falloc_noinstall() followed by finstall() allows you to create and
install file descriptors with custom capabilities. Add falloc_caps()
that can do both of these actions in one go.
This will be used by CloudABI to create pipes with custom capabilities.
Reviewed by: mjg
ip_encap already has inspected mbuf's data, at least an IP header.
And it is safe to use mtod() and do direct access to needed fields.
Add M_ASSERTPKTHDR() to gif_encapcheck(), since the code expects that
mbuf has a packet header.
Move the code from gif_validate[46] into in[6]_gif_encapcheck(), also
remove "martian filters" checks. According to RFC 4213 it is enough to
verify that the source address is the address of the encapsulator, as
configured on the decapsulator.
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
CloudABI's openat() ensures that files are opened with the smallest set
of relevant rights. For example, when opening a FIFO, unrelated rights
like CAP_RECV are automatically removed. To remove unrelated rights, we
can just reuse the code for this that was already present in the rights
conversion function.
Limit the number of supported device IDs to 0x100000
in order to decrease the size of the ITS device table so
that it matches with the HW capabilities.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3131
Skip checks for IPv6 multicast addresses.
Use in6_localip() for global unicast.
And for IPv6 link-local addresses do search in the IPv6 addresses list.
Since LLA are stored in the kernel internal form, use
IN6_ARE_MASKED_ADDR_EQUAL() macro with lla_mask for addresses comparison.
lla_mask has zero bits in the second word, where we keep sin6_scope_id.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Both are used to protect access to IP addresses lists and they can be
acquired for reading several times per packet. To reduce lock contention
it is better to use rmlock here.
Reviewed by: gnn (previous version)
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3149
problems that was introduced in r285336... I have verified that
HMAC-SHA2-256 both ah only and w/ AES-CBC interoperate w/ a NetBSD
6.1.5 vm...
Reviewed by: gnn
When we allocate the struct pf_fragment in pf_fillup_fragment() we forgot to
initialise the fr_flags field. As a result we sometimes mistakenly thought the
fragment to not be a buffered fragment. This resulted in panics because we'd end
up freeing the pf_fragment but not removing it from V_pf_fragqueue (believing it
to be part of V_pf_cachequeue).
The next time we iterated V_pf_fragqueue we'd use a freed object and panic.
While here also fix a pf_fragment use after free in pf_normalize_ip().
pf_reassemble() frees the pf_fragment, so we can't use it any more.
PR: 201879, 201932
MFC after: 5 days
Summary:
CloudABI's readdir() system call could be thought of as a mixture
between FreeBSD's getdents(2) and pread(). Instead of using the file
descriptor offset, userspace provides a 64-bit cloudabi_dircookie_t
continue reading at a given point. CLOUDABI_DIRCOOKIE_START, having
value 0, can be used to return entries at the start of the directory.
The file descriptor offset is not used to store the cookie for the
reason that in a file descriptor centric environment, it would make
sense to allow concurrent use of a single file descriptor.
The remaining space returned by the system call should be filled with a
partially truncated copy of the next entry. The advantage of doing this
is that it gracefully deals with long filenames. If the C library
provides a buffer that is too small to hold a single entry, it can still
extract the directory entry header, meaning that it can retry the read
with a larger buffer or skip it using the cookie.
Test Plan:
This implementation passes the cloudlibc unit tests at:
https://github.com/NuxiNL/cloudlibc/tree/master/src/libc/dirent
Reviewers: marcel, kib
Reviewed By: kib
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3226
'buf' is inconvenient and has lead me to some irritating to discover
bugs over the years. It also makes it more challenging to refactor
the buf allocation system.
- Move swbuf and declare it as an extern in vfs_bio.c. This is still
not perfect but better than it was before.
- Eliminate the unused ffs function that relied on knowledge of the buf
array.
- Move the shutdown code that iterates over the buf array into vfs_bio.c.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
While here, reduce the style diff with Linux.
There is no functional change. The goal is to ease the future update to
Linux 3.8's i915 driver.
MFC after: 2 months
attached to bufs to avoid the overhead of the vm. This purposes is now
better served by vmem. Freeing the kva immediately when a buf is
destroyed leads to lower fragmentation and a much simpler scan algorithm.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
enqueueing the frames when it fails. This way there is some latency
removed from the transmitting path.
- If IFF_DRV_OACTIVE is set (and also if IFF_DRV_RUNNING is not) just
enqueue the desired frames and return successful transmit. This way we
avoid to return errors on transmit side and resulting in
possible out-of-order frames. Please note that IFF_DRV_OACTIVE is set
everytime we get the threshold ring hit, so this can be happening quite
often.
Submitted by: Attilio.Rao@isilon.com
MFC after:5 days
On some platforms, the /cpus node contains cpu-to-cluster
map which deffinitely is not a CPU node. Its presence was
causing incrementing of "id" variable and reporting more
CPUs available than it should.
To make "id" valid, increment it only when an entry really
is a CPU device.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3216
CloudABI uses a system call interface to modify file attributes that is
more similar to KPI's/FUSE, namely where a stat structure is passed back
to the kernel, together with a bitmask of attributes that should be
changed. This would allow us to update any set of attributes atomically.
That said, I'd rather not go as far as to actually implement it that
way, as it would require us to duplicate more code than strictly needed.
Let's just stick to the combinations that are actually used by
cloudlibc.
Obtained from: https://github.com/NuxiNL/freebsd
As ZFS requires a more kernel stack pages than is the default on some
architectures e.g. i386, warn if KSTACK_PAGES is less than
ZFS_MIN_KSTACK_PAGES (which is 4 at the time of writing).
MFC after: 3 days
Sponsored by: Multiplay
Remove NAKing limit and pause IN and OUT transactions for 125us in
case of NAK response for BULK and CONTROL endpoints. This gets the
receive latency down and improves USB network throughput at the cost
of some CPU usage.
MFC after: 1 month
ordering semantic of x86 CPUs makes only the compiler barrier
neccessary to give the acquire behaviour.
Existing implementation ensured sequentially consistent semantic for
load_acq, making much stronger guarantee than required by standard's
definition of the load acquire. Consumers which depend on the barrier
are believed to be identified and already fixed to use proper
operations.
Noted by: alc (long time ago)
Reviewed by: alc, bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
sosend(). The only release on the xp_snt_cnt is done after sosend(),
with an intent to synchronize with load_acq in svc_vc_ack().
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The file_create() system call can be used to create files of a given
type. Right now it can only be used to create directories and FIFOs. As
CloudABI does not expose filesystem permissions, this system call lacks
a mode argument. Simply use 0777 or 0666 depending on the file type.
Summary:
CloudABI provides access to two different stat structures:
- fdstat, containing file descriptor level status: oflags, file
descriptor type and Capsicum rights, used by cap_rights_get(),
fcntl(F_GETFL), getsockopt(SO_TYPE).
- filestat, containing your regular file status: timestamps, inode
number, used by fstat().
Unlike FreeBSD's stat::st_mode, CloudABI file descriptor types don't
have overloaded meanings (e.g., returning S_ISCHR() for kqueues). Add a
utility function to extract the type of a file descriptor accurately.
CloudABI does not work with O_ACCMODEs. File descriptors have two sets
of Capsicum-style rights: rights that apply to the file descriptor
itself ('base') and rights that apply to any new file descriptors
yielded through openat() ('inheriting'). Though not perfect, we can
pretty safely decompose Capsicum rights to such a pair. This is done in
convert_capabilities().
Test Plan: Tests for these system calls are fairly extensive in cloudlibc.
Reviewers: jonathan, mjg, #manpages
Reviewed By: mjg
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3171
xhci_start_controller() to xhci_init(). These values don't change at run-
time so there's no point of acquiring them on every USB_HW_POWER_RESUME
instead of only once during initialization. In r276717, reading the first
couple of registers in question already had been moved as a prerequisite
for the changes in that revision.
- Identify ASMedia ASM1042A controllers.
- Use NULL instead of 0 for pointers.
MFC after: 3 days
Summary:
Back in 2005, maxim@ attempted to fix shutdown() to return ENOTCONN in case the socket was not connected (r150152). This had to be rolled back (r150155), as it broke some of the existing programs that depend on this behavior. I reapplied this change on my system and indeed, syslogd failed to start up. I fixed this back in February (279016) and MFC'ed it to the supported stable branches. Apart from that, things seem to work out all right.
Since at least Linux and Mac OS X do the right thing, I'd like to go ahead and give this another try. To keep old copies of syslogd working, only start returning ENOTCONN for recent binaries.
I took a look at the XNU sources and they seem to test against both SS_ISCONNECTED, SS_ISCONNECTING and SS_ISDISCONNECTING, instead of just SS_ISCONNECTED. That seams reasonable, so let's do the same.
Test Plan:
This issue was uncovered while writing tests for shutdown() in CloudABI:
https://github.com/NuxiNL/cloudlibc/blob/master/src/libc/sys/socket/shutdown_test.c#L26
Reviewers: glebius, rwatson, #manpages, gnn, #network
Reviewed By: gnn, #network
Subscribers: bms, mjg, imp
Differential Revision: https://reviews.freebsd.org/D3039
variant of Microsoft RNDIS, i. e. their unofficial version of CDC ACM,
has been disabled in r261544 for resolving a conflict with umodem(4).
Eventually, in r275790 that problem was dealt with in the right way.
However, r275790 failed to put probing of RNDIS devices in question
back.
- Initialize the device prior to querying it, as required by the RNDIS
specification. Otherwise already determining the MAC address may fail
rightfully.
- On detach, halt the device again.
- Use UCDC_SEND_ENCAPSULATED_{COMMAND,RESPONSE}. While these macros are
resolving to the same values as UR_{CLEAR_FEATURE,GET_STATUS}, the
former set is way more appropriate in this context.
- Report unknown - rather: unimplemented - events unconditionally and
not just in debug mode. This ensures that we'll get some hint of what
is going wrong instead of the driver silently failing.
- Deal with the Microsoft ActiveSync requirement of using an input buffer
the size of the expected reply or larger - except for variably sized
replies - when querying a device.
- Fix some pointless NULL checks, style bugs etc.
This changes allow urndis(4) to communicate with a Microsoft-certified
USB RNDIS test token.
MFC after: 3 days
Sponsored by: genua mbh
Summary:
CloudABI provides two different types of futex objects: read-write locks
and condition variables. There is no need to provide separate support
for once objects and thread joining, as these are efficiently simulated
by blocking on a read-write lock. Mutexes simply use read-write locks.
Condition variables always have a lock object associated to them. They
always know to which lock a thread needs to be migrated if woken up.
This allows us to implement requeueing. A broadcast on a condition
variable will never cause multiple threads to be woken up at once. They
will be woken up iteratively.
This implementation still has lots of room for improvement. Locking is
coarse and right now we use linked lists to store all of the locks and
condition variables, instead of using a hash table. The primary goal of
this implementation was to behave correctly. Performance will be
improved as we go.
Test Plan:
This futex implementation has been in use for the last couple of months
and seems to work pretty well. All of the cloudlibc and libc++ unit
tests seem to pass.
Reviewers: dchagin, kib, vangyzen
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3148
Futex object scopes have been renamed from using their own constants to
simply reusing the existing CLOUDABI_MAP_{PRIVATE,SHARED} flags, as they
are more accurate in this context.
Currently LOCK_DEBUG is always defined in sys/lock.h (0 or 1).
This means that debugging code always built. In addition the kernel
modules have always defined LOCK_DEBUG as 1. So, debugging rmlock code
is always used by kernel modules.
MFC after: 1 week
determining whether a node changed.
Other filesystems, e.g., UFS, only check on seconds, when determining
whether something changed.
This also corrects the birthtime case, where we checked tv_nsec
twice, instead of tv_sec and tv_nsec (PR).
PR: 201284
Submitted by: David Binderman
Patch suggested by: kib
Reviewed by: kib
MFC after: 2 weeks
Committed from: Essen FreeBSD Hackathon
