We want to keep our root file system open to preserve bcache segment
between file accesses, thus reducing physical disk IO.
Reviewed by: imp, allanjude, kevans (previous version)
Differential Revision: https://reviews.freebsd.org/D30848
MFC after: 1 month
MIPS BERI boot loader is built with -mno-abicalls and -fno-pic
so prevent adding PIE-related build flags.
Fix build after 9a227a2fd6 ("Enable PIE by default on 64-bit architectures")
Obtained from: Semihalf
Sponsored by: Stormshield
When performing buildworld for MIPS with PIE enabled, the build fails
with "position-independent code requires '-mabicalls'" message.
-mno-abicalls and -fno-pic flags are explicitly set in MIPS ubldr
makefile, so to work around this problem, set MK_PIE=no for MIPS
ubldr.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28370
- beriloader: archsw is declared extern and defined elsewhere
- ofwloader: ofw_elf{,64} are defined in elf_freebsd.c and
ppc64_elf_freebsd.c respectively
- ubldr: syscall_ptr is defined in start.S for whichever ubldr platform is
building
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
BFD appears to silently truncate 0xffffffff80800000 when it processes the
ldscript for 32-bit mips, but LLD chokes on it as the linker script tries to
place elements above 32-bit range. It's unclear to me if silent truncation
is kosher or not and whether this patch is really what we want to do, but it
is one approach at least.
Reviewed by: imp, mizhka
Differential Revision: https://reviews.freebsd.org/D21487
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Differential Revision: https://reviews.freebsd.org/D19262
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.
For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.
All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
This matches a convention that we use, at least in ubldr, to prefix
getc/putc with a loader-specific prefix to avoid collisions. This was
encountered while trying to build the beri loader with MK_LOADER_LUA=yes.
No objection from: brooks
Reported by: emaste
We really only need one loader.conf. The other loader.conf was created
because the current one took forever to parse in FORTH. That will be
fixed in the next commit.
For directories that don't many anything, add NO_OBJ=t just before we
include bsd.init.mk. This prevents them from creating an OBJ
directory. In addition, prevent defs.mk from creating the machine
related links in these cases. They aren't needed and break, at least
on stable, the read-only src tree build.
OK. We don't really need a bsd.stand.mk, and it was causing a -fPIC
for the toolchain to be added (bogusly) when building on amd64. Pull
all relevant defs back into defs.mk and delete bsd.stand.mk.
This saves about 15-20k on i386 loader and zfsloader which when
combined with Lua give us a lot more stack space in those constrained
environments.
Summary:
All metadata.c files are very similar, with only trivial changes. Unify them
into a single common file, with minor special-casing where needed.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D13978
preference to LIBFICL{,32}. LIBFICL{,32} are now always defined, but
LDR_INTERP{,32} is defined empty when building w/o forth (aka the
simple interpreter) and defined to LIBFICL{,32} when we are building
forth.
MK_CTF, MK_SSP, MK_PROFILE, NO_PIC, and INTERNALLIB are always the
same, so set them in defs.mk. MAN= is common, so set it here too.
This removes a lot of boring repetition from the Makefiles that added
almost no value.
This matches directory structure used commonly in Linux-land, and it's
cleaner than mixing overlays into the existing module paths. Overlays are
still mixed in by specifying fdt_overlays in loader.conf(5).
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13922
In the freestanding boot compile environment, standard headers are not
available. Curiously, only building with clang exposed this as compiles
with external GCC still succeeded.
Sponsored by: DARPA / AFRL
The __dmadat variable is a statically allocated I/O buffer. The type is
declared in the ufsread.c source file and clang warns if a variable is
defined before it's type is declared.
Sponsored by: DARPA / AFRL
The beri boot loaders depend on symbols defined in linker scripts or
assembly files. The boot loaders do not care about the type of these
symbols but just want to extract a pointer to them. Older versions of
GCC permitted external symbols to be declared of type 'void' and then
'&foo' generated a void pointer to the memory at the symbol's address.
However, void objects are not valid C and newer versions of GCC error if
these are used. Instead, declare these symbols as being bytes (or
an array of bytes in the cheri_sdcard_vaddr case).
Sponsored by: DARPA / AFRL
Prior to r325114, bsd.init.mk was included after assignments to CFLAGS and
LDFLAGS in these Makefiles. After r325114, bare assignments (= rather than
+=) lost system-assigned default values that are needed when compiling with
an external toolchain. CFLAGS in both Makefiles already uses +=. This
commit changes LDFLAGS to use +=. While here, depend on the LDFLAGS update
in the parent Makefile.inc to set -nostdlib.
Sponsored by: DARPA / AFRL
removing this argument, and expanding when rc is NULL. This
effectively completes the back out of custom scripts for tftp booted
loaders from r269153 that was started in r292344 with the new path
tricks that obsoleted it.
Submitted by: Netflix
HELP_FILES is a loader only thing, so move it to loader.mk. Only
generate the help file if HELP_FILES is defined. Adjust Makefiles to
new convention. Fix a few cases where ${.CURDIR}/ was missing
resulting in missing bits from the help files.
Sponsored by: Netflix
weren't needed, and their existance interfered with things in subtle
ways. One of these subtle ways was that malloc could be different
based on what files were included when (even within the same .c file,
it turns out). Move to a single malloc implementation as well by
adding the calls to setheap() to gptboot.c and zfsboot.c. Once upon a
time, these boot loaders strove to not use libstand. However, with the
proliferation of features, that striving is too hard for too little
gain and lead to stupid mistakes.
This fixes the GELI-enabled (but not even using) boot environment. The
geli routines were calling libstand malloc but zfsboot.c and gptboot.c
were using the mini libstand malloc, so this failed when we tried to
probe for GELI partitions. Subtle changes in build order when moving
to self-contained stand build in r326593 toggled what it used from one
type to another due to odd nesting of the zfs implementation code that
differed subtly between zfsloader and zfsboot.
Sponsored by: Netflix
Don't print when we can't find a file. Copy it instead to the error
buffer. Higher level routines determine if it's appropriate to print
the error message.
Also, remove dead code (labeled bogusly lost functionality) since we
never used that functionality. Remove unused arg from interact() too.
Sponsored by: Netflix
Move kernel includes and libsa includes together at the top of defs.mk
Move all machine specific defines from Makefile.inc to their friends
in defs.mk.
Add comments and remove now useless junk after the move.
Sponsored by: Netflix
simd / no float stuff is centeralized here. Also centralise
-ffreestanding since it is specified everywhere.
This, along with a change to share/mk/bsd.cpu.mk to include -mno-avx2
in CFLAGS_NO_SIMD should fix building for newer machines (eg with
CPUTYPE=haswell) where clang was generating avx2 instructions.
Sponsored by: Netflix
