device names "md" or "md[0-9]*" and a "file" option are specified in
/etc/fstab like this:
md none swap sw,file=/swap.bin 0 0
- Add GBDE/GELI encrypted swap space specification support, which
rc.d/encswap supported. The /etc/fstab lines are like the following:
/dev/ada1p1.bde none swap sw 0 0
/dev/ada1p2.eli none swap sw 0 0
.eli devices accepts aalgo, ealgo, keylen, and sectorsize as options.
swapctl(8) can understand an encrypted device in the command line
like this:
# swapctl -a /dev/ada2p1.bde
- "-L" flag is added to support "late" option to defer swapon until
rc.d/mountlate runs.
- rc.d script change:
rc.d/encswap -> removed
rc.d/addswap -> just display a warning message if $swapfile is defined
rc.d/swap1 -> renamed to rc.d/swap
rc.d/swaplate -> newly added to support "late" option
These changes alleviate a race condition between device creation/removal
and swapon/swapoff.
MFC after: 1 week
Reviewed by: wblock (manual page)
provided by Isilon.
- Add an rm_assert() supporting various lock assertions similar to other
locking primitives. Because rmlocks track readers the assertions are
always fully accurate unlike rw_assert() and sx_assert().
- Flesh out the lock class methods for rmlocks to support sleeping via
condvars and rm_sleep() (but only while holding write locks), rmlock
details in 'show lock' in DDB, and the lc_owner method used by
dtrace.
- Add an internal destroyed cookie so that API functions can assert
that an rmlock is not destroyed.
- Make use of rm_assert() to add various assertions to the API (e.g.
to assert locks are held when an unlock routine is called).
- Give RM_SLEEPABLE locks their own lock class and always use the
rmlock's own lock_object with WITNESS.
- Use THREAD_NO_SLEEPING() / THREAD_SLEEPING_OK() to disallow sleeping
while holding a read lock on an rmlock.
Submitted by: andre
Obtained from: EMC/Isilon
This is an extended version of ipv4_addr_IF which supports both IPv4 and
IPv6, and multiple range specifications. To avoid to generate too many
addresses, the maximum number of the generated addresses is currently
limited to 31.
- Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable.
- ipv6_prefix_IF now supports !/64 prefix length. In addition to the old
64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64
is supported.
- Replace ifconfig command with $IFCONFIG_CMD variable to support
a dry-run mode in the future.
- Remove IP aliases before removing all of IPv4 addresses when doing
"rc.d/netif down".
- Add a DAD wait to network6_getladdr() because it is possible to fail to
configure an EUI64 address when ipv6_prefix_IF is specified.
A summary of the supported ifconfig_* variables is as follows:
# IPv4 configuration.
ifconfig_em0="inet 192.168.0.1"
# IPv6 configuration.
ifconfig_em0_ipv6="inet6 2001:db8::1/64"
# IPv4 address range spec. Now deprecated.
ipv4_addr_em0="10.2.1.1-10"
# IPv6 alias.
ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70"
# IPv4 alias.
ifconfig_em0_alias1="inet 10.2.2.1/24"
# IPv4 alias with range spec w/o AF keyword (backward compat).
ifconfig_em0_alias2="10.3.1.1-10/32"
# IPv6 alias with range spec.
ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64"
# ifconfig_IF_aliases is just like ifconfig_IF_aliasN.
ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24"
# IPv6 alias (backward compat)
ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64"
# IPv6 alias w/o AF keyword (backward compat)
ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64"
# IPv6 prefix.
ipv6_prefix_em0="2001:db8::/64"
Tested by: Kimmo Paasiala
optionally start the traversal from a previously found element by passing the
element in as "var". Passing a NULL "var" retains the same semantics as the
regular FOREACH macros.
Kudos to phk for suggesting the "FROM" suffix instead of my original proposal.
Reviewed by: jhb (previous version), rpaulo
MFC after: 1 week
This is actually a fully functional build except:
* All internal shared libraries are static linked to make sure there
is no interference with ports (and to reduce build time).
* It does not have the python/perl/etc plugin or API support.
* By default, it installs as "svnlite" rather than "svn".
* If WITH_SVN added in make.conf, you get "svn".
* If WITHOUT_SVNLITE is in make.conf, this is completely disabled.
To be absolutely clear, this is not intended for any use other than
checking out freebsd source and committing, like we once did with cvs.
It should be usable for small scale local repositories that don't
need the python/perl plugin architecture.
But we don't want to set it to + for bmake since it breaks make -N
which is used to supress the normal handling of targets marked with .MAKE
(which seems broken in fmake and might be why _+_ was introduced).
Add some comments to explain what's gong on.
Reviewed by: obrien
- remove return statements from void function [1]
- include missing header
- use O_CLOEXEC instead of separate fcntl() calls
PR: docs/179459 [1]
MFC after: 1 week
This adds some new NetBSD releases and makes some simple formatting changes.
With this commit NetBSD and FreeBSD should have identical files.
DragonflyFBSD has the version immediately prior to this commit.
When committing to this file please try to coordinate with all three groups.
Submitted by: Alan Barrett <apb@cequrux.com>
{,ipv6_}static_routes and rc.d/routing. For example:
static_routes="foo bar:em0"
route_foo="-net 10.0.0.0/24 -gateway 192.168.2.1"
route_bar="-net 192.168.1.0/24 -gateway 192.168.0.2"
At boot time, all of the static routes are installed as before.
The differences are:
- "/etc/rc.d/netif start/stop <if>" now configures static routes
with :<if> if any.
- "/etc/rc.d/routing start/stop <af> <if>" works as well. <af> cannot be
omitted when <if> is specified, but a keyword "any" or "all" can be used
for <af> and <if>.
Realtek RTL8188CU/RTL8192CU USB IEEE 802.11b/g/n wireless cards.
This driver requires microcode which is available in FreeBSD ports:
net/urtwn-firmware-kmod.
Hiren ported the urtwn(4) man page from OpenBSD and Glen just commited a port
for the firmware.
TODO:
- 802.11n support
- Stability fixes - the driver can sustain lots of traffic but has trouble
coping with simultaneous iperf sessions.
- fix debugging
MFC after: 2 months
Tested by: kevlo, hiren, gjb
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
The build system is really intricate and I had a hard time to remind the
whole picture even when reading my own words. This one will hopefully
be better.
QLogic 8300 Series Adapters
Submitted by: David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Approved by: George Neville-Neil (gnn@freebsd.org)
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
While here, add a few more NetBSD versions to the tree itself.
Submitted by: Alan Barrett <apb@cequrux.com>
Submitted by: Thomas Klausner <wiz@netbsd.org>
The NTB allows you to connect two systems with this device using a PCI-e
link. The driver is made of two modules:
- ntb_hw which is a basic hardware abstraction layer for the device.
- if_ntb which implements the ntb network device and the communication
protocol.
The driver is limited at the moment to CPU memcpy instead of using DMA, and
only Back-to-Back mode is supported. Also the network device isn't full
featured yet. These changes will be coming soon. The DMA change will also
bring in the ioat driver from the project branch it is on now.
This is an initial port of the GPL/BSD Linux driver contributed by Jon Mason
from Intel. Any bugs are my contributions.
Sponsored by: Intel
Reviewed by: jimharris, joel (man page only)
Approved by: jimharris (mentor)
The European version of the patent expired in 2011.
The US version of the patent expired in 2012 or prior.
Reviewed by: des
No objection from: cperciva, ehaupt
'install' since it breaks buildworld after the introduction and
use of 'install -l' in r245752. Overriding INSTALL causes
/usr/bin/install to be used instead of the proper
/usr/src/tools/install.sh which handles the new flag.
Approved by: bapt
MFC after: 2 weeks
This compiler flag enforces that that people either mark variables
static or use an external declarations for the variable, similar to how
-Wmissing-prototypes works for functions.
Due to the fact that Yacc/Lex generate code that cannot trivially be
changed to not warn because of this (lots of yy* variables), add a
NO_WMISSING_VARIABLE_DECLARATIONS that can be used to turn off this
specific compiler warning.
Announced on: toolchain@
The description explains why we should not configure "path",
"host.hostname", "command", "ip4.addr" and ip6.addr" parameters with
this, but rather use the historical rc.conf(5) options.
MFC after: 3 days
bits were granted. Relationships have been provided by the mentees,
dates have been sourced from either the mentees or the CVS mailing list
archives.
Obtained from: mux, wilko, msmith, peter, schweikh
Obtained from: gallatin, dfr, murray, jkoshy
on this controller. Indicate that the 5300 is the *only* controller that
will only work in simple mode.
Bus rescans should not be needed now and I consider it a bug if disks do
not appear or dissapear when created or destroyed.
Obtained from: Yahoo! Inc
Introduce counter(9) API, that implements fast and raceless counters,
provided (but not limited to) for gathering of statistical data.
See http://lists.freebsd.org/pipermail/freebsd-arch/2013-April/014204.html
for more details.
In collaboration with: kib
Reviewed by: luigi
Tested by: ae, ray
Sponsored by: Nginx, Inc.
These zones have slab size == sizeof(struct pcpu), but request from VM
enough pages to fit (uk_slabsize * mp_ncpus). An item allocated from such
zone would have a separate twin for each CPU in the system, and these twins
are at a distance of sizeof(struct pcpu) from each other. This magic value
of distance would allow us to make some optimizations later.
To address private item from a CPU simple arithmetics should be used:
item = (type *)((char *)base + sizeof(struct pcpu) * curcpu)
These arithmetics are available as zpcpu_get() macro in pcpu.h.
To introduce non-page size slabs a new field had been added to uma_keg
uk_slabsize. This shifted some frequently used fields of uma_keg to the
fourth cache line on amd64. To mitigate this pessimization, uma_keg fields
were a bit rearranged and least frequently used uk_name and uk_link moved
down to the fourth cache line. All other fields, that are dereferenced
frequently fit into first three cache lines.
Sponsored by: Nginx, Inc.
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the
atacontrol utility and some man pages. Remove useless now options ATA_CAM.
No objections: current@, stable@
MFC after: never
Change the default compiler for little-endian ARM to clang to allow for more
testing before 10.0 is released. As LLVM and clang currnetly lack support
for big-endian ARM leave gcc as the default there.
This will also allow us to investigate moving to use the hard floating-point
version of the ARM EABI on SoCs that include the Vector Floating Point unit.
A version of this is included in all ARMv6 and ARMv7 SoCs we currently, and
are likely to support.
Both the current ABI and the new EABI are supported by clang and it will be
built correctly depending on which is selected by the user.
This avoids having separate cases in the install rule for PROGNAME set and
not set. This is a minor cleanup in advance of further support for
standalone debug files.
already defined. Setting it with "+=" makes it possible for other make
scripts (e.g. bsd.dtrace.mk) to include additional object files in the
linker arguments.
Approved by: emaste (co-mentor)
The scope of these callbacks is primarily to support actions that affect the
taskqueue's thread environments. They are entirely optional, and
consequently are introduced as a new API: taskqueue_set_callback().
This interface allows the caller to specify that a taskqueue requires a
callback and optional context pointer for a given callback type.
The callback types included in this commit can be used to register a
constructor and destructor for thread-local storage using osd(9). This
allows a particular taskqueue to define that its threads require a specific
type of TLS, without the need for a specially-orchestrated task-based
mechanism for startup and shutdown in order to accomplish it.
Two callback types are supported at this point:
- TASKQUEUE_CALLBACK_TYPE_INIT, called by every thread when it starts, prior
to processing any tasks.
- TASKQUEUE_CALLBACK_TYPE_SHUTDOWN, called by every thread when it exits,
after it has processed its last task but before the taskqueue is
reclaimed.
While I'm here:
- Add two new macros, TQ_ASSERT_LOCKED and TQ_ASSERT_UNLOCKED, and use them
in appropriate locations.
- Fix taskqueue.9 to mention taskqueue_start_threads(), which is a required
interface for all consumers of taskqueue(9).
Reviewed by: kib (all), eadler (taskqueue.9), brd (taskqueue.9)
Approved by: ken (mentor)
Sponsored by: Spectra Logic
MFC after: 1 month
includes MFV 238590, 238592, 247580
MFV 238590, 238592:
In the first zfs ioctl restructuring phase, the libzfs_core library was
introduced. It is a new thin library that wraps around kernel ioctl's.
The idea is to provide a forward-compatible way of dealing with new
features. Arguments are passed in nvlists and not random zfs_cmd fields,
new-style ioctls are logged to pool history using a new method of
history logging.
http://blog.delphix.com/matt/2012/01/17/the-future-of-libzfs/
MFV 247580 [1]:
To address issues of several deadlocks and race conditions the locking
code around dsl_dataset was rewritten and the interface to synctasks
was changed.
User-Visible Changes:
"zfs snapshot" can create more arbitrary snapshots at once (atomically)
"zfs destroy" destroys multiple snapshots at once
"zfs recv" has improved performance
Backward Compatibility:
I have extended the compatibility layer to support full backward
compatibility by remapping or rewriting the responsible ioctl arguments.
Old utilities are fully supported by the new kernel module.
Forward Compatibility:
New utilities work with old kernels with the following restrictions:
- creating, destroying, holding and releasing of multiple snapshots
at once is not supported, this includes recursive (-r) commands
Illumos ZFS issues:
2882 implement libzfs_core
2900 "zfs snapshot" should be able to create multiple,
arbitrary snapshots at once
3464 zfs synctask code needs restructuring
References:
https://www.illumos.org/issues/2882https://www.illumos.org/issues/2900https://www.illumos.org/issues/3464 [1]
MFC after: 1 month
Sponsored by: Hybrid Logic Inc. [1]
This change allows creating file descriptors with close-on-exec set in some
situations. SOCK_CLOEXEC and SOCK_NONBLOCK can be OR'ed in socket() and
socketpair()'s type parameter, and MSG_CMSG_CLOEXEC to recvmsg() makes file
descriptors (SCM_RIGHTS) atomically close-on-exec.
The numerical values for SOCK_CLOEXEC and SOCK_NONBLOCK are as in NetBSD.
MSG_CMSG_CLOEXEC is the first free bit for MSG_*.
The SOCK_* flags are not passed to MAC because this may cause incorrect
failures and can be done later via fcntl() anyway. On the other hand, audit
is expected to cope with the new flags.
For MSG_CMSG_CLOEXEC, unp_externalize() is extended to take a flags
argument.
Reviewed by: kib
you for your time on portmgr.
Remove one member from bugmeister that has stepped down recently. Thank
you for your time on bugmeister.
While here clean up the graph a bit (remove dead cvs repos)
LibYAML is a YAML 1.1 parser and emitter under MIT license which will
soon be used by the pkg boostrap (usr.bin/pkg) and bhyve
Reviewed by: roberto, antoine
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.
the firmware (instead of just the main firmware version) when evaluating
firmware compatibility. Document the new "hw.cxgbe.fw_install" knob
being introduced here.
This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will
mostly do what was requested in the PR but it's a bit more intelligent
in that it won't reinstall the same firmware repeatedly if the knob is
left set.
PR: kern/173584
MFC after: 5 days
- Use ln -fs to create a symlink.
- Remove pkgadd for docports.
- Use WITHOUT_JADETEX=yes instead of WITH_JADETEX=no.
- Add {WORLD,KERNEL}_FLAGS to [BTWK]MAKE.
- Use makefs(8) and gpart(8) for sparc64 ISO image[2].
- Add publisher option to makefs(8)[2].
Based on work by: gjb[1]
Discussed with: marius, nwhitehorn[2]
Dont use/link ARCMT, StaticAnalyzer and Rewriter to clang when the user
specifies not to. Dont build ASTMatchers with Rewriter disabled and
StaticAnalyzer when it's disabled.
Without all those three, the clang binary shrinks (x86_64) from ~36MB
to ~32MB (unstripped).
To disable these clang components, and get a smaller clang binary built
and installed, set WITHOUT_CLANG_FULL in src.conf(5). During the
initial stages of buildworld, those extra components are already
disabled automatically, to save some build time.
MFC after: 1 week
