last in the list rather than first.
This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x). This
also means that the pci code will once again print the resources in BAR
ascending order.
w/o problems than I was before... This simply brings back the knote_delete
as knlist_delete which will also drop the knote's, instead of just clearing
the list and seeing _ONESHOT...
Fix a race where if a note was _INFLUX and _DETACHED, it could end up being
modified... whoopse..
MFC after: 1 week
Prodded by: ambrisko and dwhite
alignment restrictive, and help performance on some ethernet cards which
currently copy the entire packet a couple bytes to get the packet aligned
properly...
Wordsmithing by: dwhite
Obtained from: NetBSD (code only)
I'll clean it up later: rwatson
in the window between the beginning of panic() and entering the debugger,
it's possible to receive interrupts. If we receive an interrupt, don't
preempt if panicstr != NULL, as the system is in the process of failing, and
the preempting thread is likely to stumble over the failure. The typical
scenario is during the printf() in panic() prior to entering the debugger,
but when running with a slower console type such as serial console.
It could be that the panic string should be passed to the debugger to print,
so that it can run from the debugger's environment rather than a regular
kernel printf.
Glanced at by: jhb
session in tprintf(). SESSRELE() needs to properly dispose of the
sessions mutex.
Add sessrele() which does the proper cleanup and have SESSRELE() call it.
Use SESSRELE also in pgdelete().
Found by: Coverity (ID:526)
it to get better hashing in vfs_hash.
In case of an insert collision in vfs_hash_insert(), put the loosing vnode
on a special list so that vfs_hash_remove() can just assume that it is on
a list.
Drop the VI_HASHED flag.
instead of failing.
When looking for a region to allocate, we used to check to see if the
start address was < end. In the case where A..B is allocated already,
and one wants to allocate A..C (B < C), then this test would
improperly fail (which means we'd examine that region as a possible
one), and we'd return the region B+1..C+(B-A+1) rather than NULL.
Since C+(B-A+1) is necessarily larger than C (end argument), this is
incorrect behavior for rman_reserve_resource_bound().
The fix is to exclude those regions where r->r_start + count - 1 > end
rather than r->r_start > end. This bug has been in this code for a
very long time. I believe that all other tests against end are
correctly done.
This is why sio0 generated a message about interrupts not being
enabled properly for the device. When fdc had a bug that allocated
from 0x3f7 to 0x3fb, sio0 was then given 0x3fc-0x404 rather than the
0x3f8-0x3ff that it wanted. Now when fdc has the same bug, sio0 fails
to allocate its ports, which is the proper behavior. Since the probe
failed, we never saw the messed up resources reported.
I suspect that there are other places in the tree that have weird
looping or other odd work arounds to try to cope with the observed
weirdness this bug can introduce. These workarounds should be located
and eliminated.
Minor debug write fix to match the above test done as well.
'nice' by: mdodd
Sponsored by: timing solutions (http://www.timing.com/)
- Move VSHOULDBUSY, VSHOULDFREE, and VTRYRECYCLE into vfs_subr.c so
no one else attempts to grow a dependency on them.
- Now that objects with pages hold the vnode we don't have to do unlocked
checks for the page count in the vm object in VSHOULDFREE. These three
macros could simply check for holdcnt state transitions to determine
whether the vnode is on the free list already, but the extra safety
the flag affords us is probably worth the minimal cost.
- The leafonly sysctl and code have been dead for several years now,
remove the sysctl and the code that employed it from vtryrecycle().
- vtryrecycle() also no longer has to check the object's page count as
the object holds the vnode until it reaches 0.
Sponsored by: Isilon Systems, Inc.
to get from (mount + inode) to vnode. These tables are mostly
copy&pasted from UFS, sized based on desiredvnodes and therefore
quite large (128K-512K). Several filesystems are buggy enough that
they allocate the hash table even before they know if they will
ever be used or not.
Add "vfs_hash", a system wide hash table, which will replace all
the per-filesystem hash-tables.
The fields we add to struct vnode will more or less be saved in
the respective filesystems inodes.
Having one central implementation will save code and will allow us
to justify the complexity of code to dynamically (re)size the hash
at a later point.
to use only the holdcnt to determine whether a vnode may be recycled,
simplifying the V* macros as well as vtryrecycle(), etc.
Sponsored by: Isilon Systems, Inc.
vtryrecycle(). All obj refs also ref the vnode.
- Consistently use v_incr_usecount() to increment the usecount. This will
be more important later.
Sponsored by: Isilon Systems, Inc.
on an unlinked file. We can't know if this is the case until after we
have the lock.
- Lock the vnode in vn_close, many filesystems had code which was unsafe
without the lock held, and holding it greatly simplifies vgone().
- Adjust vn_lock() to check for the VI_DOOMED flag where appropriate.
Sponsored by: Isilon Systems, Inc.
- Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do
writing ops without suspending. This could suspend the vlruproc which
should not be a problem under normal circumstances.
- Manually implement VMIGHTFREE in vlrureclaim as this was the only instance
where it was used.
- Acquire a lock before calling vgone() as it now requires it.
- Move the acquisition of the vnode interlock from vtryrecycle() to
getnewvnode() so that if it fails we don't drop and reacquire the
vnode_free_list_mtx.
- Check for a usecount or holdcount at the end of vtryrecycle() in case
someone grabbed a ref while we were recycling. Abort the recycle, and
on the final ref drop this vnode will be placed on the head of the free
list.
- Move the redundant VOP_INACTIVE protection code into the local
vinactive() routine to avoid code bloat.
- Keep the vnode lock held across calls to vgone() in several places.
- vgonel() no longer uses XLOCK, instead callers must hold an exclusive
vnode lock. The VI_DOOMED flag is set to allow other threads to detect
a vnode which is no longer valid. This flag is set until the last
reference is gone, and there are no chances for a new ref. vgonel()
holds this lock across the entire function, which greatly simplifies
logic.
_ Only vfree() in one place in vgone() not three.
- Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock
in the LK_NOWAIT case. In other cases, check after we have slept and
acquired an exlusive lock. This will simulate the old vx_wait()
behavior.
Sponsored by: Isilon Systems, Inc.
so that the socket lock is held over the test-and-set removal of the
accept filter option during connect, and the two socket mutex regions
(transition to connected, perform accept filter) are combined.
from uipc_socket.c to uipc_accf.c in do_getopt_accept_filter(), so that it
now matches do_setopt_accept_filter(). Slightly reformulate the logic to
match the optimistic allocation of storage for the argument in advance,
and slightly expand the coverage of the socket lock.
socket lock around knlist_init(), so don't.
Hard code the setting of the socket reference count to 1 rather than
using soref() to avoid asserting the socket lock, since we've not yet
exposed the socket to other threads.
This removes two mutex operations from each socket allocation.
so that the socket does not generate SIGPIPE, only EPIPE, when a write
is attempted after socket shutdown. When the option was introduced in
2002, this required the logic for determining whether SIGPIPE was
generated to be pushed down from dofilewrite() to the socket layer so
that the socket options could be considered. However, the change in
2002 omitted modification to soo_write() required to add that logic,
resulting in SIGPIPE not being generated even without SO_NOSIGPIPE when
the socket was written to using write() or related generic system calls.
This change adds the EPIPE logic to soo_write(), generating a SIGPIPE
signal to the process associated with the passed uio in the event that
the SO_NOSIGPIPE option is not set.
Notes:
- The are upsides and downsides to placing this logic in the socket
layer as opposed to the file descriptor layer. This is really fd
layer logic, but because we need so_options, we have a choice of
layering violations and pick this one.
- SIGPIPE possibly should be delivered to the thread performing the
write, not the process performing the write.
- uio->uio_td and the td argument to soo_write() might potentially
differ; we use the thread in the uio argument.
- The "sigpipe" regression test in src/tools/regression/sockets/sigpipe
tests for the bug.
Submitted by: Mikko Tyolajarvi <mbsd at pacbell dot net>
Talked with: glebius, alfred
PR: 78478
MFC after: 1 week
SIGPIPE signal for the duration of the sento-family syscalls. Use it to
replace previously added hack in Linux layer based on temporarily setting
SO_NOSIGPIPE flag.
Suggested by: alfred
Add support for passing in a mutex. If NULL is passed a global
subr_unit mutex is used.
Add alloc_unrl() which expects the mutex to be held.
Allocating a unit will never sleep as it does not need to allocate
memory.
Cut possible range in half so we can use -1 to mean "out of number".
Collapse first and last runs into the head by means of counters.
This saves memory in the common case(s).
at some point result in a status event being triggered (it should
be a link down event: the Microsoft driver design guide says you
should generate one when the NIC is initialized). Some drivers
generate the event during MiniportInitialize(), such that by the
time MiniportInitialize() completes, the NIC is ready to go. But
some drivers, in particular the ones for Atheros wireless NICs,
don't generate the event until after a device interrupt occurs
at some point after MiniportInitialize() has completed.
The gotcha is that you have to wait until the link status event
occurs one way or the other before you try to fiddle with any
settings (ssid, channel, etc...). For the drivers that set the
event sycnhronously this isn't a problem, but for the others
we have to pause after calling ndis_init_nic() and wait for the event
to arrive before continuing. Failing to wait can cause big trouble:
on my SMP system, calling ndis_setstate_80211() after ndis_init_nic()
completes, but _before_ the link event arrives, will lock up or
reset the system.
What we do now is check to see if a link event arrived while
ndis_init_nic() was running, and if it didn't we msleep() until
it does.
Along the way, I discovered a few other problems:
- Defered procedure calls run at PASSIVE_LEVEL, not DISPATCH_LEVEL.
ntoskrnl_run_dpc() has been fixed accordingly. (I read the documentation
wrong.)
- Similarly, the NDIS interrupt handler, which is essentially a
DPC, also doesn't need to run at DISPATCH_LEVEL. ndis_intrtask()
has been fixed accordingly.
- MiniportQueryInformation() and MiniportSetInformation() run at
DISPATCH_LEVEL, and each request must complete before another
can be submitted. ndis_get_info() and ndis_set_info() have been
fixed accordingly.
- Turned the sleep lock that guards the NDIS thread job list into
a spin lock. We never do anything with this lock held except manage
the job list (no other locks are held), so it's safe to do this,
and it's possible that ndis_sched() and ndis_unsched() can be
called from DISPATCH_LEVEL, so using a sleep lock here is
semantically incorrect. Also updated subr_witness.c to add the
lock to the order list.
asynchronously by different threads. Thus, declare as volatile the
reference count that is accessed through m_ext's pointer, ref_cnt.
Revert the previous change, revision 1.144, that casts as volatile a
single dereference of ref_cnt.
Reviewed by: bmilekic, dwhite
Problem reported by: kris
MFC after: 3 days
for a signal, because kernel stack is swappable, this causes page fault
in kernel under heavy swapping case. Fix this bug by eliminating unneeded
code.
create kernel threads and call rfork(2) with RFTHREAD flag set in this case,
which puts parent and child into the same threading group. As a result
all threads that belong to the same program end up in the same threading
group.
This is similar to what linuxthreads port does, though in this case we don't
have a luxury of having access to the source code and there is no definite
way to differentiate linux_clone() called for threading purposes from other
uses, so that we have to resort to heuristics.
Allow SIGTHR to be delivered between all processes in the same threading
group previously it has been blocked for s[ug]id processes.
This also should improve locking of the same file descriptor from different
threads in programs running under linux compat layer.
PR: kern/72922
Reported by: Andriy Gapon <avg@icyb.net.ua>
Idea suggested by: rwatson
place.
This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.
By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild. Extension to other compilers is supposed
to be possible, of course.
Submitted by: netchild
Reviewed by: various developers on arch@, some time ago
sleeping, so in do_tdsignal, we no longer need to test td_waitset.
now td_waitset is only used to give a thread higher priority when
delivering signal to multithreads process.
This also fixes a bug:
when a thread in sigwait states was suspended and later resumed
by SIGCONT, it can no longer receive signals belong to waitset.
debug.cpufreq.lowest tunable and sysctl. Some systems seem to have problems
with the lowest frequencies so setting this prevents them from being
available or used.
owned by a process when it forks, and creates a matching set of references
for the child process, as prescribed by POSIX.
In order to avoid races with other threads in the parent process during
fork(), it is necessary to allocate a temporary reference list while
holding the sem_lock, then transfer those references to the new process
once the sem_lock is released. The implementation is inefficient but
appears functional; in order to improve the efficiency, it will be
necessary to modify the existing structures and logic, which generally
rely on O(n) operations over the global set of semaphores.
PAGE_SIZE.
Unlike originator of the PR suggests retain MAXSHELLCMDLEN definition
(he has been proposing to replace it with PAGE_SIZE everywhere), not only
this reduced the diff significantly, but prevents code obfuscation and also
allows to increase/decrease this parameter easily if needed.
PR: kern/64196
Submitted by: Magnus Bäckström <b@etek.chalmers.se>
doesn't change functionality, but makes code more logical.
Obtained from: DrafonFlyBSD
o Use VOP_GETATTR() to obtain actual size of file and parse no more than that.
Previously, we parsed MAXSHELLCMDLEN characters regardless of the actual file
size. This makes the following working:
$ printf '#!/bin/echo' > /tmp/test.sh
$ chmod 755 /tmp/test.sh
$ /tmp/test.sh
Previously, attempts to execve() that shell script has been failing with bogus
ENAMETOOLONG.
PR: kern/64196
Submitted by: Magnus B.ckstr.m <b@etek.chalmers.se>
script. Otherwise it's possible to panic kernel by constructing a shell
script with first line not ending in '\n'.
Also, treat '\0' as line terminating character, which may me useful in
some situations.
Submitted by: gad
when trim'ing space off the back of a chain; this is indirect
solution to a potential null ptr deref
Noticed by: Coverity Prevent analysis tool (null ptr deref)
Reviewed by: dg, rwatson
vn_extattr_rm. This is meant to catch conditions where IO_NODELOCKED
has been specified without the vnode being locked.
Discussed with: rwatson
MFC after: 1 week
object on to the zone allocator. It should be noted that uma_zalloc(9)
uses bzero to zero out the object so there probably wont be any
real performance benefit. If UMA grows the ability to supply
zeroed zones more efficiently in the future, we will not have to
modify all the existing consumers.
Discussed with: rwatson,julian
MFC after: 1 week
has been set. Assert that this is the case so that we catch filesystems
who are using naked VOP_LOCKs in illegal cases.
Sponsored by: Isilon Systems, Inc.
