but in System III in the AT&T world.
Examination of the TUHS archives shows this was present in 4.3-Reno
and System III.
Reviewed by: 0mp@, allanjude@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D25479
The vdev_init() does check for "known" vdev types, the [log] device removal will create "hole"
device, but vdev_init() does not allow it.
Obtained from: illumos
MFC after: 1 week
The only thing this tunable enables now is reporting to ACPI _OSC that
Active State Power Management and Clock Power Management Capability are
"supported" by the OS.
I've found that at least some Supermicro server boards do not allow OS
to support native PCIe hot-plug unless it reports those capabilities.
After spending significant time in PCIe specs I have found very little
motivation for that, and none of it applies to those motherboards, not
enabling ASPM themselves. So unless OS explicitly wants to save power,
I see nothing for it to do there actually.
I guess it may get sense to support ASPM when we get Thunderbolt support.
Otherwise I have no system with PCIe hot-plug where power saving matters.
It would be nice to enable this by default, but I worry that it affect
power saving of some laptops, even though I haven't noticed that myself.
Switch to the simplified while loop suggest by Aaron LI
Post commit review via: https://reviews.freebsd.org/rS301185#inline-232
Submitted by: Aaron LI <aly@aaronly.me>
Sponsored by: Klara Inc.
If the interfaces on which wpa_supplicant is to run are not known or do
not exist, wpa_supplicant can match an interface when it arrives. Each
matched interface is separated with -M argument and the -i argument now
allows for pattern matching.
As an example, the following command would start wpa_supplicant for a
specific wired interface called lan0, any interface starting with wlan
and lastly any other interface. Each match has its own configuration
file, and for the wired interface a specific driver has also been given.
wpa_supplicant \
-M -c wpa_wired.conf -ilan0 -D wired \
-M -c wpa1.conf -iwlan* \
-M -c wpa2.conf
PR: 247177
Reported by: greg@unrelenting.technology
MFC after: 1 month
Related to: ports r540412
Not all interrupt sources that affect CIS bit were acknowledged.
Specifically, bits in STATESTS (aka WAKESTS) were left set.
The fix is to disable WAKEEN and clear STATESTS bits before the HDA
interrupt is enabled. This way we should never get any STATESTS bits.
I also added placeholders for all event bits that we currently do not
enable, do not handle and do not clear. This might get useful when / if
we enable any of them.
Reported by: kib (Apollo Lake hardware)
Tested by: kib (earlier, different change)
MFC after: 2 weeks
X-MFC with: r362294
The TRB processing loop could potentially call a back-end twice
with the same status transaction. While this was generally benign,
some code paths in the tablet backend weren't set up to handle
this case, resulting in a NULL dereference.
Fix by
- returning a STALL error when an invalid request was seen in the backend
- skipping a call to the backend if the number of packets in a status
transaction was zero (this code fragment was taken from the Intel ACRN
xhci backend)
PR: 246964
Reported by: Ali Abdallah
Discussed with: Leon Dang (author)
Reviewed by: jhb (#bhyve), Leon Dang
Approved by: jhb
Obtained from: Intel ACRN (partially)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25228
The logging was introduced in r314527 but doesn't appear to be useful
for regular operation, and as the result, for users with no class set
(very common) the administrator would see a message like this in their
auth.log:
sshd[44251]: user root login class [preauth]
(note that the class was "" because that's what's typically configured
for most users; we would get 'default' if lc->lc_class is chosen)
Remove this log as it can be annoying as the lookup happen before
authentication and repeats, and our code is not acting upon lc_class
or pw_class directly anyways.
Reviewed by: cem, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24997
should be used.
For KERN_TLS (and possibly some other future network interface) the mbuf
list passed into sosend() must be ext_pgs mbufs. The krpc could simply
copy all the mbuf data into ext_pgs mbufs before calling sosend(), but
that would be inefficient for large RPC messages.
This patch adds an argument to nfscl_reqstart() to indicate that it should
fill the RPC message into ext_pgs mbufs.
It also adds fields to "struct nfsrv_descript" needed for building NFS RPC
messages in ext_pgs mbufs, along with new flags for this.
Since the argument is always "false", this commit should not result in any
semantic change. However, this commit prepares the code
for future commits that will add support for building of NFS RPC messages
in ext_pgs mbufs.
- Move temporary sglists into the session structure and protect them
with a per-session lock instead of a per-adapter lock.
- Retire an unused session field, and move a debugging field under
INVARIANTS to avoid using the session lock for completion handling
when INVARIANTS isn't enabled.
- Use counter_u64 for per-adapter statistics.
Note that this helps for cases where multiple sessions are used
(e.g. multiple IPsec SAs or multiple KTLS connections). It does not
help for workloads that use a single session (e.g. a single GELI
volume).
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25457
- Rename from the teardown callback from 'zeroize' to 'cleanup' since
this no longer zeroes keys.
- Change the callback return type to void. Nothing checked the return
value and it was always zero.
- Don't have esp call into ah since it no longer needs to depend on
this to clear the auth key. Instead, both are now private and
self-contained.
Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25443
When an IPsec packet has been encrypted or decrypted, the next step in
the packet's traversal through the network stack is invoked from a
crypto worker thread, not from the original calling thread. These
threads need to enter the network epoch before passing packets down to
IP output routines or up to transport protocols.
Reviewed by: ae
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25444
CAP_EVENT was omitted on pidfiles (in
pidfile_open()). There seems no reason why a process that creates
and writes a pidfile cannot monitor events on that file. This mod adds
the capability.
Reviewed by: cem@
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D25363
Linux MADV_DONTNEED is not advisory: it has side effects for anonymous
memory, and some system software depends on that. In particular,
MADV_DONTNEED causes anonymous pages to be discarded. If the mapping is
a private mapping of a named object then subsequent faults are to
repopulate the range from that object, otherwise pages will be
zero-filled. For mappings of non-anonymous objects, Linux MADV_DONTNEED
can be implemented in the same way as our MADV_DONTNEED.
This implementation differs from Linux semantics in its handling of
private mappings, inherited through fork(), of non-anonymous objects.
After applying MADV_DONTNEED, subsequent faults will repopulate the
mapping from the parent object rather than the root of the shadow chain.
PR: 230160
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25330
These bzero's should have been explicit_bzero's.
Reviewed by: cem, delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25437
In addition to reducing lines of code, this also ensures that the full
allocation is always zeroed avoiding possible bugs with incorrect
lengths passed to explicit_bzero().
Suggested by: cem
Reviewed by: cem, delphij
Approved by: csprng (cem)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25435
It seems this manpage was copied from kvm_getloadavg(3), but the
DIAGNOSTICS section was not updated completely. Update the section with
correct information about a return value of -1.
MFC after: 3 days
This define caused a couple of symbols to disappear. To keep ABI
compatibility, we are going to keep the symbols exposed, but leave SSLv3 as
not in the default config (this is what OPENSSL_NO_SSL3 achieves). The
ramifications of this is an application can still use SSLv3 if it
specifically calls the SSLv3_method family of APIs.
Reported by: kib, others
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25451
Otherwise out-of-tree module builds will be broken for a lack of a
definition of MK_SCTP_SUPPORT.
Reported by: Michael Butler <imb@protected-networks.net>
MFC with: r362614
Sponsored by: The FreeBSD Foundation
color of a node (or, really, the color of the link from the parent to
the node) by using one of the last two bits of the parent pointer in
that parent node. Adjust rebalancing methods to account for where
colors are stored, and the fact that null children have a color too.
Adjust RB_PARENT and RB_SET_PARENT to account for this change.
Reviewed by: markj
Tested by: pho, hselasky
Differential Revision: https://reviews.freebsd.org/D25418
There were quite a few places where port_info was being accessed only to
get to the adapter.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25432
* Add four examples showing flags -e, -b, -d, -s
* Remove extra space at the end of the line reported by igor
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25426
All vm_object_page_remove() callers, except
linux_invalidate_mapping_pages() in the LinuxKPI, free swap space when
removing a range of pages from an object. The LinuxKPI case appears to
be an unintentional omission that could result in leaked swap blocks, so
unconditionally free swap space in vm_object_page_remove() to protect
against similar bugs in the future.
Reviewed by: alc, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25329
Introduce -D flag that allows for the VM to be destroyed on guest initiated
power-off by the bhyve(8) process itself.
This is quality of life change that allows for simpler deployments without
the need for bhyvectl --destroy.
Requested by: swills
Reviewed by: 0mp (manpages), grehan, kib, swills
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25414