checking the returned oldlen: when ENOMEM is due to the supplied
buffer being too short the return oldlen is equal to buffer size.
Without this additional check sockstat gets stuck in loop leaking the
memory if the returned ENOMEM was due the exceeded memorylocked
limit. This is easily can be observed running `limits -l 1k sockstat'.
Submitted by: Andrey Zonov <andrey zonov org>
MFC after: 1 week
This fixes the bug: when procstat -xa was run and the sysctl for a
process returned ESRCH or EPERM, for this process procstat output the
result collected for the previous successful process.
or resetting USB serial devices.
Somebody[tm] should rewrite tip(1) to use two thread instead of two
processes or maybe even use that new-fangled "select(2)" or positively
futuristic "poll(2)" system call.
- Zero-terminate the resulting string by letting the for-loop copy the
terminating zero.
- Exit the for-loop after handling a backslash at the end of the format
string to fix a buffer overrun.
- Remove some unnecessary comments and blank lines. [1]
Requested by: bde [1]
PR: bin/144722
Approved by: kib (mentor)
Sockets not associated with a file descriptor include TCP TIME_WAIT states
and sockets created via the socket(9) API such as from rpc.lockd and the NFS
client.
PR: bin/164081
MFC after: 2 weeks
No objection: des
- A real filename is now shown in an output report when "-f file" is specified.
- Add Xr lastlogin into last(1) manual page.
Reviewed by: ed
MFC after: 1 week
progress information. The first is that fetch_read() (used in the HTTP
code but not the FTP code) can enter an infinite loop if it has previously
been interrupted by a signal. The second is that when it is interrupted,
fetch_read() will discard any data it may have read up to that point.
Luckily, both bugs are extremely timing-sensitive and therefore difficult
to trigger.
PR: bin/153240
Submitted by: Mark <markjdb@gmail.com>
MFC after: 3 weeks
The wtmpcvt(1) utility converts wtmp files to the new format used by
utmpx(3). Now that HEAD has been branched to stable/9 and 9.0 is
released, there is no need for it in HEAD.
MFC after: never
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
From the NetBSD bug:
The way how hexdump(1) parses escape sequences has some bugs.
It shows up when an escape sequence is used as the non-last character
of a format string.
PR: bin/144722
Submitted by: gcooper
Approved by: rpaulo
Obtained from: NetBSD
MFC after: 1 week
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
This makes a tiny percentage of entries in calendars ugly for latin1
users, but fixes them for UTF-8 users.
This badly needs a solution involving locale-dependent re-encoding.
The following additional vendor revisions are applied:
Revision 3740:
Use archive_clear_error() to clear the error markers.
Obtained from: http://code.google.com/p/libarchive
MFC after: 2 weeks
This matches 4.4BSD tradition and other utilities with these options and is
required by POSIX (POSIX does not specify -P, only -HL).
MFC after: 2 weeks
Whenever the conv_c() function encounters an incomplete multibyte char,
it peeks ahead. It also sets p to peekbuf, to indicate it is still
processing the incomplete character.
However, on the next retry, it compares buf against peekbuf, which
always returns false, since both buf and peekbuf are local char arrays,
whose addresses are never the same.
Fix this by comparing against p instead, which was the intention. Also
turn peekbuf into an array of u_char, to prevent conversion warnings.
MFC after: 1 week
(see tools/regression/usr.bin/make/execution/joberr test).
openpty(fd + 0, fd + 1,...) version does not have this problem but
it sometimes enters an infinite sleep in "ttywait" state in tty_drain()
when make(1) closes slave pty.
As C1X is close to being released, there is no need to wrap around a
feature that is already part of C90. Most of these files already use
`const' in different placed as well.
to Compat_RunCommand() being called with `cmd' that is not on the node->commands
list
- Make ellipsis ("..." command) handling consistent: check for "..." command
in job make after variables expansion to match compat make behavior
- Fix empty command handling (after variables expansion and @+- modifiers
are processed): now empty commands are ignored in compat make and are not
printed in job make case
- Bump MAKE_VERSION to 5-2011-11-30-0
This also fixes the issue, spotted by mdf, with values that were
printed as decimal and had hex prefixes.
Discussed with: kib, rwatson
MFC after: 2 weeks
- fix other errors introduced when committing r226436
- add 'function' to a sentence where it makes sense
Submitted by: delphij
Submitted by: dougb
Submitted by: jhb
Approved by: dougb
Approved by: jhb
- Add ? option to optstring.
- Sort options alphabetically.
- Vertical space.
Tidy up usage() function.
Bring man page in sync with source.
Ensure that debug code is only executed with the -d option.
Submitted by: Christiane Yeardley
Only one of these flags can be set. Just add them together and check the
value. Also, get rid of the listall variable. The code is already filled
with direct *flag-comparisons.
Obtained from: Alexander Best (though modified)
Such optimisations should not be performed in this Makefile. Also, uqs@
suggested they have no effect, because the checksum of the resulting
binary is unchanged.
Discussed with: gabor, uqs
The privs.h header is not only used by at(1), it's also used by
atrun(8). Just let the code the way it used to be (for now).
Reported by: kwm, tinderbox
Hat to: me
Because SEEK_SET is 0, this seems to have no effect on the generated code.
PR: bin/160806
Submitted by: Henning Petersen <henning dot petersen at t-online dot de>
Obtained from: NetBSD
Add birth and death dates for Steve Jobs
Update birth and add death date for Dennis Ritchie
PR: bin/162157
Submitted by: Niclas Zeising <niclas.zeising@gmail.com>
That required to increase the LINE field to fit the output of -b.
While here, change the row() function to take a const argument.
In collaboration with: ed
Even though our implementation of utmpx never emits these types of
records, they are part of POSIX. Do print them when they show up in the
database files.
While there, also print the type number of unsupported records.
ioctlname() to return a pointer to the name rather than print it. This did
not show up in testing because truss had its own prototype for ioctlname(),
so it would build fine and run fine as long as the program being traced did
not issue an ioctl.
Teach mkioctls to generate different versions of ioctlname() based on its
first command-line argument.
Pointed out by: Garrett Cooper <yanegomi@gmail.com>
only logged instances where an operation on a file descriptor required
capabilities which the file descriptor did not have. By adding a type enum
to struct ktr_cap_fail, we can catch other types of capability failures as
well, such as disallowed system calls or attempts to wrap a file descriptor
with more capabilities than it had to begin with.
I focused so much on the 32-bits case where we have to cast SIZE_T_MAX
up in size, that I forgot about the 64-bits case, where off_t and size_t
are equal in size. Simply cast both numbers to uintmax_t, as we can
assume st_size is never negative.
Reported by: cperciva
- Prevent possible unaligned access to struct whoent.
- Increase uptime column by one, to properly print hosts with an uptime
greater than 1000 days.
- Reduce code complexity by storing struct whod inside struct hs.
- Set WARNS to 6.
MFC after: 3 months
Third parties are encouraged to change the license on any files which have
a 4-clause license contributed to the NetBSD Foundation to a 2-clause
license. We would also encourage you to inform us about these files, so
that we can continue to track the many places in which NetBSD is used.
http://www.netbsd.org/about/redistribution.html#why2clause [1]
Requested by: joel@
terminal. Unfortunately the fix was incorrect and for flushtime > 0 it
keept sending VEOF.
Sent VEOF generates ^D\b\b echoed by the terminal, which was reported
in bin/161526. Note, we still send VEOF at least once. Otherwise
commands like below would hang forever:
echo 1 |script /tmp/script.out cat
PR: bin/161526
Reported by: Adrian Wontroba <aw1@stade.co.uk>, Stefan Bethke <stb@lassitu.de>
Tested by: Stefan Bethke <stb@lassitu.de>
MFC after: 3 days
ipfilter headers contain a duplicated function declaration. Turn off
-Werror to allow kdump to compile in spite of this.
It would be neat to be able to turn off -Werror on a file-by-file basis...
PR: bin/161478
Submitted by: Garrett Cooper <yanegomi@gmail.com>
- Allow disabling bzip2 support with WITHOUT_BZIP2
- Fix handling patterns that start with a dot
- Remove superfluous semicolon
Approved by: delphij (mentor)
actually print the name (or the numeric value, if they can't figure out
the correct name) instead of just returning a pointer to it. Also, since
ioctl numbers are not and probably never will be unique, drop support for
using a switch statement instead of an if/else chain.
return value is intentionally ignored, but frankly, all it does is
get in the way of the code.
Also fix a few other incorrect casts, such as (void *)malloc(foo) and
passing signed values to %x.
functions may be wider than int, so use intmax_t throughout. Also
add missing casts in printf() calls.
2) Clean up some of the auto-generated code to improve readability.
3) Auto-generate kdump_subr.h. Note that this requires a semi-ugly hack
in the Makefile to make sure it is generated before make(1) tries to
build kdump.c, or preprocess it for 'make depend'.
MFC after: 3 weeks
backported that was written for the TRE integration project in Google
Summer of Code 2011. This is a temporary solution until the whole
regex library is not replaced so that BSD grep development can continue
and the backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost yet
but several minor bugs have been found and fixed.
Approved by: delphij (mentor)
Sposored by: Google Summer of Code 2011
MFC after: 1 week
are still available on the queue.
Without this, the fixups producer/consumer pipeline will artifically terminate
before all of the fixups have been processed, leading to incomplete updates
and generally quite unhappy users.
Submitted by: mux
As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.
Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):
"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."
This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.
Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).
Import the rest of HID improvements from the branch:
- improve report descriptor parser in libusbhid to handle several kinds of
reports same time;
- add to the libusbhid API two functions wrapping respective kernel IOCTLs
for reading and writing reports;
- tune uhid IOCTL interface to allow reading and writing arbitrary report,
when multiple supported by the device;
- teach usbhidctl to set output and feature reports;
- make usbhidaction support all the same item names as bhidctl.
Sponsored by: iXsystems, inc.
reads eating 100% CPU. Fix this by skipping select on STDIN after
reading EOF -- permanently if STDIN is not terminal and for one second
if it is.
Also after reading EOF from STDIN we have to pass it to the program
being scripted. The previous approach was to write zero bytes into the
pseudo-terminal. This does not work because zero-byte write does not
have any effect on read. Fix this by sending VEOF instead.
Submitted by: Ronald Klop <ronald-freebsd8@klop.yi.org>
Discussed with: kib, Chris Torek <chris.torek@gmail.com>
Approved by: kib
MFC after: 1 week
but the use of fseek() means fetch(1) can't correctly resume a transfer
that was interrupted past the 2 GB mark.
Pointed out by: ache@
MFC after: 3 weeks
in append mode. Open it in read-write mode instead. Also move the
fseek up one level to cover the (unlikely but not impossible) case where
the server accepts ranges but does not send a Content-Size header.
PR: bin/117277
MFC after: 3 weeks
returned by the server matched what we requested, and blindly appended
what we received to what we already had. This could go two ways: if the
delivered offset was higher than expected, the local file would contain
duplicate data, while if it was lower than expected, there would be data
missing from the middle of the file. Furthermore, if the transfer was
interrupted again, each subsequent attempt would compound the error.
Fix the first problem by restarting the transfer from scratch if there
is a gap, and the second by explicitly seeking to the correct location
in the local file so as to overwrite any duplicated data.
PR: bin/117277
Approved by: re (kib)
MFC after: 3 weeks