- Removed libopie and libmd; libopie used to serve auth-skey.c
which is compiled now only to ease maintenance, as well as
a few other auth-*.c sources.
Reviewed by: des
"kerberize" and "dekerberize" in kerberos5/Makefile. These can
be used to recompile bits with optional crypto support with and
without crypto, respectively.
Reviewed by: markm
and rebuilt some bits with crypto but without Kerberos support
(most notably SSH) during "make release", to put them into the
"crypto" distribution.
Now that we don't ship the separate "krb5" distribution anymore
(it's now part of the "crypto" distribuion), don't waste time
recompiling SSH bits without crypto and without Kerberos support
in an attempt to put them in the "base" distribution -- it just
doesn't work as SSH always uses crypto code.
We avoid this by not rebuilding KPROGS from kerberos5/Makefile in
release/Makefile and adding "libpam" to SPROGS in secure/Makefile
to ensure it's still rebuilt without crypto support for the "base"
distribution. (Disabling crypto (NOCRYPT) also disables building
of Kerberos-related PAM modules, and it's OK to depend on this.)
This should be a no-op change saving some "make release" time.
it. While not strictly required, it unbreaks the cross-build world that
is resulting from moving the libraries around.
I have a more permanent solution to this problem in the works, but I
asked des for permission to commit this to get the ball rolling. This
also makes the ssh build more along the lines of what the openssh-portable
and OpenBSD openssh Makefile glue does.
Reviewed by: des
binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
Previously, there were two copies of telnet; a non-crypto version
that lived in the usual places, and a crypto version that lived in
crypto/telnet/. The latter was built in a broken manner somewhat akin
to other "contribified" sources. This meant that there were 4 telnets
competing with each other at build time - KerberosIV, Kerberos5,
plain-old-secure and base. KerberosIV is no longer in the running, but
the other three took it in turns to jump all over each other during a
"make buildworld".
As the crypto issue has been clarified, and crypto _calls_ are not
a problem, crypto/telnet has been repo-copied to contrib/telnet,
and with this commit, all telnets are now "contribified". The contrib
path was chosen to not destroy history in the repository, and differs
from other contrib/ entries in that it may be worked on as "normal"
BSD code. There is no dangerous crypto in these sources, only a
very weak system less strong than enigma(1).
Kerberos5 telnet and Secure telnet are now selected by using the usual
macros in /etc/make.conf, and the build process is unsurprising and
less treacherous.
libdes, and functionally close enough so that we created symlinks
(libdes -> libcrypto) to help older applications. With the import of
OpenSSL 0.9.7, this is no longer true and we no longer install these
symlinks. However, systems that are upgraded may have these symlinks,
which could cause non-obvious breakage at build-time. Therefore, blow
any old symlinks away in the `afterinstall' target.
When libdes was replaced with OpenSSL's libcrypto, there were a few
interfaces that the former implemented but the latter did not. Because
some software in the base system still depended upon these interfaces,
we simply included them in our libcrypto (rnd_keys.c).
Now, finally get around to removing the dependencies on these
interfaces. There were basically two cases:
des_new_random_key -- This is just a wrapper for des_random_key, and
these calls were replaced.
des_init_random_number_generator et. al. -- A few functions were used
by the application to seed libdes's PRNG. These are not necessary
when using libcrypto, as OpenSSL internally seeds the PRNG from
/dev/random. These calls were simply removed.
Again, some of the Kerberos 4 files have been taken off the vendor
branch. I do not expect there to be future imports of KTH Kerberos 4.
can only be built with MIT Kerberos.
If we didn't define this here, then SSL-using applications would have
to define OPENSSL_NO_KRB5 themselves in order to build.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
depending on perl at build time. Makefile.asm is a helper for after the
next import.
With my cvs@ hat on, the relatively small repo cost of this is acceptable,
especially given that we have other (much bigger) things like
lib*.so.gz.uu checked in under src/lib/compat/*.
Reviewed by: kris (maintainer)
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
dependencies in the correct place, record the fact that -lssh
depends on -lcrypto and -lz.
Removed false dependencies on -lz (except ssh(1) and sshd(8)).
Removed false dependencies on -lcrypto and -lutil for scp(1).
Reviewed by: markm
- Spam /usr/lib some more by making libssh a standard library.
- Tweak ${LIBPAM} and ${MINUSLPAM}.
- Garbage collect unused libssh_pic.a.
- Add fake -lz dependency to secure/ makefiles needed for
dynamic linkage with -lssh.
Reviewed by: des, markm
Approved by: markm
