'struct vm_guest_paging'.
Check for canonical addressing in vmm_gla2gpa() and inject a protection
fault into the guest if a violation is detected.
If the page table walk is restarted in vmm_gla2gpa() then reset 'ptpphys' to
point to the root of the page tables.
the UART FIFO.
The emulation is constrained in a number of ways: 64-bit only, doesn't check
for all exception conditions, limited to i/o ports emulated in userspace.
Some of these constraints will be relaxed in followup commits.
Requested by: grehan
Reviewed by: tychon (partially and a much earlier version)
an embedded newline appearing within the options string surrounded by
double-quotes. Rework the logic that goes into setting dataset options on
the root pool dataset while we're here -- added two new variables (which
can be altered via scripting) ZFSBOOT_POOL_CREATE_OPTIONS and also
ZFSBOOT_BOOT_POOL_CREATE_OPTIONS for setting pool/dataset attributes at
the time of pool creation. The former is for setting options on the root
pool (zroot) and the latter is for setting options on the optional separate
boot pool (bootpool) implicitly enabled when using either GELI or MBR. The
default value for the root pool variable (ZFSBOOT_POOL_CREATE_OPTIONS) is
"-O compress=lz4 -O atime=off" and the default value for separate boot pool
variable (ZFSBOOT_BOOT_POOL_CREATE_OPTIONS) is NULL (no additional options
for the separate boot pool dataset).
Reviewed by: allanjude
MFC after: 7 days
X-MFC-with: r266107-266109
default for newsyslog(8).
The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
install a default configuration to handle their own log files.
MFC after: 2 weeks
Relnotes: yes
In one case generating callgraph output from a 24MB system-wide sampling
data file took 17.4 seconds on average. Profiling showed pmcstat
spending a lot of time in strcmp, due to hash collisions.
Replacing the XOR-only hash with FNV-1a reduces the run time for my
test by 40%.
Replace usage of "prison" with "jail", since that term has mostly dropped
out of use. Note once at the beginning that the "prison" term is equivalent,
but do not use it otherwise. [1]
Some grammar issues.
Some mdoc formatting fixes.
Consistently use \(em for em dashes, with spaces around it.
Avoid contractions.
Prefer ssh to telnet.
PR: docs/176832 [1]
Approved by: hrs (mentor)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
It starts off being used to track the grammar for the number of disks
(singular vs plural) and then it is reused as the list of available disks.
Replace the variable with disks_grammar and move 'disk' and 'disks' to
msg_ vars so they can be translated in the future.
Submitted by: Allan Jude <freebsd@allanjude.com>
Reviewed by: roberto
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Set compress=lz4 for the entire pool, removing it from the individual
datasets
Remove exec=no from /usr/src, breaks the test suite.
Submitted by: Allan Jude <freebsd@allanjude.com>
Reviewed by: roberto
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
encryption for swap, and optional gmirror for swap (which can be combined)
Submitted by: Allan Jude <freebsd@allanjude.com>
Requested By: roberto
Sponsored By: ScaleEngine Inc.
MFC after: 2 weeks
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan
Failing to do this will cause the kevent(2) notification to trigger
continuously and the bhyve(8) mevent thread will hog the cpu until the
characters on the backend tty device are drained.
Also, make the uart backend file descriptor non-blocking to avoid a
select(2) before every byte read from that backend.
Reviewed by: grehan
a 'hostcpu'. The new format of the argument string is "vcpu:hostcpu".
This allows pinning a subset of the vcpus if desired.
It also allows pinning a vcpu to more than a single 'hostcpu'.
Submitted by: novel (initial version)
However, if the original knote had been disabled then it is not automatically
re-enabled.
Fix this by using EV_ADD to create an mevent and EV_ENABLE to enable it.
Adding a kevent for the first time implicitly enables it so existing callers
of mevent_add() don't need to change.
Reviewed by: grehan
because there isn't a standard way to relay this information to the guest OS.
Add a command line option "-Y" to bhyve(8) to inhibit MPtable generation.
If the virtual machine is using PCI devices on buses other than 0 then it can
still use ACPI tables to convey this information to the guest.
Discussed with: grehan@
to sleep permanently by executing a HLT with interrupts disabled.
When this condition is detected the guest with be suspended with a reason of
VM_SUSPEND_HALT and the bhyve(8) process will exit.
Tested by executing "halt" inside a RHEL7-beta guest.
Discussed with: grehan@
Reviewed by: jhb@, tychon@
Omit "too many sections" warnings if the ELF file is not dynamically
linked (and is therefore skipped anyway), and otherwise output it only
once. An errant core file would previously cause kldxref to output a
number of warnings.
Also introduce a MAXSEGS #define and replace literal 2 with it, to make
comparisons clear.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
the 'HLT' instruction. This condition was detected by 'vm_handle_hlt()' and
converted into the SPINDOWN_CPU exitcode . The bhyve(8) process would exit
the vcpu thread in response to a SPINDOWN_CPU and when the last vcpu was
spun down it would reset the virtual machine via vm_suspend(VM_SUSPEND_RESET).
This functionality was broken in r263780 in a way that made it impossible
to kill the bhyve(8) process because it would loop forever in
vm_handle_suspend().
Unbreak this by removing the code to spindown vcpus. Thus a 'halt' from
a Linux guest will appear to be hung but this is consistent with the
behavior on bare metal. The guest can be rebooted by using the bhyvectl
options '--force-reset' or '--force-poweroff'.
Reviewed by: grehan@
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
according to the method outlined in the AHCI spec.
Tested with FreeBSD 9/10/11 with MSI disabled,
and also NetBSD/amd64 (lightly).
Reviewed by: neel, tychon
MFC after: 3 weeks
a sysctl to determine what firmware is in use. This sysctl does not exist
yet, so the following blocks are in front of the wheels:
- I've provisionally called this "hw.platform" after the equivalent thing
on PPC
- The logic to check the sysctl is short-circuited to always choose BIOS.
There's a comment in the top of the file about how to turn this off.
If IA64 acquired a boot1.efifat-like thing (probably with very few
modifications), the same code could be adapted there.
Ignore writes, and return 0xff's, on config accesses when not set.
Behaviour now matches that seen on h/w.
Found with a NetBSD/amd64 guest.
Reviewed by: tychon
MFC after: 3 weeks
GEOM support (thereby adding GEOM support to the disk selection
menu of bsdinstall(8)'s `zfsboot' module updated herein).
MFC after: 1 week
X-MFC-with: 264840
different things from this commit:
+ More devices. Devices that were previously ignored are now present.
+ Faster device scanning. "There is no try, only Do" -- f_device_try()
is no longer the basis of device scanning as GEOM provides [nearly]
all devices (doesn't provide network devices).
+ More information available as non-root. Usually you have to be root
to do things like taste filesystems, and that limits the amount of
information available to non-root users; with GEOM, we see all even
running unprivileged as the brunt of information (except for so-
called ``dangerously dedicated'' file systems) is represented by the
`kern.geom.confxml' sysctl(8) MIB.
NB: Only really useful for external scripts that use the API and run as
non-root; where this code is used in bsdconfig(8) and bsdinstall(8)
you are running as root so can detect even ``dangerously dedicated''
file systems that are not present in GEOM; e.g., no PART class for
a DOS filesystem written directly to disk without partition table).
+ No more use of legacy tools such as diskinfo(8) to get disk capacity
or fdisk(8) to see partitions.
MFC after: 1 week
