the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().
Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.
Discussed with: rwatson
Reviewed by: rwatson (version before review requested changes)
MFC after: 4 weeks (set the timer and see then)
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
IPsec change in r185366 only differed in two additonal IPv6 lines.
Rather than splattering conditional code everywhere add the v6
check centrally at this single place.
Reviewed by: rwatson (as part of a larger changset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
Ignoring different names because of macros (in6pcb, in6p_sp) and
inp vs. in6p variable name both functions were entirely identical.
Reviewed by: rwatson (as part of a larger changeset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrappers in 7 to keep the symbols.
as in_pcbdetach() and we don't need the code twice.
Reviewed by: rwatson
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
This means that inp_cred is always there, even after the socket
has gone away. It also means that it is constant for the lifetime
of the inp.
Both facts lead to simpler code and possibly less locking.
Suggested by: rwatson
Reviewed by: rwatson
MFC after: 6 weeks
X-MFC Note: use a inp_pspare for inp_cred
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
destroy call; this transpired because the inpcb alloc path for IPv4/IPv6
is the same code, but IPv6 has a separate free path. The results was
that as new IPv6 TCP connections were created, kernel memory would
gradually leak.
MFC after: 3 days
Reported by: tanyong <tanyong at ercist dot iscas dot ac dot cn>,
zhouzhouyi
This commit includes only the kernel files, the rest of the files
will follow in a second commit.
Reviewed by: bz
Approved by: re
Supported by: Secure Computing
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
protocol entry points using functions named proto_getsockaddr and
proto_getpeeraddr rather than proto_setsockaddr and proto_setpeeraddr.
While it's true that sockaddrs are allocated and set, the net effect is
to retrieve (get) the socket address or peer address from a socket, not
set it, so align names to that intent.
consistent with the naming of other structure field members, and
reducing improper grep matches. Clean up and comment structure
fields in structure definition.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
( and where appropriate the destruction) of the pcb mutex to the init/finit
functions of the pcb zones.
This allows locking of the pcb entries and race condition free comparison
of the generation count.
Rearrange locking a bit to avoid extra locking operation to update the generation
count in in_pcballoc(). (in_pcballoc now returns the pcb locked)
I am planning to convert pcb list handling from a type safe to a reference count
model soon. ( As this allows really freeing the PCBs)
Reviewed by: rwatson@, mohans@
MFC after: 1 week
even if we're going to return an argument-based error.
Assert pcbinfo lock in in6_pcblookup_local(), in6_pcblookup_hash(), since
they walk pcbinfo inpcb lists.
Assert inpcb and pcbinfo locks in in6_pcbsetport(), since
port reservations are changing.
MFC after: 3 months
list head structure; this improves congruence to IPv4, and also allows
in6_pcbpurgeif0() to lock the pcbinfo. Modify in6_pcbpurgeif0() to lock
the pcbinfo before iterating the pcb list, use queue(9)'s LIST_FOREACH()
for the iteration, and to lock individual inpcb's while manipulating
them.
MFC after: 3 months
- in_pcbdetach(), which removes the link between an inpcb and its
socket.
- in_pcbfree(), which frees a detached pcb.
Unlike the previous in_pcbdetach(), neither of these functions will
attempt to conditionally free the socket, as they are responsible only
for managing in_pcb memory. Mirror these changes into in6_pcbdetach()
by breaking it into in6_pcbdetach() and in6_pcbfree().
While here, eliminate undesired checks for NULL inpcb pointers in
sockets, as we will now have as an invariant that sockets will always
have valid so_pcb pointers.
MFC after: 3 months
net.inet.ip.portrange.reservedlow apply to IPv6 aswell as IPv4.
We could have made new sysctls for IPv6, but that potentially makes
things complicated for mapped addresses. This seems like the least
confusing option and least likely to cause obscure problems in the
future.
This change makes the mac_portacl module useful with IPv6 apps.
Reviewed by: ume
MFC after: 1 month
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME
(sorele()/sotryfree()):
- This permits the caller to acquire the accept mutex before the socket
mutex, avoiding sofree() having to drop the socket mutex and re-order,
which could lead to races permitting more than one thread to enter
sofree() after a socket is ready to be free'd.
- This also covers clearing of the so_pcb weak socket reference from
the protocol to the socket, preventing races in clearing and
evaluation of the reference such that sofree() might be called more
than once on the same socket.
This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket. The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets. The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.
RELENG_5_3 candidate.
MFC after: 3 days
Reviewed by: dwhite
Discussed with: gnn, dwhite, green
Reported by: Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by: Vlad <marchenko at gmail dot com>
result of the notify() function to decide if we need to unlock the
in6pcb or not, rather than always unlocking. Otherwise, we may unlock
and already unlocked in6pcb.
Reported by: kuriyama, Gordon Bergling <gbergling at 0xfce3.net>
Tested by: kuriyama, Gordon Bergling <gbergling at 0xfce3.net>
Discussed with: mdodd
have already done this, so I have styled the patch on their work:
1) introduce a ip_newid() static inline function that checks
the sysctl and then decides if it should return a sequential
or random IP ID.
2) named the sysctl net.inet.ip.random_id
3) IPv6 flow IDs and fragment IDs are now always random.
Flow IDs and frag IDs are significantly less common in the
IPv6 world (ie. rarely generated per-packet), so there should
be smaller performance concerns.
The sysctl defaults to 0 (sequential IP IDs).
Reviewed by: andre, silby, mlaier, ume
Based on: NetBSD
MFC after: 2 months
structures, allowing in6_pcbnotify() to lock the pcbinfo and each
inpcb that it notifies of ICMPv6 events. This prevents inpcb
assertions from firing when IPv6 generates and delievers event
notifications for inpcbs.
Reported by: kuriyama
Tested by: kuriyama
