Fix an error where vfs.root.mountfrom was not always set as required
when creating a bootpool. After the recent geliboot changes, it was only
set if the main pool was encrypted.
Also resolve an error where the bootpool was unmounted twice causing
bsdinstall to stop with an error message about the failed command.
Approved by: re (gjb)
Sponsored by: BSDCan Hacker Lounge
xdr_rpcproc, xdr_rpcprog and xdr_rpcvers were broken in older
versions of FreeBSD but fixed in r296394. Give them some use
hoping they help make the code somewhat more readable.
Allow to setup country and/or regulatory domain before scanning
(since channel list is affected by regulatory restrictions this may
impact scan results).
PR: 182600 (originally)
Differential Revision: https://reviews.freebsd.org/D6325
Not returning if rtype == RPCBVERS_STAT will cause us to overrun the inf array, as
it's defined to be exactly RPCBVERS_STAT elements in rpcb_prot.x:
> include/rpc/rpcb_prot.x:typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
The proposed change also matches the rest of the rtype upper bound checks in the
file, so the original change was likely a typo.
MFC after: 2 weeks
Reported by: Coverity
CID: 1007567
Reviewed by: truckman
Sponsored by: EMC / Isilon Storage Division
This is influenced by the ath3k driver from linux (circa 2013, this is
how long I've been sitting on this.)
It handles loading in firmware using the newer model, where it assembles
the right set of firmware blobs and board configuration based on the
device list and querying the device.
The older utility could only load in a single image - which sometimes
was ath3k-1.fw and sometimes was ath3k-2.fw. However, the ath3k maintainers
didn't want to keep adding in binaries that were just derivatives with a
separate board config, so they deleted ath3k-2.fw from the Linux firmware
repository and instead, well, did this.
Now, this has been tested against AR3011 and AR3012 NICs from the AR9285+BT
combo up through to the QCA9565+BT combo. It doesn't yet work with the
QCAFN222 NIC as that is some newer chip.
The firmware can be grabbed from https://github.com/erikarn/ath3kfw/ in
the share/firmware/ath3k directory. I'll update this utility over time
to support the newer firmware drops (newer than mid-2013) which should
pull in the QCNFA222 and subsequent chips.
Tested:
* AR9285 + BT
* AR9287 + BT
* AR9485 + BT
* AR9462 + BT
* QCA9565 + BT
nis_ypldap_enable and nis_ypldap_flags.
Also add an entry on ypldap(8) that it is a feature ready and
appears on FreeBSD 11.0.
Requested by: rodrigc
Relnotes: Yes
After going through the signal work list, during which do_sigwork()
is called and essentially does nothing because -s and -R were
specified on the command line, newsyslog will sleep for 10 seconds
as the (verbose) code says: "Pause 10 seconds to allow daemon(s)
to close log file(s)".
However, the man page verbiage for -R (and -s) seems quite clear
that this sleep() is unnecessary because the daemon was expected
to have already closed the log file before calling newsyslog.
PR: 210020
Submitted by: David A. Bright <david_a_bright@dell.com>
MFC after: 1 week
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6727
The first file in these lists will generate everything else so only
it should be getting a .meta file. With bmake's missing=yes meta
feature these would otherwise cause a rebuild without the
.NOMETA hint.
Sponsored by: EMC / Isilon Storage Division
Install the blacklistd.conf man page, missed in the original commit.
Submitted by: Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6702
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
Files listed in 'CONFS' are not properly included in new
installations (missing from base.txz), for reasons I still
do not fully understand.
This reverts the change excluding /etc/ppp/ppp.conf from
a new installation. /etc/dma/dma.conf is also affected,
but requires a different solution, still being investigated.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
If tzsetup UTC is run then it successfully configured the system for UTC
including installing /etc/localtime however if the user ran just tzsetup
for interactive configuration and select UTC no /etc/localtime was installed
which resulted in failures for utilities which require said file.
Change set_zone_utc to call install_zoneinfo("UTC") to ensure that
/etc/localtime is created for interactive UTC selection.
Users who have previously run tzsetup in interactive mode and select UTC
can install the missing /etc/localtime by running tzsetup -r.
Also correct static miss-match for set_zone_utc.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
Comparing a character array against NULL serves no purpose. In any case
we are always asigning a value just before using the value so obviate
the comparison altogether.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D6651
CID: 1008422
In the event MK_INET6 != no in userspace, but is disabled in the
kernel, or if there aren't any IPv6 addresses configured in userspace
(for lo0 and all physical interfaces), rpcbind would terminate
immediately instead of silently failing on
Skip over the IPv6 block to its respective cleanup with freeifaddrs if
creating the socket failed instead of terminating rpcbind immediately
MFC after: 6 days
X-MFC with: r300932
Reported by: O. Hartmann <ohartman@zedat.fu-berlin.de>
Sponsored by: EMC / Isilon Storage Division
- getaddrinfo() sets res = NULL on failure and freeaddrinfo() always
dereferences its argument, so we should only free the address list after
a successful call.
- Address a second potential leak caused by getaddrinfo(AF_INET6)
overwriting the address list returned by getaddrinfo(AF_INET).
X-MFC-With: r300941
POSIX requires that the argument of dirname() is of type "char *". In
other words, the input buffer can be modified by the function to store
the directory name.
Pull a copy of the string before calling dirname(). We don't care about
freeing up the memory afterwards, as this is done at the very bottom of
main(), right before the program terminates.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D6628
- malloc failing will result in a delayed segfault
- socket failing will result in delayed failures with setsockopt
Exit in the event that either of these high-level conditions are met.
Reported by: Coverity
CID: 976288, 976321, 976858
Sponsored by: EMC / Isilon Storage Division
When bhyve cannot open a backing file, it now says explicitly which file
could not be opened
Note that the change has only be maed in block_if.c and not in
pci_virtio_block.c as the error will always be catched by the first
PR: 202321 (different patch)
Reviewed by: grehan
MFC after: 3 day
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D6576
Passing MAKEOBJDIRPREFIX to the main prog build (rescue) would confuse
WITH_AUTO_OBJ and cause it to create a recursed object directory that
then broke the actual prog build. This is normally not a problem since
we do not call 'make -f prog.mk obj' before building anything in it.
Crunchgen(1) also assumes that if -o is not passed then if an object
directory does not already exist then it should build in the source
directories. The normal buildworld process will have already ran 'make
obj' in each of the component directories so this is not a problem.
With WITH_AUTO_OBJ though this is not the case. So we must tell
crunchgen(1) that MK_AUTO_OBJ=yes will create the directory and to not
require it be present before generating its Makefile.
Sponsored by: EMC / Isilon Storage Division
The POSIX basename() function is allowed to modify its input buffer,
which means its argument is "char *". Pull a copy of the input string
before computing the base.
Reviewed by: jtl
Differential Revision: https://reviews.freebsd.org/D6465
At line 479 of ldapclient.c in client_build_req(), the error return
leaks ldap_attrs (CID 1340544). It looks like this can happen if
the first utoa() call in aldap_get_stringset() fails. It looks
like other leaks can happen if other utoa() calls fail since scanning
this array when it is freed stops when the first NULL is encountered.
Fix these problems by not storing NULL in the array when utoa()
fails, and by freeing ret and returning NULL if nothing is stored
in the array. That way the caller will never see the
ldap_attrs[0] == NULL case, so delete that check.
The ber_printf_element() calls ber_free_elements() on its ber
argument and returns NULL on failure. When each of its callers
detects failure, they do a goto fail, which then calls ber_free_elements()
with the same pointer (CID 1340543). Fix is to delete the
ber_free_elements() from ber_printf_element()
Reported by: Coverity
CID: 1340543, 1340544
Reviewed by: araujo
Differential Revision: https://reviews.freebsd.org/D6550
1199380 (Resource leak).
load_dsdt() calls strncpy() to copy a filename and Coverity warns
that the destination buffer may not be NUL terminated. Fix this
by using strlcpy() instead. If silent truncation occurs, then the
filename was not valid anyway.
load_dsdt() leaks an fd (CID 978405) and a memory region allocated
using mmap() (CID 1199380) when it returns. Fix these by calling
close() and munmap() as appropriate.
Don't bother fixing the minor memory leak "list", allocated by
AcGetAllTablesFromFile() (CID 1355191).
Check for truncation when creating the temp file name.
Set a flag to indicate that the temp file should be unlinked.
Relying on a strcmp() test could delete the input file in contrived
cases.
Reported by: Coverity
CID: 1011279, 978405, 1199380
Reviewed by: jkim
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6368
Coverity reports that a buffer used for temporary file generation
might not be NUL terminated by strncpy(). This is probably not
true because the input gets passed through realpath(), but if the
path name is sufficiently long the name could be truncated and cause
other problems. The code for generating the temp file names is
also overly complex. Instead of a bunch of calls to strncpy() and
and strncat(), simplify the code by using snprintf() and add checks
for unexpected truncation.
The output file created by iasl -d is predictable. Fix this by
using mkdtemp() to create a directory to hold the iasl input and
output files.
Check the return values of more syscalls.
Reported by: Coverity
CID: 1011278
Reviewed by: jkim
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6360
