Notable upstream pull request merges:
#11153 Scalable teardown lock for FreeBSD
#11651 Don't bomb out when using keylocation=file://
#11667 zvol: call zil_replaying() during replay
#11683 abd_get_offset_struct() may allocate new abd
#11693 Intentionally allow ZFS_READONLY in zfs_write
#11716 zpool import cachefile improvements
#11720 FreeBSD: Clean up zfsdev_close to match Linux
#11730 FreeBSD: bring back possibility to rewind the
checkpoint from bootloader
Obtained from: OpenZFS
MFC after: 2 weeks
A simple find command appeared in Version 1 AT&T UNIX and was removed in
Version 3 AT&T UNIX. It was rewritten for Version 5 AT&T UNIX and later
be enhanced for the Programmer's Workbench (PWB). These changes were
later incorporated in AT&T UNIX v7.
Reviewed by: imp
MFC after: 1 week
Notable upstream pull request merges:
#11153 Scalable teardown lock for FreeBSD
#11651 Don't bomb out when using keylocation=file://
#11667 zvol: call zil_replaying() during replay
#11683 abd_get_offset_struct() may allocate new abd
#11693 Intentionally allow ZFS_READONLY in zfs_write
#11716 zpool import cachefile improvements
#11720 FreeBSD: Clean up zfsdev_close to match Linux
#11730 FreeBSD: bring back possibility to rewind the
checkpoint from bootloader
(Note I am also applying this to main and stable/13, to restore the old
libcxxrt ABI and to avoid having to maintain a compat library.)
After the recent cherry-picking of libcxxrt commits 0ee0dbfb0d and
d2b3fadf2d, users reported that editors/libreoffice packages from the
official package builders did not start anymore. It turns out that the
combination of these commits subtly changes the ABI, requiring all
applications that depend on internal details of struct _Unwind_Exception
(available via unwind-arm.h and unwind-itanium.h) to be recompiled.
However, the FreeBSD package builders always use -RELEASE jails, so
these still use the old declaration of struct _Unwind_Exception, which
is not entirely compatible. In particular, LibreOffice uses this struct
in its internal "uno bridge" component, where it attempts to setup its
own exception handling mechanism.
To fix this incompatibility, go back to the old declarations of struct
_Unwind_Exception, and restore the __LP64__ specific workaround we had
in place before (which was to cope with yet another, older ABI bug).
Effectively, this reverts upstream libcxxrt commits 88bdf6b290da
("Specify double-word alignment for ARM unwind") and b96169641f79
("Updated Itanium unwind"), and reapplies our commit 3c4fd2463b
("libcxxrt: add padding in __cxa_allocate_* to fix alignment").
PR: 253840
Add parsing of the rewind options.
When I was upstreaming the change [1], I omitted the part where we
detect that the pool should be rewind. When the FreeBSD repo has
synced with the OpenZFS, this part of the code was removed.
[1] FreeBSD repo: 277f38abff
[2] OpenZFS repo: f2c027bd6a
Originally reviewed by: tsoome, allanjude
Originally reviewed by: kevans (ok from high-level overview)
Signed-off-by: Mariusz Zaborski <oshogbo@vexillium.org>
PR: 254152
Reported by: Zhenlei Huang <zlei.huang at gmail.com>
Obtained from: https://github.com/openzfs/zfs/pull/11730
TSFOOR happens if a beacon with a given TSF isn't received within the
programmed/expected TSF value, plus/minus a fudge range. (OOR == out of range.)
If this happens then it could be because the baseband/mac is stuck, or
the baseband is deaf. So, do a cold reset and resync the beacon to
try and unstick the hardware.
It also happens when a bad AP decides to err, slew its TSF because they
themselves are resetting and they don't preserve the TSF "well."
This has fixed a bunch of weird corner cases on my 2GHz AP radio upstairs
here where it occasionally goes deaf due to how much 2GHz noise is up
here (and ANI gets a little sideways) and this unsticks the station
VAP.
For AP modes a hung baseband/mac usually ends up as a stuck beacon
and those have been addressed for a long time by just resetting the
hardware. But similar hangs in station mode didn't have a similar
recovery mechanism.
Tested:
* AR9380, STA mode, 2GHz/5GHz
* AR9580, STA mode, 5GHz
* QCA9344 SoC w/ on-board wifi (TL-WDR4300/3600 devices); 2GHz
STA mode
Right now ts_antenna is either 0 or 1 in each supported HAL so
this is purely a sanity check.
Later on if I ever get magical free time I may add some extensions
for the NICs that can have slightly more complicated antenna switches
for transmit and I'd like this to not bust memory.
Implement a driver for the RTC embedded in the RK805/RK808 power
management system used for RK3328 and RK3399 SoCs.
Based on experiments on my RK808, setting the time doesn't alter the
internal/inaccessible sub-second counter, therefore there's no point
in calling clock_schedule().
Based on an earlier revision by andrew.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D22692
Sponsored by: Google
MFC after: 1 week
Queue all XPT_ASYNC ccb's and run those in a new cam async thread. This thread
is allowed to sleep for things like memory. This should allow us to make all the
registration routines for cam periph drivers simpler since they can assume they
can always allocate memory. This is a separate thread so that any I/O that's
completed in xpt_done_td isn't held up.
This should fix the panics for WAITOK alloations that are elsewhere in the
storage stack that aren't so easy to convert to NOWAIT. Additional future work
will convert other allocations in the registration path to WAITOK should
detailed analysis show it to be safe.
Reviewed by: chs@, rpokala@
Differential Revision: https://reviews.freebsd.org/D29210
Completions for crypto requests on port 1 can sometimes return a stale
cookie value due to a firmware bug. Disable requests on port 1 by
default on affected firmware.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26581
These fixes are only relevant for requests on the second port. In
some cases, the crypto completion data, completion message, and
receive descriptor could be written in the wrong order.
- Add a separate rx_channel_id that is a copy of the port's rx_c_chan
and use it when an RX channel ID is required in crypto requests
instead of using the tx_channel_id.
- Set the correct rx_channel_id in the CPL_RX_PHYS_ADDR used to write
the crypto result.
- Set the FID to the first rx queue ID on the adapter rather than the
queue ID of the first rx queue for the port.
- While here, use tx_chan to set the tx_channel_id though this is
identical to the previous value.
Reviewed by: np
Reported by: Chelsio QA
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29175
Apparently GCC only supports arithmetic expressions that use static
const variables in initializers starting with GCC8. To keep older
versions happy use a macro instead.
Fixes: 221622ec0c ("lib/msun: Avoid FE_INEXACT for x86 log2l/log10l")
Reported by: Jenkins
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D29233
We have seen several cases of processes which have become "stuck" in
kern_sigsuspend(). When this occurs, the kernel's td_sigblock_val
is set to 0x10 (one block outstanding) and the userspace copy of the
word is set to 0 (unblocked). Because the kernel's cached value
shows that signals are blocked, kern_sigsuspend() blocks almost all
signals, which means the process hangs indefinitely in sigsuspend().
It is not entirely clear what is causing this condition to occur.
However, it seems to make sense to add some protection against this
case by fetching the latest sigfastblock value from userspace for
syscalls which will sleep waiting for signals. Here, the change is
applied to kern_sigsuspend() and kern_sigtimedwait().
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29225
This permits these routines to use special logic for initializing MD
kthread state.
For the kproc case, this required moving the logic to set these flags
from kproc_create() into do_fork().
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29207
POSIX states that new threads created via pthread_create() should
inherit the "floating point environment" from the creating thread.
Discussed with: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29204
- Use update_pcb_bases() when updating FS or GS base addresses to
permit use of FSBASE and GSBASE in Linux processes. This also sets
PCB_FULL_IRET. linux32 was setting PCB_32BIT which should be a
no-op (exec sets it).
- Remove write-only variables to construct unused segment descriptors
for linux32.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29026
Before the pcb is copied to the new thread during cpu_fork() and
cpu_copy_thread(), the kernel re-reads the current register values in
case they are stale. This is done by setting PCB_FULL_IRET in
pcb_flags.
This works fine for user threads, but the creation of kernel processes
and kernel threads do not follow the normal synchronization rules for
pcb_flags. Specifically, new kernel processes are always forked from
thread0, not from curthread, so adjusting pcb_flags via a simple
instruction without the LOCK prefix can race with thread0 running on
another CPU. Similarly, kthread_add() clones from the first thread in
the relevant kernel process, not from curthread. In practice, Netflix
encountered a panic where the pcb_flags in the first kthread of the
KTLS process were trashed due to update_pcb_bases() in
cpu_copy_thread() running from thread0 to create one of the other KTLS
threads racing with the first KTLS kthread calling fpu_kern_thread()
on another CPU. In the panicking case, the write to update pcb_flags
in fpu_kern_thread() was lost triggering an "Unregistered use of FPU
in kernel" panic when the first KTLS kthread later tried to use the
FPU.
Reported by: gallatin
Discussed with: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29023
This should allow the test to pass in Jenkins. Testing it locally now
reports "passed" instead of "invalid TAP data".
While touching this file also fix some shellcheck warnings that were
pointed out by my IDE.
Reviewed By: lwhsu, afedorov
Differential Revision: https://reviews.freebsd.org/D29054
With an out-of-tree Clang, we can use the -resource-dir flag when linking
to point it at the runtime libraries from the current SYSROOT.
This moves the path to the clang-internal library directory to a separate
.mk file that can be used by Makefiles that want to find the sanitizer
libraries. I intend to re-use this .mk file for my upcoming changes that
allow building the entire base system with ASAN/UBSAN/MSAN.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28852
Update the tests to check O_RESOLVE_BENEATH instead.
If this looks reasonable, I'll try to upstream this change.
This keeps a compat fallback for O_BENEATH since the Linux port still
has/had O_BENEATH with "no .., no absolute paths" semantics.
Test Plan: `/usr/tests/sys/capsicum/capsicum-test -u 977` passes and
runs the O_RESOLVE_BENEATH tests.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D29016
The existing code masked off all bits that it didn't know about. To be
future-proof, we should save and restore the entire fpcr/fpsr registers.
Additionally, the existing fesetenv() was incorrectly setting the rounding
mode in fpsr instead of fpcr.
This patch stores fpcr in the high 32 bits of fenv_t and fpsr in the low
bits instead of trying to interleave them in a single 32-bit field.
Technically, this is an ABI break if you re-compile parts of your code or
pass a fenv_t between DSOs that were compiled with different versions
of fenv.h. However, I believe we should fix this since the existing code
was broken and passing fenv_t across DSOs should rarely happen.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D29160
When an automounted filesystem is successfully unmounted, call
rpc.umntall(8) with the -k flag.
rpc.umntall(8) is used to clean up /var/db/mounttab on the client and
/var/db/mountdtab on the server. This is only useful for NFSv3.
PR: 251906
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D27801
For native FreeBSD binaries, the return value from __getcwd(2)
doesn't really matter, as the libc wrapper takes over and returns
the proper errno.
PR: kern/254120
Reported By: Alex S <iwtcex@gmail.com>
Reviewed By: kib
Sponsored By: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29217
swi_remove() removes the software interrupt handler but does not remove
the associated interrupt event.
This is visible when creating and remove a vnet jail in `procstat -t
12`.
We can remove it manually with intr_event_destroy().
PR: 254171
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29211
We can now counter_u64_free(NULL), so remove the checks.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29190
While here also document that for counter_u64_free().
Reviewed by: rpokala@
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29215
We already allow free(NULL) and uma_zfree(..., NULL). Make
uma_zfree_pcpu(..., NULL) work as well.
This also means that counter_u64_free(NULL) will work.
These make cleanup code simpler.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29189
We might own the last use reference, and then vrele() at the end would
need to take the dvp vnode lock to inactivate, which causes deadlock
with vp. We cannot vrele() dvp from start since this might unlock ldvp.
Handle it by holding the vnode and dropping use ref after lowerfs
VOP_VPUT_PAIR() ended. This effectivaly requires unlock of the vp vnode
after VOP_VPUT_PAIR(), so the call is changed to set unlock_vp to true
unconditionally. This opens more opportunities for vp to be reclaimed,
if lvp is still alive we reinstantiate vp with null_nodeget().
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Nullfs vnode which shares vm_object and pages with the lower vnode should
not be exempt from the reclaim just because lower vnode cached a lot.
Their reclamation is actually very cheap and should be preferred over
real fs vnodes, but this change is already useful.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
Other threads observing the non-NULL um_softdep can assume that it is
safe to use it. This is important for ro->rw remounts where change from
read-only to read-write status cannot be made atomic.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
otherwise we might follow a pointer in the freed memory.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29178
