the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
This includes decodes of recent Intel instructions, in particular
VT-x and related instructions. This allows the FBT provider to
locate the exit points of routines that include these new
instructions.
Illumos issues:
3414 Need a new word of AT_SUN_HWCAP bits
3415 Add isainfo support for f16c and rdrand
3416 Need disassembler support for rdrand and f16c
3413 isainfo -v overflows 80 columns
3417 mdb disassembler confuses rdtscp for invlpg
1518 dis should support AMD SVM/AMD-V/Pacifica instructions
1096 i386 disassembler should understand complex nops
1362 add kvmstat for monitoring of KVM statistics
1363 add vmregs[] variable to DTrace
1364 need disassembler support for VMX instructions
1365 mdb needs 16-bit disassembler support
This corresponds to Illumos-gate (github) version
eb23829ff08a873c612ac45d191d559394b4b408
Reviewed by: markj
MFC after: 1 week
with all bits set to 1 beyond the I/O permission bitmap.
Prior to this change accessing I/O ports [0xFFF8-0xFFFF] would trigger a
#GP fault even though the I/O bitmap allowed access to those ports.
For more details see section "I/O Permission Bit Map" in the Intel SDM, Vol 1.
Reviewed by: kib
Here, "suitably endowed" means that the System Control Coprocessor
(#15) has Performance Monitoring Registers, including a CCNT (Cycle
Count) register.
The CCNT register is used in a way similar to the TSC register in
x86 processors by the get_cyclecount(9) function. The entropy-harvesting
thread is a heavy user of this function, and will benefit from not
having to call binuptime(9) instead.
One problem with the CCNT register is that it is 32-bit only, so
the upper 32-bits of the returned number are always 0. The entropy
harvester does not care, but in case any one else does, follow-up
work may include an interrup trap to increment an upper-32-bit
counter on CCNT overflow.
Another problem is that the CCNT register is not readable in user-mode
code; in can be made readable by userland, but then it is also
writable, and so is a good chunk of the PMU system. For that reason,
the CCNT is not enabled for user-mode access in this commit.
Like the x86, there is one CCNT per core, so they don't all run in
perfect sync.
Reviewed by: ian@ (an earlier version)
Tested by: ian@ (same earlier version)
Committed from: WANDBOARD-QUAD
audio device driver is detached first and not its children. This fixes
a panic in some cases when unloading "snd_uaudio" while a USB device
is plugged. The linking order affects the order in which the module
dependencies are registered.
MFC after: 1 week
parent and child processes. Previously, we copied these pages even though
they are read only. However, the reason for copying them is historical and
no longer exists. In recent times, vm_map_protect() has developed the
ability to copy pages when write access is added to wired copy-on-write
pages. So, in this case, copy-on-write sharing of wired pages is not to be
feared. It is not going to lead to copy-on-write faults on wired memory.
Reviewed by: kib
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Previously only TX IP checksum offloading was disabled but it's
reported that TX checksum offloading for UDP datagrams with IP
options also generates corrupted frames. Reporter's controller is
RTL8168CP but I guess RTL8168C also have the same issue since it
shall share the same core.
Reported and tested by: tuexen
that and the need to be in a critical section when switching to idleclock
mode for event timers, use spinlock_enter()/exit() to achieve both needs.
The ARM WFI (wait for interrupt) instruction blocks until an interrupt is
asserted, and it will unblock even if interrupts are masked, and it will
unblock immediately if an interrupt is already pending. It is necessary
to execute it with interrupts disabled, otherwise the interrupt that
should unblock it may occur and be serviced just prior to executing the
instruction. At that point the system is inappropriately asleep until
the next timer tick or some other random interrupt happens.
In general, interrupts need to be disabled continuously from the time the
decision is made that there is no work to be done and sleeping is needed
until actually going to sleep, to avoid a race where handling a new
interrupt changes the basis for deciding there is no work to be done.
Submitted by: hps@ (in slightly different form)
1. Make sure IPI mask is set before sending the IPI
2. Operate atomically on PS3 PIC outstanding interrupt list
3. Make sure IPIs are EOI'ed before, not after, processing. Without this,
a second IPI could be sent partway through processing the first one,
get erroneously acknowledge by the EOI to the first, and be lost. In
particular in the case of smp_rendezvous(), this can be fatal.
In combination, this makes the PS3 boot SMP again. It probably also fixes
some latent bugs elsewhere.
MFC after: 2 weeks
does an out-of-tree build without setting MAKESYSPATH) and recently
added requirements (JIRA's building the modules in a non-standard
layout). So, when MAKESYSPATH is defined, trust that it will do the
right thing (to catch the JIRA use case). When it isn't defined,
assume a standard FreeBSD tree and reach over to grab bsd.mkopt.mk (to
fix the /usr/ports use case). Both camps cannot be appeased otherwise,
so we have this kludge until it can be sorted out.
If the underlying protocol reported an error (e.g. because a connection was
closed while waiting in the queue), this error was also indicated by
returning a zero-length address. For all other kinds of errors (e.g.
[EAGAIN], [ENFILE], [EMFILE]), *addrlen is unmodified and there are
successful cases where a zero-length address is returned (e.g. a connection
from an unbound Unix-domain socket), so this error indication is not
reliable.
As reported in Austin Group bug #836, modifying *addrlen on error may cause
subtle bugs if applications retry the call without resetting *addrlen.
avoid soft page faults when adding write access to user wired entries in
vm_map_protect(). Previously, we only avoided the soft page fault when
the underlying pages were copy-on-write. In other words, we avoided the
pages faults that might sleep on page allocation, but not the trivial
page faults to update the physical map.
Reviewed by: kib
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
multiuser again (this commit comes from the PS3 itself). Some problems
still exist with SMP, apparently, as I had to boot a non-SMP kernel to
get here.
or __POSIX_VISIBLE.
Whenever <sys/cdefs.h> sets __BSD_VISIBLE to non-zero, it also sets
__POSIX_VISIBLE and __XSI_VISIBLE to the newest version supported.
No functional change is intended.
running at, guess the nearest value instead of looking for a value within
25 MHz of the observed frequency.
Prior to this change, if a system booted with Intel Turbo Boost enabled,
the dev.cpu.0.freq sysctl is nonfunctional, since the ACPI-reported
frequency for Turbo Boost states does not match the actual clock frequency
(and thus no levels are within 25 MHz of the observed frequency) and the
current performance level is read before a new level is set.
MFC after: 3 days
Relnotes: Bug fix in power management on CPUs with Intel Turbo Boost
the main processing queue, clear the NAK counter for any associated
BULK or CONTROL transfers and poll the endpoint(s) for 1 millisecond
at 125us rate interval, before going into slow, 10ms, NAK polling mode
again. This has the effect that typical ping-ping protocols respond
quicker when initiated from the USB host.
MFC after: 2 weeks
GENERIC64 for PowerPC to use vt with it.
Much to my chagrin, PS3 support seems to have bitrotted somewhat since the
last time I tried it. ehci panics on attach and interrupt handling seems
to be faulty. This should be fixed soon...
On modern ARM SoCs the L2 cache controller sits between the CPU and the
AXI bus, and most on-chip memory-mapped devices are on the AXI bus. We
map the device registers using the 'Device' memory attribute, which means
the memory is not cached, but writes to it are buffered. Ensuring that a
write has made it all the way to a device may require that the L2
controller take some action.
There is currently only one implementation of the new function, for the
PL310 cache controller. It invokes a function that the controller
manual calls "cache sync" but it actually has nothing to do with cache at
all, it triggers a drain of all pending store buffer writes and it blocks
until they complete.
The sheeva and xscale L2 controllers (which predate the concept of Device
memory) don't seem to have a corresponding function. It appears that the
standard armv5 drain_writebuf function includes draining all the way
through the L2 controller.
The last obstacle to switching PowerPC entirely to vt is that the Playstation 3
framebuffer driver needs to be ported over. This only applies for powerpc64,
however.
on my G4 iBook by more than half. Still 10% slower than syscons, but that's
much better than a factor of 2.
The slowness had to do with pathological write performance on 8-bit
framebuffers, which are almost universally used on Open Firmware systems.
Writing 1 byte at a time, potentially nonconsecutively, resulted in many
extra PCI write cycles. This patch, in the common case where it's writing
one or several characters in an 8x8 font, gangs the writes together into
a set of 32-bit writes. This is a port of r143830 to vt(4).
The EFI framebuffer is also extremely slow, probably for the same reason,
and the same patch will likely help there.
