rather than implementing its own {uid,gid,other} checks against vnode
mode. Similar change to linprocfs currently under review.
Obtained from: TrustedBSD Project
int p_can(p1, p2, operation, privused)
which allows specification of subject process, object process,
inter-process operation, and an optional call-by-reference privused
flag, allowing the caller to determine if privilege was required
for the call to succeed. This allows jail, kern.ps_showallprocs and
regular credential-based interaction checks to occur in one block of
code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL,
and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a
series of static function checks in kern_prot, which should not
be invoked directly.
o Commented out capabilities entries are included for some checks.
o Update most inter-process authorization to make use of p_can() instead
of manual checks, PRISON_CHECK(), P_TRESPASS(), and
kern.ps_showallprocs.
o Modify suser{,_xxx} to use const arguments, as it no longer modifies
process flags due to the disabling of ASU.
o Modify some checks/errors in procfs so that ENOENT is returned instead
of ESRCH, further improving concealment of processes that should not
be visible to other processes. Also introduce new access checks to
improve hiding of processes for procfs_lookup(), procfs_getattr(),
procfs_readdir(). Correct a bug reported by bp concerning not
handling the CREATE case in procfs_lookup(). Remove volatile flag in
procfs that caused apparently spurious qualifier warnigns (approved by
bde).
o Add comment noting that ktrace() has not been updated, as its access
control checks are different from ptrace(), whereas they should
probably be the same. Further discussion should happen on this topic.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
object before falling back on privilege. Make vaccess() accept an
additional optional argument, privused, to determine whether
privilege was required for vaccess() to return 0. Add commented
out capability checks for reference. Rename some variables to make
it more clear which modes/uids/etc are associated with the object,
and which with the access mode.
o Update file system use of vaccess() to pass NULL as the optional
privused argument. Once additional patches are applied, suser()
will no longer set ASU, so privused will permit passing of
privilege information up the stack to the caller.
Reviewed by: bde, green, phk, -security, others
Obtained from: TrustedBSD Project
Implement subdirs.
Build the full "devicename" for cloning functions.
Fix panic when deleted device goes away.
Collaps devfs_dir and devfs_dirent structures.
Add proper cloning to the /dev/fd* "device-"driver.
Fix a bug in make_dev_alias() handling which made aliases appear
multiple times.
Use devfs_clone to implement getdiskbyname()
Make specfs maintain the stat(2) timestamps per dev_t
Remove old DEVFS support fields from dev_t.
Make uid, gid & mode members of dev_t and set them in make_dev().
Use correct uid, gid & mode in make_dev in disk minilayer.
Add support for registering alias names for a dev_t using the
new function make_dev_alias(). These will show up as symlinks
in DEVFS.
Use makedev() rather than make_dev() for MFSs magic devices to prevent
DEVFS from noticing this abuse.
Add a field for DEVFS inode number in dev_t.
Add new DEVFS in fs/devfs.
Add devfs cloning to:
disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
md(4), tun(4), bpf(4), fd(4)
If DEVFS add -d flag to /sbin/inits args to make it mount devfs.
Add commented out DEVFS to GENERIC
with the new snapshot code.
Update addaliasu to correctly implement the semantics of the old
checkalias function. When a device vnode first comes into existence,
check to see if an anonymous vnode for the same device was created
at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than
creating a new vnode for the device. This corrects a problem which
caused the kernel to panic when taking a snapshot of the root
filesystem.
Change the calling convention of vn_write_suspend_wait() to be the
same as vn_start_write().
Split out softdep_flushworklist() from softdep_flushfiles() so that
it can be used to clear the work queue when suspending filesystem
operations.
Access to buffers becomes recursive so that snapshots can recursively
traverse their indirect blocks using ffs_copyonwrite() when checking
for the need for copy on write when flushing one of their own indirect
blocks. This eliminates a deadlock between the syncer daemon and a
process taking a snapshot.
Ensure that softdep_process_worklist() can never block because of a
snapshot being taken. This eliminates a problem with buffer starvation.
Cleanup change in ffs_sync() which did not synchronously wait when
MNT_WAIT was specified. The result was an unclean filesystem panic
when doing forcible unmount with heavy filesystem I/O in progress.
Return a zero'ed block when reading a block that was not in use at
the time that a snapshot was taken. Normally, these blocks should
never be read. However, the readahead code will occationally read
them which can cause unexpected behavior.
Clean up the debugging code that ensures that no blocks be written
on a filesystem while it is suspended. Snapshots must explicitly
label the blocks that they are writing during the suspension so that
they do not cause a `write on suspended filesystem' panic.
Reorganize ffs_copyonwrite() to eliminate a deadlock and also to
prevent a race condition that would permit the same block to be
copied twice. This change eliminates an unexpected soft updates
inconsistency in fsck caused by the double allocation.
Use bqrelse rather than brelse for buffers that will be needed
soon again by the snapshot code. This improves snapshot performance.
the gating of system calls that cause modifications to the underlying
filesystem. The gating can be enabled by any filesystem that needs
to consistently suspend operations by adding the vop_stdgetwritemount
to their set of vnops. Once gating is enabled, the function
vfs_write_suspend stops all new write operations to a filesystem,
allows any filesystem modifying system calls already in progress
to complete, then sync's the filesystem to disk and returns. The
function vfs_write_resume allows the suspended write operations to
begin again. Gating is not added by default for all filesystems as
for SMP systems it adds two extra locks to such critical kernel
paths as the write system call. Thus, gating should only be added
as needed.
Details on the use and current status of snapshots in FFS can be
found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness
is not included here. Unless and until you create a snapshot file,
these changes should have no effect on your system (famous last words).
Don't fake any file types, just set vap->va_type to IFTOVT(stb.st_mode).
If something does not report its mode, vap->va_type is set to VNON
accordingly.
using decimal major and minor numbers. "ls -l" reports
disk partitions using decimal major numbers and hex
minor numbers.
make specfs use decimal major numbers and hex minor numbers,
just like "ls -l"
problems when fetch(1) was passed `-o -'. The rationale of this change
is that applications attempting to change underlying vnodes for /dev/fd
nodes are improperly written and the use of this interface should not
ever have been encouraged. Proper alternatives are fchmod, fchown and
others.
PR: 18952
- Remove stale, unused fdescnode->fd_link structure member.
stderr nodes. More specific items of this patch:
o Removed support for symbolic links, and the need for
fdesc_readlink().
o Put all the code from fdesc_attr() into fdesc_getattr() and removed
fdesc_attr(). This also made it easier to properly give all nodes
unique inode numbers.
o The removal of all non-fd nodes allowed the removal of the fdesc_read(),
fdesc_write(), and fdesc_ioctl() nodes, since we no longer have nodes
that get special handling.
o Correct the component name validity-checking in fdesc_lookup(). It
previously detected the end of the string by checking for a terminating
NUL, now it uses cnp->cn_namelen.
o Handle kqueue files as FIFOs. This is probably the closest file type
to represent this type of file there is, and it is unfortunately not
very representative of a kqueue. Creation time is not supported by
kqueue, so ctime, mtime and atime are all set to the current time when
getattr() was called.
o Also set st_[mca]time to the current time since there's no data in
socket structures that can be used to fill this in (FIFOs).
o Simplify fdesc_readdir() since it only has to report the numbered
fd nodes. Add `.' and `..' directory links as well.
o Remove read bits from directories as they tend to confuse programs
like tar(1).
Reviewed by: phk
Discussed with: bde (earlier on, not quite review)
<sys/bio.h>.
<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.
Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.
Still a few bogus uses of struct buf to track down.
Repocopy by: peter
There's no excuse to have code in synthetic filestores that allows direct
references to the textvp anymore.
Feature requested by: msmith
Feature agreed to by: warner
Move requested by: phk
Move agreed to by: bde
Exceptions:
Vinum untouched. This means that it cannot be compiled.
Greg Lehey is on the case.
CCD not converted yet, casts to struct buf (still safe)
atapi-cd casts to struct buf to examine B_PHYS
(Much of this done by script)
Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.
Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.
Add bio_queue field for struct bio aware disksort.
Address a lot of stylistic issues brought up by bde.
substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo)
substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo)
This patch is machine generated except for the ccd.c and buf.h parts.
field in struct buf: b_iocmd. The b_iocmd is enforced to have
exactly one bit set.
B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.
Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.
Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue. It is likely to write on your disk
where it should have been reading.
This change is a step in the direction towards a stackable BIO capability.
A lot of this patch were machine generated (Thanks to style(9) compliance!)
Vinum users: Greg has not had time to test this yet, be careful.
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
