In the latest Linux kernel revisions the DSA (Distributed
Switch Architecture) device tree binding was changed.
Instead of the top level dsa@ node, the switch and its
ports is represented as a child node of the mdio bus.
With that other modifications were added, such as
relation with the ethernet port of the SoC. Adjust
e6000sw etherswitch and mvneta drivers to that.
Tested on Armada 3720 EspressoBin and Armada 388 Clearfog Pro boards.
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19036
Some devices cannot rely on the switch MDIO address passed in the DTB
for specifying single/multi-chip addressing mode. Introduce new property
"single-chip-addressing" which added to DTS will force single-chip mode.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14800
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
Switches that originate their own frames (eg obvious ones like Pause frames)
need a MAC address to use to send those frames from.
This API will hopefully begin to allow that to be configurable.
I'll have to go double check to see if it does indeed pass ARP frames between
switch ports with this disabled, but it seems required for the CPU port to see
ARP traffic.
I'll dig into this some more.
This indeed uses the same registers as the AR8216 and later chips.
There seems to be an issue with ARP requests being sent out from the CPU
through this switch here, so figuring that out is next. Learning works fine on
the AR8327 ethernet switch on the /other/ gigabit ethernet port, so I don't
think it's the network stack or ethernet driver.
Tested:
* DB120 - AR9340 SOC + ethernet switch (and other bits.)
* Add the bulk of the ATU table read function
* Correct how the ATU function and WAIT bits work
TODO:
* more testing, figure out how the multi-vlan table stuff works and push that
up to userspace
* Refactor the initial learning configuration (port learning, address expiry,
handling address moving between ports, etc, etc) into a separate HAL routine
* and ensure that it's consistent between switch chips - the AR8216,8316,724x,9331
SoCs all share the same switch code.
* .. the AR8327 needs doing - the defaults seem OK for now
* .. the AR9340 is different but it's also programmed now.
* Add support for flushing a single port worth of ATU entries
* Add support for fetching the ATU table from AR8216 and derived chips
Tested:
* AR9344, Carambola 2
TODO:
* Further testing on other chips
* Add AR9340 support
* Add AR8327 support
This stuff may be a bit fluid during this -HEAD cycle as various other
switch features are added, but the current stuff is enough to drive
initial development and features on the atheros range of integrated
and external switches.
* add a method to flush the whole address table;
* add a method to flush all addresses on a given port;
* add a method to download the address table;
* .. and then a method to fetch entries from the address table.
The table fetch/read methods pass through to the drivers for now since
the drivers may implement different ways of fetching/caching the address
table data. The atheros devices for example fetch the table by
iterating over the table through a set of registers and so you need
to keep that locked whilst you iterate otherwise you may have the table
flushed half way by a port status change.
This is a no-op until the userland and arswitch code shows up.
The switch hardware requires this bit to be set in order to kick start the
actual ATU update. This was being masked on some chips by the learning
programming (what to do when a MAC address moves, hash table collision, etc)
which is currently inconsistent between chips.
Tested:
* AR9344 SoC (AR7240 style switch internal)
Build with rtl8366rb has been broken due to incorrect retrieval of pointer
to device_t.
Reported by: lwhsu
Differential Revision: https://reviews.freebsd.org/D14044
This patch is cosmetic. It checks if allocation of ifnet structure failed.
It's better to have this check rather than assume positive scenario.
Submitted by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Reduce the use of local copies of switch register data.
The switch now works with the upstream dsa node (i.e. the upstream DTS).
Tested on: ClearFog Pro (88E6176), SG-3100 (88E6141)
Sponsored by: Rubicon Communications, LLC (Netgate)
r319886 ("Add the initial support for the Marvell 88E6141
and 88E6341 switches.") unveiled a problem with possible
multiple lock creation. Move its initialization
to the driver attach and for obtaining the switch ID
create a temprorary one, which is immediately destroyed
after the check.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Right now the driver only supports port VLANs, so make sure
etherswitch_getinfo() return the proper switch capabilities.
Handle the cases where not all ports are in use (that will also require
etherswitch cooperation).
Sponsored by: Rubicon Communications, LLC (Netgate)
Tested on WZR-HP-G301NH(RTL8366RB) and WZR-HP-G300NH(RTL8366SR).
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10740
e6000sw family automatically reflects PHY status in each port's registers.
Therefore it is not necessary to do a full PHY polling squence, which
results in much quicker operation and much less significant usage of
the SMI bus.
Care must be taken that the resulting ifmedia_active is identical to
what the PHY will compute, or gratuitous link status changes will
occur whenever the PHYs update function is called.
This patch implements above improvement. On the occasion set a pointer to
the proc structure to be part of software context instead of being
a global variable.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10714
Hitherto implementation of PHY polling resulted in a risk of an
endless loop and very high occupation of the SMI bus. Improve the
operation by limiting the polling tries and adding sleepable
pause.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10713
Malloc should always return something when M_WAITOK flag is used,
but keep this code and change flag to M_NOWAIT as it is under a lock
(allows for possible future change). Free ifnet structure to avoid
memory leak on failure.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10711
Add workaround mii access because of rt1310 is hang up on etherswitch mii poll.
And FDT away on arm platform.
Tested:
* wzr2-g300n
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10295
cannot access the GLOBAL2 register directly.
Despite the comment in code (which was misleading), the indirect access is
only used to read the switch CONFIG data from the scrap register and not
for the GLOBAL2 access.
Use the dsa data to define when the switch is in the Multi Chip Addressing
Mode (a even address different than zero).
While here fix a typo.
Sponsored by: Rubicon Communications, LLC (Netgate)
This patch brings 802.1q support for Marvell 88E606x ethernet switches.
Test is done on 88E6065 chip (Aterm WR1200).
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10144
arswitch_setled() and a number of _global_setup functions did not acquire the
lock before calling arswitch_modifyreg(). With WITNESS enabled this would
instantly panic.
Discovered on a TPLink-3600:
("panic: mutex arswitch not owned at sys/dev/etherswitch/arswitch/arswitch_reg.c:236")
Reviewed by: adrian, kan
Differential Revision: https://reviews.freebsd.org/D9187
This is Micrel KSZ8995MA driver code. KSZ8995MA uses SPI bus to control.
This code is written & tested on @SRCHACK's ksz8995ma board and FON2100
with gpiospi.
etherswitchcfg support commands: addtag, ingress, striptag, dropuntagged.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka, adrian
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8790
- recognize ports and vlangroups based on DTS file
- support multi-chip addresing mode (required in upcoming
Armada-388-Clearfog support)
- refactor attachment function
Each port in 'dsa' node should have 'vlangroup' property. Otherwise,
e6000sw will fail to attach.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D7328
it.
Remove bogus wrappers and use the kernel defaults.
While here, use DEVMETHOD_END.
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
This patch allows to specify PHY register offset for ukswitch. For instance,
switch MAICREL KS8995XA connected via MDIO to SoC, but PHY register starts
at 1. So hint for this case is: hint.ukswitch.0.phyoffset=1
No change/effect if hint is not set.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8584
This is Infineon ADM6996FC/M/MX driver code on etherswitch framework.
Support PORT and DOT1Q VLAN.
This code suppose ADM6996FC SDC/SDIO connect to SOC network interface
MDC/MDIO.
This code tested on Netgear WGR614Cv7.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8495
If MII1 interface is disabled, then enable phy4/mac4.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka, adrian
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6832
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
