in comments for .c and .h files respectively. Jack may want to clean up
style or other aspects once he's up and about again, but this gets the
kernel compiling.
shared code infrastructure that is family specific and
modular. There is also support for our latest gigabit
nic, the 82575 that is MSI/X and multiqueue capable.
The new shared code changes some interfaces to the core
code but testing at Intel has been going on for months,
it is fairly stable.
I have attempted to be careful in retaining any fixes that
CURRENT had and we did not, I apologize in advance if any
thing gets clobbered, I'm sure I'll hear about it :)
Approved by pdeuskar
- incorporate csjp's fix for a mishandled endian conversion
- convert PAGE_SIZE to 4096 for PCIe adapter workaround (my page size is not 4k)
- implement em_read_pcie_cap_reg where we set the max read size on pcie to 4k (taken from mxge)
Reviewed by: scottl and jfvogel
made to accommodate the chip being in promiscuous mode while
offloading VLAN tag processing to the hardware. We can now
properly handle the absence of VLAN tags from hardware stripping.
Reviewed by: rwatson, andre
MFC after: 1 month
our own watchdog that piggybacks on the em_local_timer() routine.
We suppose that the if_timer/if_watchdog interface should be
obsoleted, since it doesn't fit the modern SMP network stack.
NIC drivers should create their own watchdogs, that check and
clear the timers always holding driver's lock.
In collaboration with: jfv, scottl
- Test the mac_type rather than if_hwassist (since ifp doesn't exist yet)
to determine if the adapter supports TSO and thus to change the sizes
for the bus_dma tag.
Reviewed by: glebius
during detach() similar to other NIC drivers rather than allocating them
during init() and freeing them during stop():
- Move creation of tx bus_dma tag amd maps and tx_buffer_area from
em_setup_transmit_structures() to em_allocate_transmit_structures().
- Call em_allocate_xxx_structures() in em_attach().
- Only call em_free_xxx_structures() in em_detach().
- Change em_setup_xxx_structures() to free any existing tx or rx buffers
and in the case of rx repopulate the ring with newer buffers.
Reviewed by: jfv
the EOP descriptor in the first descriptor of the packet. And then
in em_txeof() search for DD bits set only in the EOP descriptors,
embedding the cleanup of all packet's descriptors into inner loop.
This change is important for future chips, where DD bit is going
to be set only on the EOP descriptors.
Submitted by: jfv
Details:
o if_em.c changes:
- Added several new PCI ids.
- Check em_check_phy_reset_block() before doing SIOCSIFMEDIA ioctl.
- Don't touch TARC registers, they are now handled in shared
code in if_em_hw.c.
- Move RDH and RDT setting to the end of
em_initialize_receive_unit().
- Declare em_read_pcie_cap_reg(), now empty.
o if_em_hw.c dropped in from vendor, then restored rev. 1.15.
o if_em_hw.h dropped in from vendor, then modified:
- Added RX overrun interrupt flag to interrupt enable mask.
- Remove declarations of em_io_read(), em_io_write().
Approved by: jfv
new device support, and it is hoped a more stable driver for 6.2. RELEASE.
This checkin was discussed and approved today by RE, scottl, jhb, and pdeuskar
stripping was disabled due to being in promisc mode. This is a hardware
bug. Update comment to explicitly state the reason the manual vlan tag
insertion in this case. See rev. 1.53 for further information as well.
Noticed by: jhb
generic vlan_start() takes care of it when vlan hardware insertion is disabled.
In em_set_promisc() add a note that BPF may also be enabled without going into
promisc mode.
Reviewed by: jfv
IP options and add skeleton IPv6 support. The new code structure can also be
easily enhanced to support new/more protocols (SCTP) in the future.
Reviewed by: jfv
and add skeleton IPv6 support. The new code structure can also be easily
enhanced to support new/more protocols (SCTP) and IP fragmentation in the
future.
In em_encap() only try to do TSO if 'dotso' is true.
Reviewed by: jfv
- EFBIG means the mbuf chain was too long and bus_dma ran out of segments.
Defragment the mbuf chain and try again. (Already existed, not changed.)
- ENOMEM means bus_dma could not obtain enough bounce buffers at this point
in time. Defer sending and try again later.
- All other errors, in particular EINVAL, are fatal and prevent the mbuf
chain from ever going through. Drop it and report error.
- Checking (nsegs == 0) is unnecessary as bus_dmamap_load_mbuf_sg() always
reports an error if it is < 1.
This prevents broken packets from clogging the interface queue indefinately.
Discussed with: scottl
Reviewed by: jfv
m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.
Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:
m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */
m->m_flags |= M_VLANTAG;
to mark the packet m with the specified VLAN tag.
On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:
if (m->m_flags & M_VLANTAG) {
... = m->m_pkthdr.ether_vtag; /* htons()? */
... pass tag to hardware ...
}
VLAN tags are stored in host byte order. Byte swapping may be necessary.
(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)
Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag
memory allocation have to be done.
Reviewed by: thompsa, yar
Sponsored by: TCP/IP Optimization Fundraise 2005
required by arches like sparc64 (not yet implemented) and sun4v where there
are seperate IOMMU's for each PCI bus... For all other arches, it will
end up returning NULL, which makes it a no-op...
Convert a few drivers (the ones we've been working w/ on sun4v) to the
new convection... Eventually all drivers will need to replace the parent
tag of NULL, w/ bus_get_dma_tag(dev), though dev is usually different for
each driver, and will require hand inspection...
Reviewed by: scottl (earlier version)
register. This really shouldn't be using pci_enable_io() directly as
bus_alloc_resource() does it already, but the cached copy of the
command word needs to be correct so the enable/disable mwi functions
work properly.
- Use pci bus accessors to read revision ID and subvendor IDs.
Reviewed by: jvogel
conditions. The cause of missing Tx completion interrupts comes from
Tx interrupt moderation mechanism(delayed interrupts) or chipset bug.
If Tx interrupt moderation mechanism is the cause of false watchdog
timeout error we should have to fix all device drivers that have Tx
interrupt moderation capability. We may need more investigation
for this issue. Anyway, the fix is the same for both cases.
This should fix occasional watchdog timeout errors seen on a few
systems.
Reported by: -net, Patrick M. Hausen < hausen AT punkt DOT de >
Tested by: Patrick M. Hausen < hausen AT punkt DOT de >
Previously em(4) requeued the failed mbuf chains from
bus_dmamap_load_mbuf_sg(9) failure to resend it later. However,
bus_dmamap_load_mbuf_sg(9) may never complete its request as the
fragmented frames can have more than EM_MAX_SCATTER segments.
To handle the above EFBIG case, defragment the frame with m_defrag(9)
and free the mbuf chain if it can't deframent the chain due to
resource shortage.
Reviewed by glebius (with improvements)
o Create one more spare DMA map for Rx handler to recover from
bus_dmamap_load_mbuf_sg(9) failure.
o Make sure to update status bit in Rx descriptors even if we failed
to allocate a new buffer. Previously it resulted in stuck condition
and em_handle_rxtx task took up all available CPU cycles.
o Don't blindly unload DMA map. Reuse loaded DMA map if received
packet has errors. This would speed up Rx processing a bit under
heavy load as it does not need to reload DMA map in case of error.
(bus_dmamap_load_mbuf_sg(9) is the most expensive call in driver
context.)
o Update if_iqdrops counter if it can't allocate a mbuf cluster.
With this change it's now possible to see queue dropped packets
with netstat(1).
o Update mbuf_cluster_failed counter if fixup code failed to
allocate mbuf header.
o Return ENOBUFS instead of ENOMEM in case of Rx fixup failure.
o Make adapter->lmp NULL in case of Rx fixup failure. Strictly
specking it's not necessary for correct operation but it makes
the intention clear.
o Remove now unused dropped_pkts member in softc.
With these changes em(4) should survive mbuf cluster allocation
failure on Rx path.
Reviewed by: pdeuskar, glebius (with improvements)
MCLBYTES - ETHER_ALIGN. Previously it applied the alignment fixup code
for oversized frames which would result in reduced performance on
strict alignment archs.
82571EB quad port copper NIC and has few minor fixes.
Details:
- if_em.c. Merged manually, viewing diff between new vendor
driver and previous one.
- if_em_hw.c. Dropped in from vendor, and then restored
revision 1.15.
