Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Do not use macros in the -width of a .Bl, since mandoc does not support them.
Fix issues reported by igor and mandoc -Tlint.
Use a .Bl for list of clock IDs instead of a comma list.
MFC after: 3 days
Sponsored by: Dell EMC
Add notes to each of these that specifically state that results are
undefined if the strings overlap. In the case of memcpy, we document
the overlapping behavior on FreeBSD (pre-existing). For str*, it is
left unspecified, however, since the default (and x86) implementations
do not handle overlapping strings properly.
PR: 223653
Sponsored by: Netflix
As of r325320 posix_fallocate returns EINVAL on ZFS to indicate that
the underlying filesystem does not support this operation, per
POSIX.1-2008. Document this case in the man page.
MFC after: 20 days
MFC with: r325320
Sponsored by: The FreeBSD Foundation
For statically linked binaries, where all relocation are solved by static
linker, the linker expect that offset to TLS section is aligned. Additionaly,
to maintain absolute alignment, TLS TCB should by also aligned.
Obtained from: CheriBSD (initial version)
MFC after: 1 month
Reviewed by: brooks (previous version), kib
Differential Revision: https://reviews.freebsd.org/D12907
{}'s around the if (c == EOF) block to prevent potential 'trailing else'
issues from being introduced when refactoring. As my gets_s() code
is based on this, it makes sense to fix the same issue here first
here and now, then do an svn copy again to capture this history).
Suggested by: ed@ in D12785
The bug is an out-of-bounds read detected with address sanitizer that
happens when 'sp' in p_b_coll_elems() includes NUL byte[s], e.g. if it's
equal to "GS\x00". In that case len will be equal to 4, and the
strncmp(cp->name, sp, len) call will succeed when cp->name is "GS" but the
cp->name[len] == '\0' comparison will cause the read to go out-of-bounds.
Checking the length using strlen() instead eliminates the issue.
The bug was found in LLVM with oss-fuzz:
https://reviews.llvm.org/D39380
MFC after: 1 week
Obtained from: Vlad Tsyrklevich through posting on openbsd-tech
RB_POWERCYCLE instructs the platform to power off and then power back
on a short time later, if that's possible. Otherwise, degrade to the
RB_POWEROFF behavior.
Sponsored by: Netflix
In r322258 I made p1003_1b.aio_listio_max a tunable. However, further
investigation shows that there was never any good reason for that limit to
exist in the first place. It's used in two completely different ways:
* To size a UMA zone, which globally limits the number of concurrent
aio_suspend calls.
* To artifically limit the number of operations in a single lio_listio call.
There doesn't seem to be any memory allocation associated with this limit.
This change does two things:
* Properly names aio_suspend's UMA zone, and sizes it based on a new constant.
* Eliminates the artifical restriction on lio_listio. Instead, lio_listio
calls will now be limited by the more generous max_aio_queue_per_proc. The
old p1003_1b.aio_listio_max is now an alias for
vfs.aio.max_aio_queue_per_proc, so sysconf(3) will still work with
_SC_AIO_LISTIO_MAX.
Reported by: bde
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12120
one call to sysctl(2) from jemalloc startup code. (That also requires
changes to jemalloc, but I plan to push those to upstream first.)
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12745
- Teach elf aux vector functions about newly added AT_HWCAP and AT_HWCAP2
vectors.
- Export _elf_aux_info() as new public libc function elf_aux_info(3)
The elf_aux_info(3) should be considered as FreeBSD counterpart of glibc
getauxval() with more robust interface.
Note:
We cannot name this new function as getauxval(), with glibc compatible
interface. Some ports autodetect its existence and then expects that all
Linux specific AT_<*> vectors are defined and implemented.
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D12743
In FreeBSD 11 and later debug.iosize_max_clamp defaults to 0, and the
maximum nbytes count for write(2) is SSIZE_MAX. Update the man page to
document this, and mention the sysctl that can be set to obtain the
previous behaviour.
PR: 196666
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
posix_fallocate is logically equivalent to writing zero blocks to the
desired file size and there is no reason to prevent calling it in
capability mode. posix_fallocate already checked for the CAP_WRITE
right, so we merely need to list it in capabilities.conf.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12640
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
On Variant I TLS architectures (aarch64, arm, mips, powerpc, and riscv)
the __libc_allocate_tls function allocates thread local storage memory
with calloc(). It then copies initialization data over the portions with
non-zero initial values. Before this change it would then pointlessly
zero the already zeroed remainder of the storage. Unfortunately the
calculation was wrong and it would zero TLS_TCB_SIZE (2*sizeof(void *))
additional bytes.
In practice, this overflow only matters if the TLS segment is sized such
that calloc() allocates a less than TLS_TCB_SIZE extra memory. Even
then, the likely result will be zeroing part of the next bucket. This
coupled with the impact being confined to Tier II platforms means there
will be no security advisory for this issue.
Reviewed by: kib, dfr
Discussed with: security-officer (delphij)
MFC after: 1 week
Found by: CHERI
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12547
Also fix the style of the asprintf(3) call in __collate_load_tables_l().
Both of these lines were modified away from snprintf(3) during the
import from DragonFly/Illumos.
Reviewed by: jilles (briefly over shoulder)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
After r308212 Capsicum permits .. lookups in capability mode, as long as
path component traversal does not escape the directory corresponding to
the provided file descriptor.
We should add a description of the vfs.lookup_cap_dotdot and
vfs.lookup_cap_dotdot_nonlocal sysctls, perhaps as a cross-reference to
capsicum(4). I intend to look at that soon.
Reviewed by: bjk, cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12343
Illumos and Schillix is adopting some of the locale code and our style(9)
sometimes matches the Solaris cstyle, so the changes are also useful as a
way to reduce diffs.
No functional change.
Discussed with: Joerg Schilling
MFC after: 1 week
getmntinfo(3) is designed around a relatively static or slow growing set of
current mounts. It tried to detect a race with somewhat concurrent mount
and re-call getfsstat(2) in that case, looping indefinitely. It also
allocated space for a single extra mount as slop.
In the case where the user has a large number of mounts and is adding them
at a rapid pace, it fell over.
This patch makes two functional changes:
1. Allocate even more slop. Double whatever the last getfsstat(2) returned.
2. Abort and return some known results after looping a few times
(arbitrarily, 3). If the list is constantly changing, we can't guarantee
we return a full result to the user at any point anyways.
While here, add very basic functional tests for getmntinfo(3) to the libc
suite.
PR: 221743
Submitted by: Peter Eriksson <peter AT ifm.liu.se> (earlier version)
Sponsored by: Dell EMC Isilon
These builtins were listed in the mips-specific Symbol.map for libc but
were not implemented. Compiling mips with recent clang requires these
symbols.
Sponsored by: DARPA / AFRL
instructions, if supported both by CPU and kernel.
Reviewed by: jhb (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12023
lld can successfully link most of a working i386 userland and kernel,
but produces a broken libc. For now if we're otherwise using lld, and
ld.bfd is available, explicitly use it for libc.
Sponsored by: The FreeBSD Foundation
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
On i386 with CPUID but without SSE2, set lfence_works to LMB_NONE
instead of looping.
Reported and tested by: Andre Albsmeier <andre@fbsd.e4m.org>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
S_IRUSR is defined in sys/stat.h
PR: 209229
Submitted by: <mt AT markoturk DOT info>
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D12007
abort_handler_s() currently simply calls abort(), though the standard
specifies more: "Writes an implementation-defined message to stderr
which must include the string pointed to by msg and calls abort()."
memset_s() is missing error condition "n > smax", and does not invoke
the constraint handler after filling the buffer: "following errors are
detected at runtime and call the currently installed constraint
handler function after storing ch in every location of the destination
range [dest, dest+destsz) if dest and destsz are themselves valid",
one of the errors is "n > smax" itself.
Submitted by: Yuri Pankov <yuripv@gmx.com>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11991
