Commit Graph

117 Commits

Author SHA1 Message Date
Alexander Motin
d38c0e53a8 MFprojects/camlock r249541:
Give periph validity flag own periph reference.  That slightly simplifies
the release logic and covers hypothetical case if lock is dropped inside
the periph_oninval() method.
2013-04-27 12:39:28 +00:00
Alexander Motin
cccf422080 MFprojects/camlock r248890, r248897, r248898, r248900, r248903, r248905,
r248917, r248918, r248978, r249001, r249014, r249030:

Remove multilevel freezing mechanism, implemented to handle specifics of
the ATA/SATA error recovery, when post-reset recovery commands should be
allocated when queues are already full of payload requests.  Instead of
removing frozen CCBs with specified range of priorities from the queue
to provide free openings, use simple hack, allowing explicit CCBs over-
allocation for requests with priority higher (numerically lower) then
CAM_PRIORITY_OOB threshold.

Simplify CCB allocation logic by removing SIM-level allocation queue.
After that SIM-level queue manages only CCBs execution, while allocation
logic is localized within each single device.

Suggested by:	gibbs
2013-04-14 09:28:14 +00:00
Alexander Motin
dcdf6e7418 MFprojects/camlock:
r249017:
Some cosmetic things:
 - Unify device to target insertion inside xpt_alloc_device() instead of
duplicating it three times.
 - Remove extra checks for empty lists of devices and targets on release
since zero refcount check also implies it.
 - Reformat code to reduce indentation.

r249103:
 - Add lock assertions to every point where reference counters are modified.
 - When reference counters are reaching zero, add assertions that there are
no children items left.
 - Add a bit more locking to the xptpdperiphtraverse().
2013-04-04 20:31:40 +00:00
Edward Tomasz Napierala
9e0d30e20d Fix panic in the error path caused by recursive acquisition of XPT topology
lock.

Reviewed by:	ken
2013-04-02 09:38:04 +00:00
Konstantin Belousov
e81ff91e62 Do not remap usermode pages into KVA for physio.
Sponsored by:	The FreeBSD Foundation
Tested by:	pho
2013-03-19 14:43:57 +00:00
Konstantin Belousov
b4862fafd5 Assert that a ccb passed to cam_periph_mapmem() for XPT_SCSI_IO and
XPT_ATA_IO holds virtual buffer address.

Sponsored by:	The FreeBSD Foundation
Tested by:	pho
2013-03-19 13:10:14 +00:00
Kenneth D. Merry
33a38f7453 Fix a panic during CAM EDT traversal.
The problem was a race condition between the EDT traversal used by
things like 'camcontrol devlist', and CAM peripheral driver
removal.

The EDT traversal code holds the CAM topology lock, and wants
to show devices that have been invalidated.  It acquires a
reference to the peripheral to make sure the peripheral it is
examining doesn't go away.

However, because the peripheral removal code in camperiphfree()
drops the CAM topology lock to call the peripheral's destructor
routine, we can run into a situation where the EDT traversal
increments the peripheral reference count after free process is
already in progress.  At that point, the reference count is
ignored, because it was 0 when we started the process.

Fix this race by setting a flag, CAM_PERIPH_FREE, that I previously
added and checked in xptperiphtraverse() and xptpdperiphtravsere(),
but failed to use.  If the EDT traversal code sees that flag,
it will know that the peripheral free process has already started,
and that it should not access that peripheral.

Also, fix an inconsistency in the locking between
xptpdperiphtraverse() and xptperiphtraverse().  They now both
hold the CAM topology lock while calling the peripheral traversal
function.

cam_xpt.c:	Change xptperiphtraverse() to hold the CAM topology
		lock across calls to the traversal function.

		Take out the comment in xptpdperiphtraverse() that
		referenced the locking inconsistency.

cam_periph.c:	Set the CAM_PERIPH_FREE flag when we are in the
		process of freeing a peripheral driver.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2012-12-07 23:48:54 +00:00
Alexander Motin
f8ff57d287 Add explicit check for not set time inside cam_periph_freeze_after_event().
System time is set later on boot process then initial bus scan by CAM.
Until that moment microtime() is equal to microuptime(), and if system
boots quickly, the value can be close to zero. That causes settle time
waiting even for buses that don't use reset during probe.

On my test system this reduces boot time by 1 second if USB enabled, or
by 4 seconds if USB disabled.  CAM waited for ctl2cam0 bus "settle".
2012-10-14 08:50:05 +00:00
Alexander Motin
3631c6382f Implement media change notification for DA and CD removable media devices.
It includes three parts:
 1) Modifications to CAM to detect media media changes and report them to
disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes
Asynchronous Notification mechanism to receive events from hardware.
Active polling with TEST UNIT READY commands with 3 seconds period is used
for incapable hardware. After that both CD and DA drivers work the same way,
detecting two conditions: "NOT READY: Medium not present" after medium was
detected previously, and "UNIT ATTENTION: Not ready to ready change, medium
may have changed". First one reported to disk(9) as media removal, second
as media insert/change. To reliably receive second event new
AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by
generic error handling code in cam_periph_error().
 2) Modifications to GEOM core to handle media remove and change events.
Media removal handled by spoiling all consumers attached to the provider.
Media change event also schedules provider retaste after spoiling to probe
new media. New flag G_CF_ORPHAN was added to consumers to reflect that
consumer is in process of destruction. It allows retaste to create new
geom instance of the same class, while previous one is still dying.
 3) Modifications to some GEOM classes: DEV -- to report media change
events to devd; VFS -- to handle spoiling same as orphan to prevent
accessing replaced media. PART class already handles spoiling alike to
orphan.

Reviewed by:	silence on geom@ and scsi@
Tested by:	avg
Sponsored by:	iXsystems, Inc. / PC-BSD
MFC after:	2 months
2012-07-29 11:51:48 +00:00
Kenneth D. Merry
905cb85d78 Fix a typo in a panic() call.
PR:		kern/169497
Submitted by:	Steven Hartland <steven.hartland@multiplay.co.uk>
MFC after:	3 days
2012-06-28 03:36:13 +00:00
Alexander Motin
e7493b2841 Add scsi_extract_sense_ccb() -- wrapper around scsi_extract_sense_len().
It allows to remove number of duplicate checks from several places.
2012-06-23 12:32:53 +00:00
Alexander Motin
84c4de2d47 Don't print SCSI Queue Full and CAM_REQUEUE_REQ statuses as errors if they
were handled and retried. They are part of normal operation for SCSI TCQ.

MFC after:	3 days
2012-06-22 16:20:13 +00:00
Alexander Motin
aed9c88cff Make cam_periph_hold() behavior consistent: drop taken reference and
return ENXIO if periph was invalidated while we were waiting for it.

MFC after:	1 week
2012-06-21 15:14:51 +00:00
Kenneth D. Merry
ea37f51942 Fix several reference counting and object lifetime issues between
the pass(4) and enc(4) drivers and devfs.

The pass(4) driver uses the destroy_dev_sched() routine to
schedule its device node for destruction in a separate thread
context.  It does this because the passcleanup() routine can get
called indirectly from the passclose() routine, and that would
cause a deadlock if the close routine tried to destroy its own
device node.

In any case, once a particular passthrough driver number, e.g.
pass3, is destroyed, CAM considers that unit number (3 in this
case) available for reuse.

The problem is that devfs may not be done cleaning up the previous
instance of pass3, and will panic if isn't done cleaning up the
previous instance.

The solution is to get a callback from devfs when the device node
is removed, and make sure we hold a reference to the peripheral
until that happens.

Testing exposed some other cases where we have reference counting
issues, and those were also fixed in the pass(4) driver.

cam_periph.c:	In camperiphfree(), reorder some of the operations.

		The peripheral destructor needs to be called before
		the peripheral is removed from the peripheral is
		removed from the list.  This is because once we
		remove the peripheral from the list, and drop the
		topology lock, the peripheral number may be reused.
		But if the destructor hasn't been called yet, there
		may still be resources hanging around (like devfs
		nodes) that haven't been fully cleaned up.

cam_xpt.c:	Add an argument to xpt_remove_periph() to indicate
		whether the topology lock is already held.

scsi_enc.c:	Acquire an extra reference to the peripheral during
		registration, and release it once we get a callback
		from devfs indicating that the device node is gone.

		Call destroy_dev_sched_cb() in enc_oninvalidate()
		instead of calling destroy_dev() in the cleanup
		routine.

scsi_pass.c:	Add reference counting to handle peripheral and
		devfs object lifetime issues.

		Add a reference to the peripheral and the devfs
		node in the peripheral registration.

		Don't attempt to add a physical path alias if the
		peripheral has been marked invalid.

		Release the devfs reference once the initial
		physical path alias taskqueue run has completed.

		Schedule devfs node destruction in the
		passoninvalidate(), and release our peripheral
		reference in a new routine, passdevgonecb() once
		the devfs node is gone.  This allows the peripheral
		to fully go away, and the peripheral destructor,
		passcleanup(), will get called.

MFC after:	3 days
Sponsored by:	Spectra Logic
2012-06-20 17:08:00 +00:00
Alexander Motin
0191d9b367 One more major cam_periph_error() rewrite to improve error handling and
reporting. It includes:
 - removing of error messages controlled by bootverbose, replacing them
with more universal and informative debugging on CAM_DEBUG_INFO level,
that is now built into the kernel by default;
 - more close following to the arguments submitted by caller, such as
SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which
errors are usual/expected at this point and which are really informative;
 - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller
specify how much assistance it needs at this point; previously consumers
controlled that by not calling cam_periph_error() at all, but that made
behavior inconsistent and debugging complicated;
 - tuning debug messages and taken actions order to make debugging output
more readable and cause-effect relationships visible;
 - making camperiphdone() (common device recovery completion handler) to
also use cam_periph_error() in most cases, instead of own dumb code;
 - removing manual sense fetching code from cam_periph_error(); I was told
by number of people that it is SIM obligation to fetch sense data, so this
code is useless and only significantly complicates recovery logic;
 - making ada, da and pass driver to use cam_periph_error() with new limited
recovery options to handle error recovery and debugging in common way;
as one of results, CAM_REQUEUE_REQ and other retrying statuses are now
working fine with pass driver, that caused many problems before.
 - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY()
loops on device probe, while device simply loads media; I think that problem
may already be fixed in other way, and even if it is not, solution must be
different.

Sponsored by:	iXsystems, Inc.
MFC after:	2 weeks
2012-06-09 13:07:44 +00:00
Alexander Motin
22c7d606d5 Add CAM_DEBUG_INFO debug messages for periph created/invalidated/destroyed
and for asyncs sent.
2012-06-07 10:53:42 +00:00
Kenneth D. Merry
6e4e0e26f1 Fix a bug introduced in r230000. We were eliminating all LUNs on a target
in response to CAM_DEV_NOT_THERE, instead of just the LUN in question.

This will now just eliminate the specified LUN in response to
CAM_DEV_NOT_THERE.

Reported by:	Richard Todd <rmtodd@servalan.servalan.com>
MFC after:	3 days
2012-01-25 17:58:47 +00:00
Kenneth D. Merry
8900f4b872 Fix a race condition in CAM peripheral free handling, locking
in the CAM XPT bus traversal code, and a number of other periph level
issues.

cam_periph.h,
cam_periph.c:	Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID
		flag prior to allowing a reference count to be gained
		on a peripheral.  Callers of this function will receive
		CAM_REQ_CMP_ERR status in the situation of attempting to
		reference an invalidated periph.  This guarantees that
		a peripheral scheduled for a deferred free will not
		be accessed during its wait for destruction.

		Panic during attempts to drop a reference count on
		a peripheral that already has a zero reference count.

		In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN
		set so that mallocs do not occur while the xpt topology
		lock is held, regardless of the allocation policy of the
		passed in sbuf.

		Add a new routine, cam_periph_release_locked_buses(),
		that can be called when the caller already holds
		the CAM topology lock.

		Add some extra debugging for duplicate peripheral
		allocations in cam_periph_alloc().

		Treat CAM_DEV_NOT_THERE much the same as a selection
		timeout (AC_LOST_DEVICE is emitted), but forgo retries.

cam_xpt.c:      Revamp the way the EDT traversal code does locking
		and reference counting.  This was broken, since it
		assumed that the EDT would not change during
		traversal, but that assumption is no longer valid.

		So, to prevent devices from going away while we
		traverse the EDT, make sure we properly lock
		everything and hold references on devices that
		we are using.

		The two peripheral driver traversal routines should
		be examined.  xptpdperiphtraverse() holds the
		topology lock for the entire time it runs.
		xptperiphtraverse() is now locked properly, but
		only holds the topology lock while it is traversing
		the list, and not while the traversal function is
		running.

		The bus locking code in xptbustraverse() should
		also be revisited at a later time, since it is
		complex and should probably be simplified.

scsi_da.c:	Pay attention to the return value from cam_periph_acquire().

		Return 0 always from daclose() even if the disk is now gone.

		Add some rudimentary error injection support.

scsi_sg.c:	Fix reference counting in the sg(4) driver.

		The sg driver was calling cam_periph_release() on close,
		but never called cam_periph_acquire() (which increments
		the reference count) on open.

		The periph code correctly complained that the sg(4)
		driver was trying to decrement the refcount when it
		was already 0.

Sponsored by:	Spectra Logic
MFC after:	2 weeks
2012-01-12 00:41:48 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Kenneth D. Merry
1cc052e80f Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
Alexander Motin
a07e846be0 In some cases failed SATA disks may report their presence, but don't
respond to any commands. I've found that because of multiple command
retries, each of which cause 30s timeout, bus reset and another retry or
requeue for many commands, it may take ages to eventually drop the
failed device. The odd thing is that those retries continue even after
XPT considered device as dead and invalidated it.

This patch makes cam_periph_error() to block any command retries after
periph was marked as invalid. With that patch all activity completes in
1-2 minutes, just after several timeouts, required to consider device
death. This should make ZFS, gmirror, graid, etc. operation more robust.

Reviewed by:	mjacob@ on scsi@

Approved by:	re (kib)
2011-07-29 20:30:28 +00:00
Justin T. Gibbs
3501942bbe Lay groundwork in CAM for recording and reporting physical path and
other device attributes stored in the CAM Existing Device Table (EDT).
This includes some infrastructure requried by the enclosure services
driver to export physical path information.

Make the CAM device advanced info interface accept store requests.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	- Replace scsi_get_sas_addr() with a scsi_get_devid() which takes
	  a callback that decides whether to accept a particular descriptor.
	  Provide callbacks for NAA IEEE Registered addresses and for SAS
	  addresses, replacing the old function.  This is needed because
	  the old function doesn't work for an enclosure address for a SAS
	  device, which is not flagged as a SAS address, but is NAA IEEE
	  Registered.  It may be worthwhile merging this interface with the
	  devid match interface.
	- Add a few more defines for some device ID fields.

  sbin/camcontrol/camcontrol.c:
	- Update for the CCB_DEV_ADVINFO interface change.

  cam/cam_xpt_internal.h:
	- Add the new fields for the physical path string to the CAM EDT.
  cam/cam_ccb.h:
	- Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb
	  structure to ccb_dev_advinfo.
	- Add a flag that changes this CCB's action to store, rather than
	  the default, retrieve.
	- Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT
	  physpath field.
	- Remove the never-implemented transport & proto flags.
  cam/cam_xpt.c:
  cam/cam_xpt.h:
	- Add xpt_getattr(), which provides a wrapper for fetching a device's
	  attribute using the GEOM strings as key.  This method currently
	  supports "GEOM::ident" and "GEOM::physpath".

Submitted by: will
Reviewed by : gibbs

Extend the XPT_DEV_MATCH api to allow a device search by device ID.
As far as the API is concerned, device ID is a binary blob to be
interpreted by the transport layer.  The SCSI implementation assumes
it is an array of VPD device ID descriptors.

  sys/cam/cam_ccb.h:
	Create a new structure, device_id_match_pattern, and
	update the XPT_DEV_MATCH datastructures and flags so
	that this pattern type can be used.

  sys/cam/cam_xpt.c:
	- A single pattern matching on both inquiry data and device
	  ID is invalid.  Report any violators.
	- Pass device ID match requests through to the new routine
	  scsi_devid_match().  The direct call of a SCSI routine is
	  a layering violation, but no worse than the one a few
	  lines up that checks inquiry data.  Defer cleaning this
	  up until our future, larger, rototilling of CAM.
	- Zero out cam_ed and cam_et nodes on allocation.  Prior to
	  this change, device_id_len and device_id were not inialized,
	  preventing proper detection of the presence of this
	  information.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	Add the scsi_match_devid() routine.

Add a helper function for extracting peripherial driver names

  sys/cam/cam_periph.c:
  sys/cam/cam_periph.h:
	Add the cam_periph_list() method which fills an sbuf
	with a comma delimited list of the peripheral instances
	associated with a given CAM path.

Add a helper functions for SCSI commands used by the SES driver.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	Add structure definitions and csio filling functions for
	the receive diagnostic results and send diagnostic commands.

Misc CAM XPT cleanups.

  sys/cam/cam_xpt.c:
	Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED
	events at the time async event handlers are attached
	even when registering just for events on a partitular
	SIM.  Previously, you had to register for these
	events on all SIMs in the system in order to get
	the initial broadcast even though subsequent device
	and path arrivals would be delivered.

  sys/cam/cam_xpt.c:
	Remove SIM mutex held asserts from path accessors.
	CAM paths are reference counted and it is this
	reference count, not the sim mutex, that garantees
	they are stable.

Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
Alexander Motin
20790a105d Remove always false "< 0" check for unsgined int variable. This check is
also duplicate, as the value was already checked for 0 before decrementing.

Reported by:	rpaulo
2011-04-18 14:34:10 +00:00
Matt Jacob
753e7ed072 Don't automatically send a START UNIT to sequential access devices-
this might cause them to load the tape unintentionally.

Reviewed by:	gibbs
MFC after:	1 month
2011-03-03 18:28:21 +00:00
John Baldwin
58ccf5b41c Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by:	bde
2011-01-11 13:59:06 +00:00
Kenneth D. Merry
7c103dde1e Fix a few issues related to the XPT_GDEV_ADVINFO CCB.
camcontrol.c:	In buildbusdevlist(), don't attempt to get call
		getdevid() for an unconfigured device, even when the
		verbose flag is set.  The cam_open_btl() call will almost
		certainly fail.

		Probe for the buffer size when issuing the XPT_GDEV_ADVINFO
		CCB.  Probing for the buffer size first helps us avoid
		allocating the maximum buffer size when it really may not
		be necessary.  This also helps avoid errors from
		cam_periph_mapmem() if we attempt to map more than MAXPHYS.

cam_periph.c:	In cam_periph_mapmem(), if the XPT_GDEV_ADVINFO CCB
		shows a bufsiz of 0, we don't have anything to map,
		so just return.

		Also, set the maximum mapping size to MAXPHYS
		instead of DFLTPHYS for XPT_GDEV_ADVINFO CCBs,
		since they don't actually go down to the hardware.

scsi_pass.c:	Don't bother mapping the buffer in XPT_GDEV_ADVINFO
		CCBs if bufsiz is 0.
2010-12-10 21:38:51 +00:00
Kenneth D. Merry
06e794928b Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00
Alexander Motin
0bb3f1d367 When requesting sense data for SIM not doing it automatically (such as
ATAPI or USB), request only as much data as requested by consumer.
On the way back -- report how much sense data we have actually received.
2010-11-08 15:59:41 +00:00
Matt Jacob
f1e2546a8c Protect periph drivers list and rearrange things to minimize the chance of
stepping oneself during probing.

Don't blindly decrement a periph probe count.

Reviewed by:	scsi@
Obtained from:	Alexander Motin, Atillio Rao, Others
MFC after:	1 month
2010-06-02 18:06:32 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
1f1158b28d MFp4:
Some more missed parts from previous commits.
2009-11-14 20:30:42 +00:00
Alexander Motin
d84c90a6cb MFp4:
Fix several device freeze counting bugs.
2009-11-14 20:13:38 +00:00
Alexander Motin
379ad35853 MFp4:
Implement device stats accounting for ATA commands.
2009-11-05 08:55:24 +00:00
Alexander Motin
8691755dff MFp4:
Improve reporting ATA Status error details.
2009-11-03 11:19:05 +00:00
Alexander Motin
0f3e215954 Make "Retrying Command" to be printed before actual retrying.
It should make debug/error log a bit more readable.
2009-10-23 13:39:30 +00:00
Alexander Motin
bbfa4aa1a6 Replace most of priority numbers with defines. No logical changes. 2009-10-23 08:27:55 +00:00
Alexander Motin
01a967e266 MFp4:
If on sense request device returns no sence, give up and return,
or we may loop forever.
2009-09-22 22:23:52 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Scott Long
571e8e20da Change cam_periph_ioctl() to take 'cmd' and a u_long instead of an
int.  All of its callers pass in cmd as a u_long, so this has
always been a dangerous type demotion.  It was spooted by clang/llvm
trying to do a type promotion and sign extension within
cam_periph_ioctl.

Submitted by:	rdivacky
2009-06-22 14:43:48 +00:00
Edward Tomasz Napierala
9b61a5b95e Add missing free(9) in error case.
Found with:	Coverity Prevent(tm)
CID:		4224
2009-05-12 15:14:37 +00:00
Max Khon
aa812d9e2a cam_periph_alloc: fix "invalid periph name" error condition
Found with:	Coverity Prevent(tm)
CID:		130
2009-02-09 17:02:54 +00:00
John Baldwin
1fa738c26f Now that mtx_sleep/msleep can accept Giant as the interlock, simplify the
CAM locking code slightly to no longer special case sleeping when a sim
uses Giant for its lock.

Tested by:	trasz
2009-01-26 15:01:47 +00:00
Edward Tomasz Napierala
53f8b22b34 Guard against NULL pointer dereference.
Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
Found with:	Coverity Prevent(tm)
CID:		130
2009-01-23 21:03:59 +00:00
Edward Tomasz Napierala
24ebf56636 Periph driver fixes, second try.
Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2008-12-19 14:31:40 +00:00
Edward Tomasz Napierala
a4e2e711a5 Move mtx_assert lower, when we can be sure that the pointer
to the mutex is valid.

Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2008-12-19 14:27:10 +00:00
Edward Tomasz Napierala
1fa9ee7d60 Revert r186186 for now; it breaks stuff.
Approved by:	rwatson (mentor)
2008-12-17 10:49:03 +00:00
Edward Tomasz Napierala
f5bc800067 Fix locking in periph drivers - don't try to unlock periph
that was already deallocated.

Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2008-12-16 17:01:52 +00:00
Rafal Jaworowski
af3c383a98 Fix typo.
Approved by:	cognet (mentor)
2008-02-12 11:07:33 +00:00
Scott Long
0dd50e9b5e Eliminate the use of M_TEMP. 2007-05-14 21:48:53 +00:00
Scott Long
77dc25cc98 Retire the spl() markers. Add in some minor missed locking as a result. 2007-04-19 23:34:51 +00:00