lioj_list;
struct kaioinfo *lioj_ki;
};
#define LIOJ_SIGNAL 0x1 /* signal on all done (lio) */
#define LIOJ_SIGNAL_POSTED 0x2 /* signal has been posted */
/*
* per process aio data structure
*/
struct kaioinfo {
int kaio_flags; /* per process kaio flags */
int kaio_maxactive_count; /* maximum number of AIOs */
int kaio_active_count; /* number of currently used AIOs */
int kaio_qallowed_count; /* maxiumu size of AIO queue */
int kaio_queue_count; /* size of AIO queue */
int kaio_ballowed_count; /* maximum number of buffers */
int kaio_queue_finished_count; /* number of daemon jobs finished */
int kaio_buffer_count; /* number of physio buffers */
int kaio_buffer_finished_count; /* count of I/O done */
struct proc *kaio_p; /* process that uses this kaio block */
TAILQ_HEAD (,aio_liojob) kaio_liojoblist; /* list of lio jobs */
TAILQ_HEAD (,aiocblist) kaio_jobqueue; /* job queue for process */
TAILQ_HEAD (,aiocblist) kaio_jobdone; /* done queue for process */
TAILQ_HEAD (,aiocblist) kaio_bufqueue; /* buffer job queue for process */
TAILQ_HEAD (,aiocblist) kaio_bufdone; /* buffer done queue for process */
};
#define KAIO_RUNDOWN 0x1 /* process is being run down */
#define KAIO_WAKEUP 0x2 /* wakeup process when there is a significant
event */
TAILQ_HEAD (,aioproclist) aio_freeproc, aio_activeproc;
TAILQ_HEAD(,aiocblist) aio_jobs; /* Async job list */
TAILQ_HEAD(,aiocblist) aio_bufjobs; /* Phys I/O job list */
TAILQ_HEAD(,aiocblist) aio_freejobs; /* Pool of free jobs */
static void aio_init_aioinfo(struct proc *p) ;
static void aio_onceonly(void *) ;
static int aio_free_entry(struct aiocblist *aiocbe);
static void aio_process(struct aiocblist *aiocbe);
static int aio_newproc(void) ;
static int aio_aqueue(struct proc *p, struct aiocb *job, int type) ;
static void aio_physwakeup(struct buf *bp);
static int aio_fphysio(struct proc *p, struct aiocblist *aiocbe, int type);
static int aio_qphysio(struct proc *p, struct aiocblist *iocb);
static void aio_daemon(void *uproc);
SYSINIT(aio, SI_SUB_VFS, SI_ORDER_ANY, aio_onceonly, NULL);
static vm_zone_t kaio_zone=0, aiop_zone=0,
aiocb_zone=0, aiol_zone=0, aiolio_zone=0;
/*
* Single AIOD vmspace shared amongst all of them
*/
static struct vmspace *aiovmspace = NULL;
/*
* Startup initialization
*/
void
aio_onceonly(void *na)
{
TAILQ_INIT(&aio_freeproc);
TAILQ_INIT(&aio_activeproc);
TAILQ_INIT(&aio_jobs);
TAILQ_INIT(&aio_bufjobs);
TAILQ_INIT(&aio_freejobs);
kaio_zone = zinit("AIO", sizeof (struct kaioinfo), 0, 0, 1);
aiop_zone = zinit("AIOP", sizeof (struct aioproclist), 0, 0, 1);
aiocb_zone = zinit("AIOCB", sizeof (struct aiocblist), 0, 0, 1);
aiol_zone = zinit("AIOL", AIO_LISTIO_MAX * sizeof (int), 0, 0, 1);
aiolio_zone = zinit("AIOLIO",
AIO_LISTIO_MAX * sizeof (struct aio_liojob), 0, 0, 1);
aiod_timeout = AIOD_TIMEOUT_DEFAULT;
aiod_lifetime = AIOD_LIFETIME_DEFAULT;
jobrefid = 1;
}
/*
* Init the per-process aioinfo structure.
* The aioinfo limits are set per-process for user limit (resource) management.
*/
void
aio_init_aioinfo(struct proc *p)
{
struct kaioinfo *ki;
if (p->p_aioinfo == NULL) {
ki = zalloc(kaio_zone);
p->p_aioinfo = ki
support was missing in the previous version of the AIO code. More
tunables added, and very efficient support for VCHR files has been added.
Kernel threads are not used for VCHR files, all work for such files is
done for the requesting process directly. Some attempt has been made to
charge the requesting process for resource utilization, but more work
is needed. aio_fsync is still missing (but the original fsync system
call can be used for now.) aio_cancel is essentially a noop, but that
is okay per POSIX. More aio_cancel functionality can be added later,
if it is found to be needed.
The functions implemented include:
aio_read, aio_write, lio_listio, aio_error, aio_return,
aio_cancel, aio_suspend.
The code has been implemented to support the POSIX spec 1003.1b
(formerly known as POSIX 1003.4 spec) features of the above. The
async I/O features are truly async, with the VCHR mode of operation
being essentially the same as physio (for appropriate files) for
maximum efficiency. This code also supports the signal capability,
is highly tunable, allowing management of resource usage, and
has been written to allow a per process usage quota.
Both the O'Reilly POSIX.4 book and the actual POSIX 1003.1b document
were the reference specs used. Any filedescriptor can be used with
these new system calls. I know of no exceptions where these
system calls will not work. (TTY's will also probably work.)
it in struct proc instead.
This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.
I have not removed the /*ARGSUSED*/, they will require some looking at.
libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
now corrected. New tunables/instrumentation added. The code is now
likely "good enough to use." I will add the userland support soon.
The "high performance" mode for raw devices is still missing, and will
be added next. POSIX system calls that now appear to work:
aio_cancel, aio_error, aio_read, aio_return, aio_suspend, aio_write,
lio_listio. Missing, but to be added soon: aio_fsync.
POSIX.4. Additionally, there is some initial code that supports LIO.
This code supports AIO/LIO for all types of file descriptors, with
few if any restrictions. There will be a followup very soon that
will support significantly more efficient operation for VCHR type
files (raw.) This code is also dependent on some kernel features
that don't work under SMP yet. After I commit the changes to the
kernel to support proper address space sharing on SMP, this code
will also work under SMP.
