Sam Leffler
a0cc3f8558
mark timestamp for pending fragments
...
Noticed by: Jeffrey D. Chung
2005-02-23 04:52:30 +00:00
Sam Leffler
b4b64678d0
rev 1.19 fixed wpa supplicant but broke wpa authenticator; when operating
...
as an authenticator need to always check for the unicast key in the node
(as was the case before)
Submitted by: Divy Le Ray
2005-02-10 17:00:48 +00:00
Sam Leffler
f9cd9174fa
propagate state kept in the bss node when re-creating the node
...
on state transitions; this is a stopgap measure, need to rethink
how we do management of this state
Identified by: Divy Le Ray
2005-02-10 16:59:04 +00:00
Sam Leffler
cb212bbc75
correct check for unicast key being setup; wpa_supplicant in particular
...
uses only the global key state so looking in the per-node key slot is wrong
Submitted by: Tai-hwa Liang
2005-02-03 16:21:07 +00:00
Sam Leffler
badaf7bbb2
supply a default ic_reset method for drivers; the ioctl code expect this
...
method to always be setup
Submitted by: Tai-hwa Liang
2005-01-27 17:39:17 +00:00
Sam Leffler
49a152366e
update node reference count debug msgs to include the node address
...
since the mac address may not be sufficient to uniquely identify a node
2005-01-24 20:50:20 +00:00
Sam Leffler
5aa17efa69
clear IEEE80211_F_WMEUPDATE when building the initial beacon frame so we
...
don't do an update on the first beacon
2005-01-24 20:41:12 +00:00
Sam Leffler
2c21ffc8f5
noop change so RUN->RUN transition isn't considered invalid
...
(it happens on ibss merge)
2005-01-24 20:39:29 +00:00
Sam Leffler
5a11fbca83
add macros to convert between txop's and usecs
2005-01-24 20:38:26 +00:00
Sam Leffler
2ffc548f43
o clarify that beacon interval settings are in TU's, not ms
...
o add macros to convert between TU's and ms
2005-01-24 19:39:07 +00:00
Sam Leffler
acc4f7f50c
statically allocate the station/neighbor node table; the deferred
...
allocation scheme introduced a race condition during device state
transitions
2005-01-24 19:32:10 +00:00
Sam Leffler
a8b16e8727
handle potential stale values of bssid in neighbor nodes that
...
can occur after an ibss merge
Submitted by: David Young
2005-01-22 20:33:37 +00:00
Sam Leffler
4ef04d32f3
when ssid suppression is enabled don't respond to probe requests
...
unless our ssid is specified
2005-01-22 20:31:22 +00:00
Sam Leffler
e5a96ac7fb
be consistent in naming inactivity timers;
...
net.wlan.X.inact -> net.wlan.X.inact_run
2005-01-22 20:29:23 +00:00
Sam Leffler
a88be5f1ae
o replace out-of-line copy of FCS w/ a flag that indicates the
...
frame includes FCS (requires applications to be updated, but since
we weren't doing the out-of-line FCS stuff anyway app changes
were needed already)
o add a flag to indicate padding exists between the 802.11 header and
the payload (e.g. for Atheros cards)
o diff reducation against netbsd
MFC after: 1 week
2005-01-22 20:12:05 +00:00
Sam Leffler
44acc00dda
when a station is timed out for inactivity, remove it from the table
...
so it isn't considered again
2005-01-20 02:59:21 +00:00
Sam Leffler
ce64703289
explicitly avoid timing out ourself due to inactivity; it
...
can easily happen if the bss is quiet
2005-01-20 02:54:18 +00:00
Sam Leffler
90d0d0366b
fix refcnt leak in adhoc mode: entries in the neighbor table
...
created due to rx'd frames had an extra reference
2005-01-20 02:53:11 +00:00
Sam Leffler
a84679cd18
remove debug msg from ieee80211_iterate_nodes; it makes logs very noisy
...
as onoe rate control invokes this once a second
2005-01-18 20:35:39 +00:00
Sam Leffler
29d368a780
avoid possible null pointer deref when refcnt debugging is enabled; the
...
node may be orphaned
Submitted by: Tai-hwa Liang
2005-01-18 20:34:22 +00:00
Sam Leffler
96acc1b61c
Explicitly ignore ibss merge requests when the node is ic_bss. This can
...
happen on the first management frame received from a neighbor; we assume
any merge candidate will send more frames and those should be processed
with a suitable table entry.
Stepped on by: Tai-hwa Liang
2005-01-18 20:30:16 +00:00
Sam Leffler
3fcfbbfa76
Simplify the logic for checking the scan candidates at the end of a scan.
...
Hold a lock on the table instead of futzing with reference counts which
was potentially dangerous except drivers were quiescent while we did this
so the table contents never changed. Disable the hack logic for removing
scan candidates with multiple association failures; it's never done the
right thing and will be fixed correctly with background scanning goes in.
2005-01-18 20:21:29 +00:00
Sam Leffler
5784a3714a
correct logic that caused beacon frames received in ibss mode to be
...
discarded when not scanning
2005-01-18 20:07:44 +00:00
Sam Leffler
44c72e4299
move beacon/probe response counting down to after we've decided whether or
...
not we're going to process the frame; this makes the counters reflect frames
actually processes instead of received (discarded frames were already counted)
2005-01-18 20:04:51 +00:00
Sam Leffler
c75ac46947
when scanning is interrupted reset state so table entries go in the station
...
table and not the scan table
Noticed by: Tai-hwa Liang
2005-01-18 19:59:40 +00:00
Sam Leffler
98ff62638d
do fixed rate check when considering if a scan candidate is suitable so when
...
it's time to join the bss we can't get an error
2005-01-18 19:52:36 +00:00
Sam Leffler
ef92bcdc97
Correct scan candidate selection logic for dual-band devices: prefer
...
candidate on 5Ghz channel to candidate on 2Ghz channel only when the
rssi are comparable (wasn't considering rssi).
2005-01-01 17:48:27 +00:00
Sam Leffler
db966c8b2b
remove netbsd rcsid lines; they are way out of date and we appear to be
...
diverging too much to make tracking these files worthwhile
2004-12-31 22:44:26 +00:00
Sam Leffler
1f1d781074
bump copyright for 2005
2004-12-31 22:42:38 +00:00
Sam Leffler
2045f69945
fixup inactivity timers:
...
o ic_inact_auth is a bad name, it's the inactivity threshold
for being associated but not authorized; use it that way
o reset ni_inact when switching inactivity thresholds to
minimize the race against the timer (don't want to lock
for this stuff)
o change the inactivity probe threshold from a one-shot to
cover a range: when below this threshold but not expired
send a probe each inactivity interval; should probably
guard against the interval being turned way down as this
could cause us to spam the net with probes
2004-12-31 22:05:13 +00:00
Sam Leffler
5e923d2ebd
Relearn how WPA keying is supposed to work and fix WPA+WME while
...
we're at it:
o WPA/802.11i has a unicast key and a group key; in station mode
everything is sent with the unicast key--we were consulting the
destination mac address and incorrectly using the group key
o (perpetuate fallback use of the default tx key to maintain
compatibility with the way wpa_supplicant works)
o correct EAPOL encryption logic to check unicast key instead
of assuming other state implies this
o move QoS encapsulation up to before enmic work so TKIP has the
information required to calculate the pseudo-header
o do not do QoS-encapsulation of EAPOL frames as some ap's do the
wrong thing with such frames (may need to revisit this if ap's
start dropping non-QoS frames from stations assoc'd with QoS)
o move ieee80211_mbuf_adjust closer to its caller
2004-12-31 21:54:53 +00:00
Sam Leffler
7076eda0b5
disable default use of wme until we can sort out interoperability issues;
...
users that want it can explicitly enable it
2004-12-31 21:48:15 +00:00
Sam Leffler
a95fa8d386
s/inline/__inline/
2004-12-31 21:30:42 +00:00
Sam Leffler
736b3dc32e
compare pointers against NULL
2004-12-31 21:28:41 +00:00
Sam Leffler
b8fcf54640
make ap mode sta association debug msg as informative as sta mode
2004-12-31 21:27:53 +00:00
Sam Leffler
624a1bdb63
do 11g erp station management in turboG mode too
2004-12-31 21:25:28 +00:00
Sam Leffler
3d07392995
check if the node/station table is already present before creating one; this
...
can happen on an ibss merge
2004-12-31 21:22:12 +00:00
Sam Leffler
3ea67c5431
include phy mode in scan debug msg
2004-12-31 21:19:59 +00:00
Sam Leffler
380c5fa9ba
accept IEEE80211_KEYIX_NONE for a default tx key
2004-12-31 21:13:35 +00:00
Sam Leffler
65e278a877
don't return prematurely from processing a beacon or probe response frame
...
when associated; this corrects a problem where doing a scan while associated
caused the associated ap to sometimes not be included in the scan set
2004-12-31 21:11:59 +00:00
Sam Leffler
c0fa32ce0b
change ieee80211_parse_wmeparams to return a unique value when the ie
...
is invalid so we can distinguish this from needing a parameter update;
fixes dynamic update of wme parameters
2004-12-31 21:09:43 +00:00
Sam Leffler
6b31278104
remove stray \n from debug msg
2004-12-31 21:05:05 +00:00
Sam Leffler
8116d318fc
clear wep bit in 802.11 header after crypto decap so packet
...
capture doesn't see it
2004-12-31 21:04:05 +00:00
Sam Leffler
da615e957d
o add net.wlan.X.driver_caps mib variable for setting the driver capabilities
...
flags for testing
o debug msg consistency fixups
2004-12-31 21:01:41 +00:00
Sam Leffler
ecca7ea2ee
correct pseudo-mic header calculation for QoS frames
2004-12-31 20:59:03 +00:00
Sam Leffler
f287c95b86
whitespace/debug msg fixups
2004-12-31 20:58:06 +00:00
Sam Leffler
dfefa312d9
add ieee80211_hdrspace and ieee80211_anyhdrspace to calculate the space
...
for an ieee80211 header taking into account padding requirements
2004-12-31 20:56:32 +00:00
Sam Leffler
4e844c9453
correct header length calculations on tx path for QoS-encapsulated frames
...
when IEEE80211_F_DATAPAD is set (e.g. ath); must use ieee80211_hdrspace
instead of ieee80211_hdrsize
2004-12-31 20:51:41 +00:00
Sam Leffler
7432b7cc84
const'ify ivp reference
2004-12-31 20:44:15 +00:00
Sam Leffler
fc508e8e4f
add/fixup debug msgs
2004-12-31 20:42:51 +00:00