Commit Graph

513 Commits

Author SHA1 Message Date
Philip Paeps
e948693ed7 Add the sfxge(4) device driver, providing support for 10Gb Ethernet adapters
based on Solarflare SFC9000 family controllers.  The driver supports jumbo
frames, transmit/receive checksum offload, TCP Segmentation Offload (TSO),
Large Receive Offload (LRO), VLAN checksum offload, VLAN TSO, and Receive Side
Scaling (RSS) using MSI-X interrupts.

This work was sponsored by Solarflare Communications, Inc.

My sincere thanks to Ben Hutchings for doing a lot of the hard work!

Sponsored by:	Solarflare Communications, Inc.
MFC after:	3 weeks
2011-11-16 17:11:13 +00:00
Bjoern A. Zeeb
0bc7cf6fde Add QLogic 10 Gigabit Ethernet & CNA Adapter Driver version 1.30
for 3200 and 8200 series cards.

Submitted by:	David C Somayajulu (david.somayajulu@qlogic.com),
		Qlogic Corporation
MFC After:	3 days
2011-11-03 21:20:22 +00:00
Xin LI
db1fda10b4 Add the 9750 SATA+SAS 6Gb/s RAID controller card driver, tws(4). Many
thanks for their contiued support to FreeBSD.

This is version 10.80.00.003 from codeset 10.2.1 [1]

Obtained from:	LSI http://kb.lsi.com/Download16574.aspx [1]
2011-10-04 21:40:25 +00:00
Lawrence Stewart
f772f9fe43 Rename the cc.4 and cc.9 modular congestion control related man pages to
mod_cc.4 and mod_cc.9 respectively to avoid any possible confusion with the cc.1
gcc man page. Update references to these man pages where required.

Requested by:	Grenville Armitage
Approved by:	re (kib)
MFC after:	3 days
2011-09-15 12:15:36 +00:00
Christian Brueffer
90c0612545 Fix the manpage section number, thus unbreaking the hardware notes build. (1)
Also hook up vxge(4) to the build.

Submitted by:	simon (1)
Approved by:	re (blackend)
2011-08-26 17:35:22 +00:00
Alexander Motin
126123eacc Update ata(4) manual page, reflecting migration to CAM-based ATA stack
(`options ATA_CAM` enabled by default).

Approved by:	re (kib)
2011-08-17 19:43:41 +00:00
Hans Petter Selasky
884a2a6996 Rename recently added USB serial driver.
Suggested by:	YongHyeon PYUN
MFC after:	7 days
2011-06-04 20:40:24 +00:00
Hans Petter Selasky
0c38ca8cf4 Add support for new USB serial driver.
Submitted by:	Lev Serebryakov, lev @
MFC after:	14 days
2011-06-01 17:58:27 +00:00
Adrian Chadd
0259f5a250 Add ath_ahb and ath_pci module manpages. 2011-05-30 10:07:46 +00:00
Adrian Chadd
8c1ac33ed8 Add a manpage for geom_map(4).
Submitted by:	ray@dlink.ua
2011-05-05 14:43:35 +00:00
Adrian Chadd
1b53e47cde Add a manpage for the nvram2env driver. 2011-04-04 22:30:12 +00:00
Hans Petter Selasky
f728775b21 - Add missing xhci(4) manual page.
- Minor update in some USB manual pages.

MFC after:	3 days
Approved by:	thompsa (mentor)
2011-02-24 18:08:23 +00:00
Lawrence Stewart
29f269dc1f Final commit to round out the "Five New TCP Congestion Control Algorithms for
FreeBSD" FreeBSD Foundation funded project.

- Add new man pages for the modular congestion control, Khelp and Hhook
  frameworks (cc.4, cc.9, khelp.9 and hhook.9).

- Add new man pages for each available congestion control algorithm (cc_chd.4,
  cc_cubic.4, cc_hd.4, cc_htcp.4, cc_newreno.4 and cc_vegas.4).

- Add a new man page for the Enhanced Round Trip Time (ERTT) Khelp module
  (h_ertt.4).

- Update the TCP (tcp.4) man page to mention the TCP_CONGESTION socket option,
  cross reference to cc.4 and remove references to the retired
  "net.inet.tcp.newreno" sysctl MIB variable.

In collaboration with:	David Hayes <dahayes at swin edu au> and
				Grenville Armitage <garmitage at swin edu au>
Sponsored by:	FreeBSD Foundation
MFC after:	3 months
2011-02-21 11:56:11 +00:00
Navdeep Parhar
54e4ee7163 cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.
MFC after:	3 weeks
2011-02-18 08:00:26 +00:00
Hans Petter Selasky
26fdf1e8b6 - Fix build of manual page and inclusion of mos driver into kernel config file.
- Fix style compliancy by wrapping some long lines in if_mos.c

Approved by:	thompsa (mentor)
2011-02-17 07:39:53 +00:00
Marius Strobl
e0fb7b7b8b Add a manual page for rgephy(4) and reference it as appropriate. The
motivation for having rgephy.4 is to document the special media option
add in r217415.

MFC after:	3 days
2011-01-15 22:07:08 +00:00
Andrew Thompson
02d09fbb52 Add manpage for runfw, the Ralink RT2700U, RT2800U and RT3000U firmware
module. Also fix a few nits in run.4.

Submitted by:	Akinori Furukoshi
2011-01-11 21:51:46 +00:00
Pyun YongHyeon
bb0667afa1 Add vte(4) man page and hook up vte(4) to the build.
Also add Xr to appropriate man pages.
2010-12-31 00:46:30 +00:00
Robert Watson
f37972a945 Add a rudimentary Xen man page summarising the state of Xen on amd64 and
i386, how to configure the kernel, and some known issues.  Further
refinement almost certainly required.  This is not a Xen installation
manual.

MFC after:	3 days
Sponsored by:	DARPA, AFRL
2010-12-13 23:26:31 +00:00
Nick Hibma
0ea0127a4d Add a man page for usb_quirk module, plus references in other man pages,
and updated comments in the usb_quirk.h header file.

The main purpose of this is to expose the quirks for ejecting 3G
modules. usb_modeswitch in Linux does a great job of collecting
information on these, and with the quirks module people can try out the
modeswitch config file entries on FreeBSD, hence the SCSI strings in the
man page.

MFC after:	2 weeks
2010-11-10 23:45:44 +00:00
Ana Kukec
ddf21c6ae1 Manual page for the kernel side Secure Neighbor Discovery support.
Reviewed by:	brueffer
Approved by:	bz (mentor)
2010-09-19 12:54:18 +00:00
Alexander Motin
c45456fb44 Add atrtc(4) manual page. 2010-09-17 08:44:54 +00:00
Alexander Motin
479c85c65b Fix typo ${attimer.4} -> ${_attimer.4}. 2010-09-17 07:44:01 +00:00
Alexander Motin
74f3a46a7d Add attimer(4) manual page. 2010-09-17 04:55:01 +00:00
Alexander Motin
d11087789e Add hpet(4) man page. 2010-09-15 04:51:07 +00:00
Kenneth D. Merry
2fff0b4f02 MFp4 (//depot/projects/mps/...)
Add a man page for the mps(4) driver, and reference it in the
mpt(4) driver man page.

Sponsored by:	Spectra Logic Corporation
2010-09-14 21:40:29 +00:00
Konstantin Belousov
edb78df075 Add aesni(4) manpage. 2010-09-06 20:35:48 +00:00
Warner Losh
25faff346c MFtbemd:
Prefer MACHNE_CPUARCH to MACHINE_ARCH in most contexts where you want
to test of all the CPUs of a given family conform.
2010-08-23 22:24:11 +00:00
Takanori Watanabe
34d9d01f86 Hook tpm.4 manual to hook. 2010-08-13 05:01:44 +00:00
Rui Paulo
daef39e7ae Remove the acpi_aiboost driver. It has been replaced by aibs(4). 2010-07-25 17:55:57 +00:00
Rafal Jaworowski
42c8cbe162 Provide initial man pages for Flattened Device Tree support and the common
drivers.

Sponsored by:	The FreeBSD Foundation
2010-07-14 13:03:00 +00:00
Nathan Whitehorn
299a3f1c30 Install arch-specific manpages by MACHINE_CPUARCH, not MACHINE_ARCH. 2010-07-13 12:51:02 +00:00
Lawrence Stewart
ed92e5c424 Hook the siftr.4 man page up to the build and alphabetically sort siis into its
correct place whilst there.

Sponsored by:	FreeBSD Foundation
Submitted by:	pluknet <pluknet at gmail dot com>
2010-07-03 15:05:14 +00:00
Rui Paulo
bbe4a97d41 Import the acpi_aibs(4) driver written by Constantine A. Murenin.
It has more features than acpi_aiboost(4) and it will eventually replace
acpi_aiboost(4).

Submitted by:	Constantine A. Murenin <cnst at FreeBSD.org>
Reviewed by:	freebsd-acpi, imp
MFC after:	1 month
2010-06-25 15:32:46 +00:00
Andrey V. Elsukov
d359a62d44 New netgraph node ng_patch(4). It performs data modification of packets
passing through. Modifications are restricted to a subset of C language
operations on unsigned integers of 8, 16, 32 or 64 bit size.
These are: set to new value (=), addition (+=), subtraction (-=),
multiplication (*=), division (/=), negation (= -), bitwise AND (&=),
bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=),
shift right (>>=). Several operations are all applied to a packet
sequentially in order they were specified by user.

Submitted by:	Maxim Ignatenko <gelraen.ua at gmail.com>
		Vadim Goncharov <vadimnuclight at tpu.ru>
Discussed with:	net@
Approved by:	mav (mentor)
MFC after:	1 month
2010-06-09 12:25:57 +00:00
Gleb Smirnoff
f25a8a0150 Add uep(4), driver for USB onscreen touch panel from eGalax.
The driver is stub. It just creates device entry and feeds
reassembled packets from hardware into it.

If in future we would port wsmouse(4) from NetBSD, or make
sysmouse(4) to support absolute motion events, then the driver
can be extended to act as system mouse. Meanwhile, it just
presents a /dev/uep0, that can be utilized by X driver, that
I am going to commit to ports tree soon.

The name for the driver is chosen to be the same as in NetBSD,
however, due to different USB stacks this driver isn't a port.
2010-05-25 21:20:56 +00:00
Alexander Motin
dd48af360f Import mvs(4) - Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA controllers
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
2010-05-02 19:28:30 +00:00
Pyun YongHyeon
9b00b6e1ee Add sge(4) man page and hook up sge(4) to the build.
Also add Xr to appropriate man pages.
2010-04-14 21:27:48 +00:00
Weongyo Jeong
7b0c4174cd Connect bwn.4 to the build. 2010-02-25 19:43:22 +00:00
Gavin Atkinson
ee158a7fc4 Kernel modules for these drivers are installed on all platforms, so
install the man pages on all platforms too.
2010-02-08 23:30:28 +00:00
Gavin Atkinson
8ce0c61c05 Install the padlock(4) man page on amd64 as well as i386, to match the
platforms where the driver itself is compiled and installed.

PR:		docs/130895
Reported by:	George Hartzell <hartzell alerce.com>
MFC after:	1 week
2010-02-08 21:24:12 +00:00
Andrew Thompson
676d231868 Hook run(4) to the build. 2010-01-28 22:28:01 +00:00
Xin LI
5c335c81b3 Add a manual page for nvram(4).
MFC after:	2 weeks
2010-01-27 00:34:52 +00:00
Joerg Wunsch
a70473eec5 Add man pages for the gpib(4), pcii(4), and tnt4882(4) drivers.
MFC after:	3 days
2010-01-24 19:11:08 +00:00
Christian Brueffer
b5212e27ec Manpage for the siba(4) Sonic Inc. Silicon Backplane driver.
Submitted by:	weongyo
2010-01-15 19:34:40 +00:00
Christian Brueffer
1d1405c1b5 Add manpages for ipwfw(4) and iwifw(4), based on iwnfw(4).
MFC after:	2 weeks
2010-01-14 22:21:43 +00:00
Andrew Thompson
941e286383 Add a driver by Fredrik Lindberg for Option HSDPA USB devices. These differ
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.

Obtained from:	Fredrik Lindberg <fli@shapeshifter.se>
2010-01-13 03:16:31 +00:00
Marius Strobl
6a01731bb6 Add a man page for mk48txx(4).
Requested by:	n_hibma
Obtained from:	NetBSD (original version)
2009-12-25 22:01:39 +00:00
Andriy Gapon
5022f21bd9 amdsbwd: new driver for AMD SB600/SB7xx watchdog timer
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.

Reviewed by:	des, gavin, rpaulo
MFC after:	3 weeks
2009-11-30 11:44:03 +00:00
Alexander Motin
ca17f444be Add ada(4) man page. 2009-11-19 16:19:05 +00:00