tree support includes a device tree source compiler dtc(8) which
converts .dts files into .dtb files. /boot/loader will load dtb files
from this directory by default, allowing for fewer differences between
images for different SoCs. Compiled dts files will wind up here
eventually as an alternative to embedding them into the kernel.
Document this in hier(7), as well as add missing entries for
/boot/firmware and /boot/zfs, though the latter two should only be
considered place holders if someone wants to make them better.
Use of "find ." resulted in METALOG entries with an extra ./ -- e.g.,
./usr/share/zoneinfo/./America/Toronto. Avoid this by using globbing
via "find *" instead.
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D719
This allows WITH_DEBUG_FILES to produce standalone debug for the ELF
runtime linker.
We previously disabled standalone debug files for bsd.prog.mk consumers
that included a non-default ${PROG} target, but this is not required.
Consumers that do not support standalone debug are still handled by
disabling it for statically linked binaries, and for those that specify
a non-default binary format.
Sponsored by: DARPA, AFRL
While there, add a NO_WTHREAD_SAFETY flag that can be used to disable
this specific warning flag. Disable it for auditdistd. We can easily
patch up auditdistd to have the right annotations to build, but as
auditdistd is intended to be portable across other operating systems,
it's not worth the effort.
Approved by: brueffer@
packets at all. Swapping byte order on SOCK_RAW was actually a bug, an
artifact from the BSD network stack, that used to convert a packet to
native byte order once it is received by kernel.
Other operating systems didn't follow this, and later other BSD
descendants fixed this, leaving us alone with the bug. Now it is
clear that we should fix the bug.
In collaboration with: Olivier Cochard-Labbé <olivier cochard.me>
See also: https://wiki.freebsd.org/SOCK_RAW
Sponsored by: Nginx, Inc.
appropriate (i.e. where syscons was already mentioned and vt supports the
feature). Comments in defaults/rc.conf are updated to match the contents
of the modified man-page rc.conf(5).
Reviewed by: pluknet, emaste
MFC after: 3 days
Add LIBSSP_NONSHARED to bsd.libnames.mk and append LIBSSP_NONSHARED to DPADD in
lib/libc when MK_SSP != no
Approved by: rpaulo (mentor)
MFC after: 3 days
Phabric: D675 (as part of a larger diff)
PR: 192728
then it is no longer necessary to "bhyvectl --destroy" the VM when it reboots.
Move the "bhyvectl --destroy" outside of the while loop.
Reviewed by: neel
several updates to the converter tools. There is now support for hybrid
source keymaps, which e.g. use ISO8859-1 (not -15) but still provide an
Euro key (on the "E" key). ISO8859-1 currency symbols on other keys are
still converted to that character, not the Euro sign. A similar hack was
applied to the Japanese keyboards to add the Yen key, that could not be
expressed in SYSCONS.
Several modifications have been applied after the conversion (removal of
unused accents tables, some reformatting, exchange of a few key symbols).
The German keymap (de.kbd) is now using deadkeys only for those keys,
that behave that way under Windows. There are now ".acc" and ".noacc"
variants, which use deadkeys vs. nodeadkeys for all accent keys.
I'm still in the process of comparing keymaps that existed in different
encodings in SYSCONS. These are generally translated slightly differently,
either because of mistakes, or because of different preferences, or due
to limitations of the respective encoding.
MFC after: 3 days
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
but shall provide an Euro sign - similar for Japanese Yen).
The Brazilian keymap "br.kbd" now has accents, by default - the no-accents
version has been renamed to "br.noacc.kbd".
MFC after: 3 days
I have spent many hours comparing source and destination formats, and hope
to have caught the most severe conversion errors.
Files were converted with a Perl script which I'll shortly commit to the
tools directory. This script is a much enhanced version of the one
provided by ray@ and is expected to support the full kbdmap(5) syntax.
The naming convention used is:
<2-letter country code>.<variant>.kbd
Only if there are multiple layouts for different languages:
<2-letter country code>-<2-letter language code>.<variant>.kbd
In nearly all cases, the keyboards are country specific, only. Currently
there is only one case where the language was added ("ch-fr.kbd" for
the Swiss-French keyboard layout).
I choose to write Unicode character codes as hex numbers. While this
increases the diff to the SYSCONS keymap files for the trivial cases
(conversion from ISO8859-1), it really helps to verify the more complex
cases against a Unicode table (which is indexed by hex numbers).
This commit does not cover all files that have been converted, since I
need to sort out which ones to use, if there were several with different
source encodings to choose from.
Review and test of the keymap files is highly desirable before 10.1 is
released. I'd also appreciate educated opinions regarding the optimum
variant (to be made available as the default for each language).
Since there are no NEWCONS keymaps in 10-STABLE, I plan to MFC after
the minimum allowed delay of 3 days, to allow at least a few weeks to
test and improve what will be in the next release.
MFC after: 3 days
The use of the old ISO language code "iw" for Hebrew was inconsistent
and it is replaced by the new language code "he" (which was already
used for the keyboard menu entry, but not for the menu heading or the
default font).
These changes are in preparation of the conversion of this file and
the keymap definitions to Unicode for use with NEWCONS.
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
These were copied from share/syscons/keymaps/??.iso.kbd. They were
not actually ISO 8859-1 as assumed. When interpreted as Unicode they
ended up with the generic currency sign (U+00A4) instead of the euro
(U+20AC).
Reported by: Claude Buisson, tijl@
the build starts.
This adds a new variable DHDRS that contains a list of all DTrace
header files. Then, we use the beforedepend hook to make sure the
heaeder files are built.
Introduce a beforebuild dependency (from projects/bmake) based on
feedback from Simon J. Gerraty. This lets us generate the header
files without running make depend.
Reviewed by: sjg, imp
MFC after: 3 days
