It's redundant at the moment since it can be obtained from the trapframe
on the architectures where DTrace is supported, but this won't be the case
with ARM.
Resizing a ZFS ZVOL with debug enabled would result in a panic due to
recursion on dp_config_rwlock.
The upstream change "3464 zfs synctask code needs restructuring" changed
zvol_set_volsize to avoid the recursion on dp_config_rwlock, but this was
missed when originally merged in by r248571 due to significant differences
in our codebases in this area.
These changes also relied on bring in changes from upstream:
3557 dumpvp_size is not updated correctly when a dump zvol's size is
changed, which where also not present.
In order to help prevent future issues in this area a direct comparison
and diff minimisation from current upstream version (b515258) of zvol.c.
Differential Revision: https://reviews.freebsd.org/D1302
MFC after: 1 month
X-MFC-With: r276063 & r276066
Sponsored by: Multiplay
Use #define zfsdev_state_lock spa_namespace_lock instead of replacing all
zfsdev_state_lock with spa_namespace_lock to minimise changes from upstream.
Differential Revision: D1302
MFC after: 1 month
X-MFC-With r276063
Sponsored by: Multiplay
Also correct as per style(9) on the use of #ifdef comments.
This is a no-op change as pre-cursor to a full cleanup and merge with
upstream zvol changes.
Sponsored by: Multiplay
kernel does not panic with zfs_panic_recover.
Illumos issue:
5438 zfs_blkptr_verify should continue after zfs_panic_recover
Reported by: Coverity
CID: 1232014
As of r270383, the dbuf_compare comparator compares the dbuf
attributes in the following order:
db_level (indirect level)
db_blkid (block number)
db_state (current state)
the address of the element
Because db_state is being considered before the element's state,
changing of db_state would affect balancedness of the AVL tree,
even when the address of element compares differently. For
instance, in dbuf_create, db_state may be altered after the
node is inserted into the AVL tree and may break AVL tree
balancedness.
Instead of using db_state as a comparision critera (introduced
in r270383), consider it only when we are doing a lookup, that
is one of the two dbuf pointers contains DB_SEARCH.
Illumos issue:
5422 preserve AVL invariants in dn_dbufs
MFC after: 2 weeks
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Convert ARC flags to use enum. Previously, public flags are defined in
arc.h and private flags are defined in arc.c which can lead to confusion
and programming errors.
Consistently use 'hdr' (when referencing arc_buf_hdr_t) instead of 'buf'
or 'ab' because arc_buf_t are often named 'buf' as well.
Illumos issue:
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
MFC after: 2 weeks
Remove "dbuf phys" db->db_data pointer aliases.
Use function accessors that cast db->db_data to the appropriate
"phys" type, removing the need for clients of the dmu buf user
API to keep properly typed pointer aliases to db->db_data in order
to conveniently access their data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
In zap_leaf() and zap_leaf_byteswap, now that the pointer alias
field l_phys has been removed, use the db_data field in an on
stack dmu_buf_t to point to the leaf's phys data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
Remove the db_user_data_ptr_ptr field from dbuf and all logic
to maintain it.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dnode.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dbuf.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
Modify the DMU buf user API to remove the ability to specify
a db_data aliasing pointer (db_user_data_ptr_ptr).
cddl/contrib/opensolaris/cmd/zdb/zdb.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_diff.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_send.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_traverse.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_tx.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_bookmark.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deadlist.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deleg.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_destroy.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_pool.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_scan.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_synctask.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_userhold.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_history.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Create and use the new "phys data" accessor functions
dsl_dir_phys(), dsl_dataset_phys(), zap_m_phys(),
zap_f_phys(), and zap_leaf_phys().
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Remove now unused "phys pointer" aliases to db->db_data
from clients of the DMU buf user API.
Illumos issue:
5314 Remove "dbuf phys" db->db_data pointer aliases in ZFS
MFC after: 2 weeks
In addition to r273158, make the code in spa_sync() that checks if the
current TXG is a no-op TXG less fragile.
Illumos issue:
5347 idle pool may run itself out of space
MFC after: 2 weeks
Add a loader tunable, vfs.zfs.arc_meta_min, which controls how much metadata
ZFS should keep in ARC at minimum.
In arc_evict(), when doing recycle, take more factors into account by
applying the following policy:
1. If no evictable data, evict metadata;
2. If no evictable metadata, evict data;
3. If we hit arc_meta_limit, evict metadata;
4. If we haven't hit arc_meta_min, evict data;
5* (Illumos only, not present in new FreeBSD code, yet) evict the oldest
cached element from data and metadata.
(FreeBSD) evict the data type specified by caller, which is the
existing behavior.
Note that because of our splitted locks (implemented in r205231 to improve
scalability by reducing lock contention), implementing the fifth Illumos
behavior will not be cheap, so for now just implement the 1-4 and fall back
to current behavior for 5.
Illumos issue:
5368 ARC should cache more metadata
MFC after: 2 months (assuming we didn't found better solution)
Expose arc_meta_limit, et al via kstats.
Note that as a result, vfs.zfs.arc_meta_used is removed.
The existing vfs.zfs.arc_meta_limit sysctl/tunable is retained
with a SYSCTL_PROC wrapper.
Illumos ZFS issues:
3561 arc_meta_limit should be exposed via kstats
Relnotes: yes
MFC after: 2 weeks
Verify that the block pointer is structurally valid, before attempting to
read it in. It can only be invalid in the case of a ZFS bug, but this
change will help identify such bugs in a more transparent way, by
panic'ing with a relevant message, rather than indexing off the end of an
array or something.
Illumos issue:
5349 verify that block pointer is plausible before reading
MFC after: 2 weeks
Reduce scrub activities when system there is enough dirty data, namely when
dirty data is more than zfs_vdev_async_write_active_min_dirty_percent (once
we start to increase the number of concurrent async writes).
While there also correct rounding error which would make scrub end up
pausing for (zfs_txg_timeout + 1) seconds instead of the desired
zfs_txg_timeout seconds.
Illumos issue:
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
MFC after: 2 weeks
If zio_checksum_error() returns other than ECKSUM (e.g. EINVAL), it does not
fill in the "zio_bad_cksum_t *info" parameter. Caller should not attempt to
use it in this case.
Illumos issue:
5348 zio_checksum_error() only fills in info if ECKSUM
MFC after: 2 weeks
If a dnode has a spill block and there is an error while accessing
a data block then traverse_dnode() loses information about that error
and returns a status of visiting the spill block.
This issue is discovered by Spectra Logic.
Illumos issue:
5311 traverse_dnode may report success when it should not
Original author: gibbs
MFC after: 2 weeks
When importing a pool, don't assume that the passed pool configuration
at vdev_load is always vaild. It's possible that a stale configuration
that comes with extra vdevs, where metaslab_init() would fail because
of lower layer returns error.
Change the code to make metaslab_init() handle and return errors from
lower layer and pass it back to upper layer and handle it there.
Illumos issue:
5213 panic in metaslab_init due to space_map_open returning ENXIO
MFC after: 2 weeks
In the old days callout(9) had 1 tick precision and that was inadequate
for some uses, e.g. DTrace profile module, so we had to emulate cyclic
API and behavior. Now we can directly use callout(9) in the very few
places where cyclic was used.
Differential Revision: https://reviews.freebsd.org/D1161
Reviewed by: gnn, jhb, markj
MFC after: 2 weeks
In dsl_dataset_hold_obj() we used zap_contains(.., DS_FIELD_LARGE_BLOCKS)
to determine whether the extensible (zapifyed) dataset have large blocks.
The code expects the result be either 0 (found) or ENOENT (not found),
however reused the variable 'err' which later code expects to be 0.
Fix this by adopting similar code construct that is used later for
DS_FIELD_BOOKMARK_NAMES, which uses a temporary variable zaperr to catch
errors from zap_* rountines.
Reported by: Peter J. Creath (on FreeNAS; FreeNAS bug #6848)
Illumos issue: 5393 spurious failures from dsl_dataset_hold_obj()
Reviewed by: mahrens
Sponsored by: iXsystems, Inc.
X-MFC with: r274337
It is implemented for LUNs backed by ZVOLs in "dev" mode and files.
GEOM has no such API, so for LUNs backed by raw devices all LBAs will
be reported as mapped/unknown.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
In file included from cddl/contrib/opensolaris/common/ctf/ctf_create.c:31:
In file included from sys/cddl/contrib/opensolaris/uts/common/sys/sysmacros.h:34:
sys/cddl/contrib/opensolaris/uts/common/sys/isa_defs.h:334:9: warning: '_ILP32' macro redefined [-Wmacro-redefined]
#define _ILP32
^
<built-in>:26:9: note: previous definition is here
#define _ILP32 1
^
1 warning generated.
This is because clang 3.5.0 started predefining _ILP32 and __ILP32__ for
the i386 arch. (Earlier versions already predefined _LP64 and __LP64__
for the x86_64 arch.)
Reviewed by: emaste, avg, smh, delphij, markj
Differential Revision: https://reviews.freebsd.org/D1187
This rounding up was lost in a mismerge of illumos code.
See r268075 MFV r267565.
After that commit zio_compress_data() no longer performs any compressed
size adjustment, so it needs to be done externally. On FreeBSD we round
up the size using vdev_ashift rather than SPA_MINBLOCKSIZE so that 4KB
devices are properly supported.
Additionally, zero out the buffer tail only if compression succeeds.
The compression is considered successful if the size of compressed
data after rounding up to account for the vdev ashift is less than the
original data size. It does not make sense to have the data compressed
if all the savings are lost to rounding up.
With the new zio_compress_data() it could have been possible that the
rounded compressed size would be greater than the original size and thus
we could zero beyond the allocated buffer if the zeroing code was kept
at the original place.
Discussed with: delphij, gibbs
MFC after: 2 weeks
X-MFC with: r274627
Size of physical ZIOs must never be implicitly adjusted, it's
a responsibility of a caller to make sure that such a ZIO has proper offset
and size.
Discussed with: delphij, gibbs
MFC after: 2 weeks
After r265152 TRIM requests are ZIO_TYPE_FREE instead of ZIO_TYPE_IOCTL
this meant file backed vdevs to attempted to process the ZIO as a write
causing a panic.
We now disable TRIM on file backed vdevs and ASSERT the ZIO types supported
by each vdev type to ensure we explicity support the ZIO type being
processed.
Also ensure that TRIM on init is not procesed for devices which declare they
didn't support TRIM via vdev_notrim.
PR: 195061, 194976, 191573
Sponsored by: Multiplay
have both kern_open() and kern_openat(); change the callers to use
kern_openat().
This removes one (sometimes two) levels of indirection and
consolidates arguments checks.
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ZFS large block support.
Please note that booting from datasets that have recordsize greater
than 128KB is not supported (but it's Okay to enable the feature on
the pool). This *may* remain unchanged because of memory constraint.
Limited safety belt is provided for mounted root filesystem but use
caution is advised.
Illumos issue:
5027 zfs large block support
MFC after: 1 month
We have observed that arc_release() can be called concurrently with a
l2arc in-flight write.
Also, we have observed that arc_hdr_destroy() can be called from
arc_write_done() for a zio with ZIO_FLAG_IO_REWRITE flag in similar
circumstances.
Previously the l2arc headers would be freed while leaking their
associated compression buffers. Now the buffers are placed on
l2arc_free_on_write list for delayed freeing. This is similar to what
was already done to arc buffers that were supposed to be freed
concurrently with in-flight writes of those buffers.
In addition to fixing the discovered leaks this change also adds some
protective code to assert that a compression buffer associated with a
l2arc header is never leaked.
A new kstat l2_cdata_free_on_write is added. It keeps a count of
delayed compression buffer frees which previously would have been leaks.
Tested by: Vitalij Satanivskij <satan@ukr.net> et al
Requested by: many
MFC after: 2 weeks
Sponsored by: HybridCluster / ClusterHQ
For ZVOL-backed LUNs this allows to inform initiators if storage's used or
available spaces get above/below the configured thresholds.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
crash.sh script attached to FreeNAS bug 4109:
https://bugs.freenas.org/issues/4109
Three are in the snapshot layer:
a) AVG explains in his notes: https://wiki.freebsd.org/AvgVfsSolarisVsFreeBSD
"VOP_INACTIVE must not do any destructive actions to a vnode
and its filesystem node, nor invalidate them in any way."
gfs_vop_inactive and zfsctl_snapshot_inactive did just that. In
OpenSolaris VOP_INACTIVE is much closer to FreeBSD's VOP_RECLAIM.
Rename & move them to gfs_vop_reclaim and zfsctl_snapshot_reclaim
and merge in the requisite vnode_destroy from zfsctl_common_reclaim.
b) gfs_lookup_dot and various zfsctl functions do not honor the
FreeBSD VFS convention of only locking from the root downward. When
looking up ".." the convention is to drop the current leaf vnode lock before
acquiring the directory vnode and then subsequently re-acquiring the lock on the
leaf vnode. This fixes that in all the places that our exercised by crash.sh.
c) The snapshot may already be unmounted when the directory vnode is reclaimed.
Check for this case and return.
One in the common layer:
d) Callers of traverse expect the reference to the vnode passed in to be
maintained. Don't release it.
This last one may be an unclear contract. There may in fact be some callers that
do expect the reference to be dropped on success in addition to callers that
expect it to be released. In this case a further audit of the callers is needed
and a consensus on the correct behavior.
PR: 184677
Submitted by: kmacy
Reviewed by: delphij, will, avg
MFC after: 2 weeks
Sponsored by: iXsystems
* Use a constant to define the number of stack frames in a probe exception.
* Only allow function symbols in powerpc64 ('.' prefixed)
* Set the fbtp_roffset for return probes, so the correct dtrace_probe call is
made.
MFC after: 1 week
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
