Commit Graph

134158 Commits

Author SHA1 Message Date
Warner Losh
36fef1500d Add additional product id and quirks entry for MetaGeek Wi-Spy
Submitted by: Robert Noland
PR: 114481
Approved by: re@ (blanket)
2007-07-10 21:00:10 +00:00
Alan Cox
20dd22a24e Correct a problem in the ZERO_COPY_SOCKETS option, specifically, in
vm_page_cowfault().  Initially, if vm_page_cowfault() sleeps, the given
page is wired, preventing it from being recycled.  However, when
transmission of the page completes, the page is unwired and returned to
the page queues.  At that point, the page is not in any special state
that prevents it from being recycled.  Consequently, vm_page_cowfault()
should verify that the page is still held by the same vm object before
retrying the replacement of the page.  Note: The containing object is,
however, safe from being recycled by virtue of having a non-zero
paging-in-progress count.

While I'm here, add some assertions and comments.

Approved by: re (rwatson)
MFC After: 3 weeks
2007-07-10 18:41:34 +00:00
Maksim Yevmenkin
08b755600f Mark ng_h4(4) as not MPSAFE and disconnect it from the build for now.
Approved by:	re (rwatson)
2007-07-10 16:38:43 +00:00
Florent Thoumie
74a2924f4d Fix commit mail retrieval when using message-id.
Submitted by:	novel
Approved by:	re (hrs)
2007-07-10 15:30:15 +00:00
Bruce Evans
8e55bfaf4b Don't use almost perfectly pessimal cluster allocation. Allocation
of the the first cluster in a file (and, if the allocation cannot be
continued contiguously, for subsequent clusters in a file) was randomized
in an attempt to leave space for contiguous allocation of subsequent
clusters in each file when there are multiple writers.  This reduced
internal fragmentation by a few percent, but it increased external
fragmentation by up to a few thousand percent.

Use simple sequential allocation instead.  Actually maintain the fsinfo
sequence index for this.  The read and write of this index from/to
disk still have many non-critical bugs, but we now write an index that
has something to do with our allocations instead of being modified
garbage.  If there is no fsinfo on the disk, then we maintain the index
internally and don't go near the bugs for writing it.

Allocating the first free cluster gives a layout that is almost as good
(better in some cases), but takes too much CPU if the FAT is large and
the first free cluster is not near the beginning.

The effect of this change for untar and tar of a slightly reduced copy
of /usr/src on a new file system was:

Before (msdosfs 4K-clusters):
untar:  459.57 real              untar from cached file (actually a pipe)
tar:    342.50 real              tar from uncached tree to /dev/zero
Before (ffs2 soft updates 4K-blocks 4K-frags)
untar:   39.18 real
tar:     29.94 real
Before (ffs2 soft updates 16K-blocks 2K-frags)
untar:   31.35 real
tar:     18.30 real

After (msdosfs 4K-clusters):
untar    54.83 real
tar      16.18 real

All of these times can be improved further.

With multiple concurrent writers or readers (especially readers), the
improvement is smaller, but I couldn't find any case where it is
negative.  342 seconds for tarring up about 342 MB on a ~47MB/S partition
is just hard to unimprove on.  (This operation would take about 7.3
seconds with reasonably localized allocation and perfect read-ahead.)
However, for active file systems, 342 seconds is closer to normal than
the 16+ seconds above or the 11 seconds with other changes (best I've
measured -- won easily by msdosfs!).  E.g., my active /usr/src on ffs1
is quite old and fragmented, so reading to prepare for the above
benchmark takes about 6 times longer than reading back the fresh copies
of it.

Approved by:	re (kensmith)
2007-07-10 13:20:24 +00:00
Xin LI
920d0c826e Forced commit to say that the previous changeset was:
Submitted by:	YAMAMOTO Shigeru <shigeru iij ad jp>
Approved by:	re (rwatson, implicit)
2007-07-10 10:19:45 +00:00
Xin LI
5224b41a98 Add sed(1) to cross tools. We do want newly built version during
buildworld.

Approved by:	re (rwatson)
2007-07-10 10:17:32 +00:00
Robert Watson
43bbb6aa10 Further cleanup of UDPv4:
- Move udp_sendspace and udp_recvspace global variables and associated
  sysctls to the top of the file where most other such things are present.

- Rename static variable 'blackhole' to 'udp_blackhole' and unstaticize
  so that we can add blackhole support for UDPv6 using the same MIB
  variable.

- Move udp_append() above udp_input() to match the function order in
  udp6_usrreq.c.

Approved by:	re (kensmith)
2007-07-10 09:30:46 +00:00
Tai-hwa Liang
5ee1ac4645 Fixing the mount_smbfs(8) hanging by utilising the destroy_dev_sched() KPI.
Relevant threads:

  http://lists.freebsd.org/pipermail/freebsd-current/2007-June/074329.html

Reviewed by:	kib, bp (slightly different version)
Tested by:	Yuri Pankov <yuri.pankov at gmail dot com>,
		Jiawei Ye <leafy7382 at gmail dot com>
Approved by:	re (kensmith)
2007-07-10 09:23:10 +00:00
Matt Jacob
2e4637cd75 Get rid of a couple of Coverity found sign comparison errors.
Approved by:	re (Ken)
MFC after:	3 days
2007-07-10 07:55:59 +00:00
Matt Jacob
bb4f528dd8 Be more conservative- turn off fast posting and RIO for 22XX cards.
Approved by:	re (ken)
MFC after:	3 days
2007-07-10 07:55:04 +00:00
Kip Macy
b8fe6051bf MFp4 122896
- reduce cpu usage by as much as 25% (40% -> 30) by doing txq reclaim more efficiently
   - use mtx_trylock when trying to grab the lock to avoid spinning during long encap loop
   - add per-txq reclaim task
   - if mbufs were successfully re-claimed try another pass
- track txq overruns with sysctl

Approved by: re (blanket)
2007-07-10 06:01:45 +00:00
Marcel Moolenaar
c108b80c8c Cast the arguments to atomic_*_ptr() when mapping it to atomic_*_32()
This is a minimal fix.

Approved by: re (kensmith)
2007-07-10 04:40:00 +00:00
John Baldwin
1db0049fa1 Fix alignment of context switch traces.
MFC after:	1 week
Approved by:	re (rwatson: "I like simple patches.")
2007-07-10 00:01:30 +00:00
Warner Losh
2f33a9032b Missed in last commit: add usb task for rue to use for its ticks.
Approved by: re (bmah)
2007-07-09 20:56:39 +00:00
Ariff Abdullah
0937dd1ec0 - Add codec id for Realtek ALC268.
- Add controller id for Intel 82801I (ICH9).
  PR:			kern/114399
  Submitted by:		Michael Fuckner <michael@fuckner.net>

- MSI support. Disable by default due to various issues with too many
  broken hardwares. MSI can be enabled through device.hints(5) or
  kenv(8) by setting "hint.pcm.%d.msi=1".
  Partially submitted by:	kevlo
                         	YAMAMOTO Taku <taku@tackymt.homeip.net>
  Tested by:			joel, kevlo, YAMAMOTO Taku

Approved by:	re (hrs)
MFC after:	3 days
2007-07-09 20:42:11 +00:00
Ariff Abdullah
8a7c4d36cb Fix stream suspend/resume activity due to its states being
clobbered by pcm channel start/stop trigger operation.

Approved by:	re (hrs)
2007-07-09 20:41:23 +00:00
Robert Watson
542a638396 General style, white space, and comment cleanup; move to ANSI C
prototypes, don't use register, etc.  Synchronize structure and
layout to the IPv4 versions of these functions to a greater extent,
making visual comparison easier.

Remove now stale or incorrect comments.

Enable full lock assertions, and correct one exception handling
case where the wrong label was jumped to.

Tested by:	bz
Approved by:	re (bmah)
2007-07-09 17:47:04 +00:00
Warner Losh
f129c7fd08 When all the other drivers were converted to scheduling a taskqueue to
do the heavy lifting of the 'mii_tick' function, rue was left behind.
Implement this in a naive way.  Reports from the field show this makes
the driver functional with some locking issues, as opposed to an
instant panic.  Those will be addressed in a later version of the
driver.

Approved by: re@ (bmah)
2007-07-09 16:58:07 +00:00
Sam Leffler
80e9f71ab5 update for 0.5.8 import
Approved by:	re (hrs)
2007-07-09 16:26:48 +00:00
Sam Leffler
316f794028 resolve conflicts
Approved by:	re (hrs)
2007-07-09 16:20:41 +00:00
Sam Leffler
c0eb94f2c3 This commit was generated by cvs2svn to compensate for changes in r171322,
which included commits to RCS files with non-trunk default branches.
2007-07-09 16:15:06 +00:00
Sam Leffler
75cbf10273 Import of hostapd 0.5.8 2007-07-09 16:15:06 +00:00
Sam Leffler
552e0ccfb2 fixup mcast handling in bpf program; this enables forthcoming support
for 802.1x over wired interfaces

Submitted by:	Jouke Witteveen
Approved by:	re (hrs)
2007-07-09 15:57:10 +00:00
Bruce A. Mah
41331ce64c New release notes: sed(1) case-insensitive matching, setenv(3)
API change.

Modified release notes:  Clarify architectures for nfe(4) note and
mention that it replaces nve(4) in i386/amd64 GENERIC [1].

Suggested by:	Michael Plass [1]
Approved by:	re (implicitly)
2007-07-09 15:53:56 +00:00
Sam Leffler
fdef6acc3d updates for 802.11-related parameters
Reviewed by:	thompsa
Approved by:	re (hrs)
2007-07-09 15:39:58 +00:00
Warner Losh
bb900be1fe Fix duplicates that crept in at the last minute :-(.
Noticed by: Ian Freislich
Approved by: re@ (blanket)
2007-07-09 14:26:08 +00:00
Bruce M Simpson
d90b8675c2 Fix a regression in IPv4 multicast join path (IP_ADD_MEMBERSHIP).
With the in_mcast.c code, if an interface for an IPv4 multicast join was
not specified, and a route did not exist for the specified group in the
unicast forwarding tables, the join would be rejected with the error
EADDRNOTAVAIL.
This change restores the old behaviour whereby if no interface is specified,
and no route exists for the group destination, the IPv4 address list is
walked to find a non-loopback, multicast-capable interface to satisfy
the join request.
This should resolve problems with starting multicast services during
system boot or when a default forwarding entry does not exist.

Approved by:	re (rwatson)
2007-07-09 10:36:47 +00:00
Doug Rabson
2dc26b36c8 Correct a reference-counting mistake in the ZFS code which led to abnormal
memory usage and pessimal cache performance.

Reviewed by: pjd
Approved by: re (rwatson)
2007-07-09 09:03:49 +00:00
John-Mark Gurney
f616cf330e document the call to wakeup after a task has been run...
Approved by:	re (hrs)
MFC after:	3 days
2007-07-09 06:24:10 +00:00
Warner Losh
66807691fe Further diff reduction against the proposed merged usbdevs: Add a few
more vendors, use slightly more standardized names.

No md5 chagnes for !USBVERBOSE kernels

Approved by: re@ (blanket)
2007-07-09 06:20:07 +00:00
Warner Losh
dc950f0469 More vendors from the merged list.
Sort NETGEAR list per convention.
Swap QUALCOMM and QUALCOMM2.
Add a few vendor products.

no md5 changes with this file (except when USBVERBOSE is enabled)

Approved by: re@ (blanket)
2007-07-09 05:47:32 +00:00
Marcel Moolenaar
acd760988d dma_tag is a static structure. Testing for it being a NULL pointer
doesn't make sense. Rewrite to what was intended.

Correctly warned about by: GCC
Approved by: re (bmah)
2007-07-09 04:58:16 +00:00
Pyun YongHyeon
628e65ec53 Fix typo.
Reported by:	Danny Braniss <danny at cs dot huji dot ac dot il>
Approved by:	re (bmah)
2007-07-09 01:13:00 +00:00
Alan Cox
d1974c0df1 Eliminate the special case handling of OBJT_DEVICE objects in
vm_fault_additional_pages() that was introduced in revision 1.47.  Then
as now, it is unnecessary because dev_pager_haspage() returns zero for
both the number of pages to read ahead and read behind, producing the
same exact behavior by vm_fault_additional_pages() as the special case
handling.

Approved by: re (rwatson)
2007-07-08 19:42:52 +00:00
Attilio Rao
ea11c140d0 NULL_LDT_BASE is used in !SMP kernels too and set_user_ldt() is not
properly called. Address these two issues.

Reported by: Tinderbox
Tested by: le
Approved by: jeff (mentor)
Approved by: re
2007-07-08 18:17:42 +00:00
Xin LI
1df86a323d MFp4:
- Plug memory leak.
 - Respect underlying vnode's properties rather than assuming that
   the user want root:wheel + 0755.  Useful for using tmpfs(5) for
   /tmp.
 - Use roundup2 and howmany macros instead of rolling our own version.
 - Try to fix fsx -W -R foo case.
 - Instead of blindly zeroing a page, determine whether we need a pagein
   order to prevent data corruption.
 - Fix several bugs reported by Coverity.

Submitted by:	Mingyan Guo <guomingyan gmail com>, Howard Su, delphij
Coverity ID:	CID 2550, 2551, 2552, 2557
Approved by:	re (tmpfs blanket)
2007-07-08 15:56:12 +00:00
Hidetoshi Shimokawa
ead41a8810 Fix a bug of retrieving configuration ROM.
- Handle directories and leaves other than unit directories and text leaves
  correctly.
- Now we can retrieve CROM of iSight correctly.

Approved by: re (hrs)
Tested by: flz
MFC after: 3 days
2007-07-08 11:47:52 +00:00
Nate Lawson
d73144e778 Now that we have a function that can be called from a cdevsw close()
entry point, use it.

Approved by:	re
2007-07-07 17:54:33 +00:00
Attilio Rao
05dfa22fe9 Actual code shows several problems in ia32 LDT handling:
- When a LDT entry changes, the old one is freed while it is still
  referenced by gdt and ldtr.  This can lead to disruptive behaviours in
  particular on SMP machines.
- When a LDT entry changes, it is assumed that the only one entity sharing
  the same LDT are threads in the same proc.  It doesn't take in account
  edge cases where two processes share the same VM (rfork'ed ones, for
  example).

This patch addresses these two problems and addictionally it fixes the
usage of refcount switching back it to the old manually-grown refcount
(since in this case would be faster).

Diagnosed by: tegge
Tested by: pho (a former version)
Reviewed by: kib
Approved by: jeff (mentor)
Approved by: re
2007-07-07 16:59:01 +00:00
Tim Kientzle
ed3ba42250 Fix installworld: /usr/bin/printf isn't available then,
so use awk's printf for the formatting here instead.

Pointy hat: Yours Truly
Approved by: re
2007-07-07 16:55:42 +00:00
Robert Watson
bd84d20457 Minor UDPv4 cleanup: capitalize comment, move statistics update after mbuf
free to be consistent with other error handling, and release socket buffer
lock before freeing mbufs and statistics updates rather than after.

Approved by:	re (kensmith)
2007-07-07 09:46:34 +00:00
Alan Cox
65ea29a690 When a cached page is reactivated in vm_fault(), update the counter that
tracks the total number of reactivated pages.  (We have not been
counting reactivations by vm_fault() since revision 1.46.)

Correct a comment in vm_fault_additional_pages().

Approved by:	re (kensmith)
MFC after:	1 week
2007-07-06 21:25:21 +00:00
Warner Losh
f1d2cc831c Trivial differences with the proposed merged BSD usbdevs file merged
in.  These are exclusively in the name of the company for this round.
No new devices have been added, but the MITEL entry has been
eliminated because nothing uses it.  You won't see any difference
unless you have USBVERBOSE defined for the kernel.

Approved by: re@ (blanket)
2007-07-06 20:05:39 +00:00
Warner Losh
56f6c2d8fa uhub already does the printing and naming of a device, so don't do it
again here for compat drivers.

Approved by: re@ (blanket)
2007-07-06 20:02:37 +00:00
Xin LI
68b843a591 Add a test case for sed(1) regression - we should not ignore case
when not being asked to do so.

Approved by:	re (hrs)
2007-07-06 16:36:52 +00:00
Xin LI
870945d830 Before doing compile_re() which needs a parameter to identify
whether we should ignore case, determine the flag by calling
compile_flags() first.  Also, make sure that we obtain an
initialized cmd->u.s buffer before processing further.  We
may want to refine this solution later, but for now, make
the changes in order to unbreak world build after a sed(1)
with rev. 1.29 of compile.c is installed.

Approved by:	re (hrs)
2007-07-06 16:34:56 +00:00
Tim Kientzle
49d8ecb49e Forced commit to document a cast correction needed to get
clean compiles using either old or new API.  I should
have just committed this one-line fix separately.  Apologies.

Approved by: re (Ken Smith)
2007-07-06 15:51:59 +00:00
Tim Kientzle
dbb4eb7d9c Make test suite work with libarchive 1.3.1: Take advantage of
ARCHIVE_VERSION_STAMP to selectively disable tests that don't
apply to that version; new "skipping()" function reports skipped
tests; modify final summary to report component test failures and
skips.

Note:  I don't currently intend to MFC the test suite itself;
anyone interested should just checkout and use this version
of the test suite, which should work for any library version.

Approved by: re (Ken Smith, blanket)
2007-07-06 15:43:11 +00:00
Tim Kientzle
ab16ac785a New "version stamp" simplifies determining the exact version
of libarchive being used.  I've been taking advantage of this
with a recent round of updates to libarchive_test so that it
can test older and newer versions of the library.

Approved by: re (Ken Smith)
2007-07-06 15:36:38 +00:00