This is possible because, well, they're static. Both the dynamic environment
and the MD-environment (generally loader(8) environment) can potentially
have room for new variables to be set, and thus do not receive this
treatment.
r336020 introduced pcpu_page_alloc(), replacing page_alloc() as the
backend allocator for PCPU UMA zones. Unlike page_alloc(), it does
not honour malloc(9) flags such as M_ZERO or M_NODUMP, so fix that.
r336020 also changed counter(9) to initialize each counter using a
CPU_FOREACH() loop instead of an SMP rendezvous. Before SI_SUB_CPU,
smp_rendezvous() will only execute the callback on the current CPU
(i.e., CPU 0), so only one counter gets zeroed. The rest are zeroed
by virtue of the fact that UMA gratuitously zeroes slabs when importing
them into a zone.
Prior to SI_SUB_CPU, all_cpus is clear, so with r336020 we weren't
zeroing vm_cnt counters during boot: the CPU_FOREACH() loop had no
effect, and pcpu_page_alloc() didn't honour M_ZERO. Fix this by
iterating over the full range of CPU IDs when zeroing counters,
ignoring whether the corresponding bits in all_cpus are set.
Reported and tested by: pho (previous version)
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D16190
RB_ASKNAME is no longer instructions to the boot loader to request a
prompt for which kernel to boot. Instead, it asks for what the root
file system to use. RB_INITNAME is unused, and never has been in
FreeBSD as far as I can tell. Remove it from the documentation and fix
comment. RB_SELFTEST and RB_MINIROOT likewise (though they were
completely undocumented). These last three constants can likely just
be deleted as nothing references them (even to set useless bits).
RB_ASKNAME doesn't actually survive reboot, however, so needs to be
communicated to the bootloader via other means. If the bootloader sets
it, though, it will be honored.
* FreeBSD stores addresses in 8 bit format, but the OPAL API requires the 7-bit
address, and encodes the direction elsewhere. Behave like other i2c drivers,
and shift accordingly.
* The OPAL API can already handle multiple requests in flight. Change the async
token to be private to the thread, so as not to stomp across i2c accesses,
remove the limitation error message, and use the correct message index to
transfer all messages in the list.
* Micro-optimize the async handler to not continuously call pmap_kextract() when
spin-waiting for the operation to complete.
This has been tested by hexdumping an EEPROM attached via the icee(4) driver.
The pnfsdskill(8) command will normally fail if there is no valid mirror
for the DS to be disabled. However, a system administrator may need to
disable a DS which does not have a valid mirror so that the nfsd threads
can be terminated. This patch adds the kernel code needed by pnfsdskill(8)
to implement this "forced" case of disabling a DS.
This patch only affects the pNFS server.
"record-state" is similar to "keep-state", but it doesn't produce implicit
O_PROBE_STATE opcode in a rule. "set-limit" is like "limit", but it has the
same feature as "record-state", it is single opcode without implicit
O_PROBE_STATE opcode. "defer-action" is targeted to be used with dynamic
states. When rule with this opcode is matched, the rule's action will
not be executed, instead dynamic state will be created. And when this
state will be matched by "check-state", then rule action will be executed.
This allows create a more complicated rulesets.
Submitted by: lev
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D1776
Add generic function if_tunnel_check_nesting() that does check for
allowed nesting level for tunneling interfaces and also does loop
detection. Use it in gif(4), gre(4) and me(4) interfaces.
Differential Revision: https://reviews.freebsd.org/D16162
Add few quirks which are necessary to use AHCI on ThX2
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Differential revision: https://reviews.freebsd.org/D15929
In part, to support OpenSSL's use of cryptodev, which puts the HMAC pieces
in software and only offloads the raw hash primitive.
The following cryptodev identifiers are added:
* CRYPTO_RIPEMD160 (not hooked up)
* CRYPTO_SHA2_224
* CRYPTO_SHA2_256
* CRYPTO_SHA2_384
* CRYPTO_SHA2_512
The plain SHA1 and 2 hashes are plumbed through cryptodev (feels like there
is a lot of redundancy here...) and cryptosoft.
This adds new auth_hash implementations for the plain hashes, as well as
SHA1 (which had a cryptodev.h identifier, but no implementation).
Add plain SHA 1 and 2 hash tests to the cryptocheck tool.
Motivation stems from John Baldwin's earlier OCF email,
https://lists.freebsd.org/pipermail/freebsd-arch/2018-January/018835.html .
In the armv4/5 world device statements in these files were common, but in
the v6/7 world, other socs don't put device statements into those files, so
this just brings imx5 and imx6 into line with the current conventions.
Move the module declaration so that it's after the device table.
The PNP_INFO must come after the module declaration.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D15995
Move device table earlier in the file so we can reference it in the
PNP_INFO macro.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
Make unsigned values uint16_t for pnp table. They are properly
uint16_t befause they are 16-bit PCI IDs. The PNP_INFO language has no
type for bare unsigned.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
Move module delcaration to be after device table. The PNP_INFO must
follow the module declaration.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
This addresses a problem described in r335784, where memory
pressure forces reclamation of a PV chunk and in rare cases leads to a
use-after-free of a page table page.
Reviewed by: alc, kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16181
ignore the timestamp passed in to settime() due to inaccuracy, the core
routines now pass in a nanosecond-accurate time freshly-obtained before
calling each driver's settime() method. Also, add calls to the new
debugging output helpers.
If a mirrored DS is being recovered that has a lot of large sparse files,
pnfsdscopymr(8) would use a lot of space on the recovered mirror since it
would write the "holes" in the file being mirrored.
This patch adds code to check for a "hole" and skip doing the write.
The check is done on a "per PNFSDS_COPYSIZ size block", which is currently 64K.
I think that most file server file systems will be using a blocksize at
least this large. If the file server is using a smaller blocksize and
smaller holes need to be preserved, PNFSDS_COPYSIZ could be decreased.
The block of 0s is malloc()d, since pnfsdcopymr(8) should be an infrequent
occurrence.
Doing so ensures that all threads sharing the pmap have a consistent
view of the mapping. This fixes the problem described in the commit
log messages for r329254 without the overhead of an extra fault in the
common case. Once other pmap_enter() implementations are similarly
modified, the workaround added in r329254 can be removed, reducing the
overhead of CoW faults.
See also r335784 for amd64. The i386 implementation of pmap_enter()
already reused the PV entry from the old mapping.
Reviewed by: kib, markj
Tested by: pho
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16133
After the addition of the "#mds_path" suffix for a DS specification on the
"-p" nfsd option, it is possible to have a mix of DSs assigned to an MDS
file system and DSs that store files for all DSs. This is what I referred
to as "hybrid" above.
At first, I didn't think this hybrid case would be useful, but I now believe
that some system administrators may fine it useful.
This patch modifies the file storage assignment algorithm so that it
makes the "#mds_path" DSs take priority and the all file systems DSs
are now only used for MDS file systems with no "#mds_path" DS servers.
This only affects the pNFS server for this "hybrid" case.
Avoid Undefined Behavior in ffs_clusteracct()
Change the type of 'bit' variable from int to unsigned int and use unsigned
values consistently.
sys/ufs/ffs/ffs_subr.c:336:10, shift exponent -1 is negative
Detected with Kernel Undefined Behavior Sanitizer.
Reported by <Harry Pantazis>
Submitted by: Pedro Giffuni
automatically initializing the watchdog using the given value. Also,
attach at BUS_PASS_TIMER to extend watchdog protection to more of the
kernel init process.
The correct value is seconds*2-1. The code was using just seconds*2, which
led to being off by a half-second -- usually not a big deal, except when the
value was the max (128) it overflowed so zero would get written to the
countdown register, which equates to a timeout of a half second.
ifioctl(). Move it inside the proper #ifdef. This was throwing a valid
"Assigned but unused" warning with gcc.
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16063
cache.
Without this patch, TCP FO could be used when using alternate
TCP stack, but only existing entires in the TCP client cookie
cache could be used. This cache was not populated by connections
using alternate TCP stacks.
Sponsored by: Netflix, Inc.
whether the TCP FO support is enabled or not for the client side.
The code in tcp_fastopen_init() implicitly assumed that the sysctl
variable V_tcp_fastopen_client_enable was initialized to 0. This
was initially true, but was changed in r335610, which unmasked this
bug.
Thanks to Pieter de Goeje for reporting the issue on freebsd-net@
ofw_iicbus already has attachments on iichb. Rather than adding an explicit
attachment onto opal_i2c, simply change the exposed name of the OPAL i2c bus
to 'iichb'.
FreeBSD VM can't boot up on Hyper-V after the recent malloc change in
r335068: Make UMA and malloc(9) return non-executable memory in most cases.
The hypercall page here must be executable.
Fix the boot-up issue by adding M_EXEC.
PR: 229167
Sponsored by: Microsoft
Add PCI ids for I2C controllers on Apollo Lake platform. Also convert
switch/case probe logic into a table.
Reviewed by: avg
Differential Revision: https://reviews.freebsd.org/D16120
This restores counters(9) operation.
Revert r336024. Improve assert of pcpu size on x86.
Reviewed by: mmacy
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16163
Due to the way rtld creates mappings for the shared objects, each dso
causes unmap of at least three guard map entries. For instance, in
the buildworld load, this change reduces the amount of pmap_remove()
calls by 1/5.
Profiled by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16148
Linux/arm64 is CLONE_BACKWARDS - i.e., "Architecture has tls passed as
the 4th argument of clone(2), not the 5th one."
The linux clone() syscall has four different permutations of argument
order, depending on architecture - see the #ifdef CONFIG_CLONE_BACKWARDS
maze in Linux's kernel/fork.c.
Sponsored by: Turing Robotic Industries
an NFSERR_STALE error reported via a LayoutReturn.
The current FreeBSD client can generate these errors for an operational
DS while doing a recovery of a mirror after a mirrored DS has been repaired.
I am not sure why these errors occur, but my best current guess is a race
between the Layout Recall issued by the kernel code run from pnfsdscopymr(8)
and a Read operation on the DS for the file bing copied.
The errors are not fatal, since the client falls back on doing I/O through
the MDS, which can do the I/O successfully as a proxy. (The fact that the
MDS can do this indicates that the file does still exist on the functioning
DS.)
This change only affects the pNFS server and only when a client does a
LayoutReturn with the NFSERR_STALE error report.
The dynamic environment was being initialized at SI_SUB_KMEM, SI_ORDER_ANY.
I added the hint-merging at SI_SUB_KMEM, SI_ORDER_ANY as well in r335998 -
this can only work by coincidence.
Re-do both to operate at SI_SUB_KMEM + 1, SI_ORDER_FIRST and SI_ORDER_SECOND
respectively to be safe. It's sufficiently obfuscated away as to when in
SU_SUB_KMEM malloc will be available, and the dynamic environment cannot be
relied upon there anyways since it's initialized at SI_ORDER_ANY.
Reported by: bde
Discussed with: bde
X-MFC-With: r335998
Due to the way rtld creates mappings for the shared objects, each dso
causes unmap of at least three guard map entries. For instance, in
the buildworld load, this change reduces the amount of pmap_remove()
calls by 1/5.
Profiled by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16148
SMP systems by extending defined(SMP) to include defined(KLD_MODULE).
This is a regression issue after r335873 .
Discussed with: mmacy@
Sponsored by: Mellanox Technologies
Apply temporary fix to counter until daylight hours.
The fact that the assembly for counter_u64_add relied on the sizeof(struct pcpu) was
the basis for the otherwise arbitrary offset never came up in D15933.
critical_{enter,exit} is now inline so the only real added overhead is the
added (mostly false) conditional branch in exit.
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
quatactl(2) mechanism. (Read-only at this point, however.)
In particular, this is to allow rpc.rquotad query quotas
for NFS mounts, allowing users to see their quotas on the
hosts using the datasets.
The changes specifically:
* Add new RPC entry points for querying quotas.
* Changes the library routines to allow non-UFS quotas.
* Changes rquotad to check for quotas on mounted filesystems,
rather than being limited to entries in /etc/fstab
* Lastly, adds a VFS entry-point for ZFS to query quotas.
Note that this makes one unavoidable behavioural change: if quotas
are enabled, then they can be queried, as opposed to the current
method of checking for quotas being specified in fstab. (With
ZFS, if there are user or group quotas, they're used, always.)
Reviewed by: delphij, mav
Approved by: mav
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D15886
It is possible that a fictitious unmanaged userspace mapping of
superpage is created on x86, e.g. by pmap_object_init_pt(), with the
physical address outside the vm_page_array[] coverage.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
gcc found that the variabl "code", while being assigned a value, isn't
be used for anything.
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D16114
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
It looks like the intent was to allow ZSTD support to be
compiled into the kernel with options ZSTDIO. But it doesn't look
like that was ever implemented or I'm missing how to do it.
I did a cursory audit of kernel config files and made a decision to
enable ZSTDIO in riscv GENERIC and mips MALTA configurations. All other
kernel configurations already had this option in their kernel configs
but they didn't do anything useful as the feature was declared as
"standard" prior to this.
Reviewed by: cem allanjude
Differential Revision: https://reviews.freebsd.org/D16007
further changes adding another level of indentation.
Some of the logic got simplified with the break out functions.
There should be no functional changes.
Reviewed by: kib
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15914
On the 4/4 i386, copyout(9) may need to call pmap_extract_and_hold()
on arbitrary userspace mapping. If the mapping is backed by the
non-managed cdev pager or by the sg pager, on dense configs we might
access arbitrary element of vm_page_array[], in particular, not
corresponding to a page from the memory segment. Initialize such pages
as fictitious with the corresponding physical address.
Reported by: bde
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16085
physical address, which is readily available after sucessfull
vm_page_pa_tryrelock().
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
At the moment, hintmode and envmode are used to indicate whether static
hints or static env have been provided in the kernel config(5) and the
static versions are mutually exclusive with loader(8)-provided environment.
hintmode *can* be reconfigured later to pull from the dynamic environment,
thus taking advantage of the loader(8) or post-kmem environment setting.
This changeset fixes both problems at once to move us from a semi-confusing
state to a consistent state: if an environment file, hints file, or
loader(8) environment are provided, we use them in a well-known order of
precedence:
- loader(8) environment
- static environment
- static hints file
Once the dynamic environment is setup this becomes a moot point. The
loader(8) and static environments are merged (respecting the above order of
precedence), and the static hints are merged in on an as-needed basis after
the dynamic environment has been setup.
Hints lookup are changed to respect all of the above. Before the dynamic
environment is setup, lookups use the above-mentioned order and fallback to
the next environment if a matching hint is not found. Once the dynamic
environment is setup, that is used on its own since it captures all of the
above information plus any dynamic kenv settings that came up later in boot.
The following tangentially related changes were made to res_find:
- A hintp cookie is now passed in so that related searches continue using
the chain of environments (or dynamic environment) without relying on
global state
- All three environments will be searched if they actually have valid hints
to use, rather than just choosing the first environment that actually had
a hint and rolling with that only
The hintmode sysctl has been ripped out. static_{env,hints}.disabled are
still honored and will disable their respective environments from being used
for hint lookups and from being merged into the dynamic environment, as
expected.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15953
physical address, which is readily available after sucessfull
vm_page_pa_tryrelock().
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
At the moment, hintmode and envmode are used to indicate whether static
hints or static env have been provided in the kernel config(5) and the
static versions are mutually exclusive with loader(8)-provided environment.
hintmode *can* be reconfigured later to pull from the dynamic environment,
thus taking advantage of the loader(8) or post-kmem environment setting.
This changeset fixes both problems at once to move us from a semi-confusing
state to a consistent state: if an environment file, hints file, or
loader(8) environment are provided, we use them in a well-known order of
precedence:
- loader(8) environment
- static environment
- static hints file
Once the dynamic environment is setup this becomes a moot point. The
loader(8) and static environments are merged (respecting the above order of
precedence), and the static hints are merged in on an as-needed basis after
the dynamic environment has been setup.
Hints lookup are changed to respect all of the above. Before the dynamic
environment is setup, lookups use the above-mentioned order and fallback to
the next environment if a matching hint is not found. Once the dynamic
environment is setup, that is used on its own since it captures all of the
above information plus any dynamic kenv settings that came up later in boot.
The following tangentially related changes were made to res_find:
- A hintp cookie is now passed in so that related searches continue using
the chain of environments (or dynamic environment) without relying on
global state
- All three environments will be searched if they actually have valid hints
to use, rather than just choosing the first environment that actually had
a hint and rolling with that only
The hintmode sysctl has been ripped out. static_{env,hints}.disabled are
still honored and will disable their respective environments from being used
for hint lookups and from being merged into the dynamic environment, as
expected.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15953
proc0 and init are setup as a circular dependency.
create_init() calls fork1() which calls do_fork(). There the
newproc (initproc) is setup with a reaper of proc0 who's reaper
points to itself. The newproc (initproc) is then put on its
reaper's (proc0) p_reaplist (initproc is a descendants of proc0
for proc0 to reap). Upon return to create_init(), proc0 is
added to initproc's p_reaplist (which would mean proc0 is a
descendant of init, for init to reap). This creates a
circular dependency which eventually leads to LIST corruptions
when trying to kill init and a proc0.
For the base system we never really hit this case during reboot.
The problem only became visible after adding more virtual process
spaces which could go away cleanly (work existing in an experimental
branch).
Reviewed by: kib
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15924
doing it last. Also, remove the local tracking of whether usb's busdma
memory allocation got done, because it's safe to call the free_all
function even if it wasn't.
detach() to do nothing if attach() succeeded, which is the opposite of
what's needed. Also, move device_delete_children() from the end to the
beginning of detach(), so that children won't be trying to make use of the
hardware we're in the process of shutting down.
PR: 229510
No valid FreeBSD binary ever called them (they would call lchown and
msync directly) and we haven't supported NetBSD binaries in ages.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15814
arrays, as elements 0 and 1 of one array and elements 1 and 2 of the other.
Run the loop 0..1 instead of 1..2 and use named constants to offset into
one of the arrays.
PR: 229508
Replace size_t members with ksize_t (uint64_t) and pointer members
(never used as pointers in userspace, but instead as unique
idenitifiers) with kvaddr_t (uint64_t). This makes the structs
identical between 32-bit and 64-bit ABIs.
On 64-bit bit systems, the ABI is maintained. On 32-bit systems,
this is an ABI breaking change. The ABI of most of these structs
was previously broken in r315662. This also imposes a small API
change on userspace consumers who must handle kernel pointers
becoming virtual addresses.
PR: 228301 (exp-run by antoine)
Reviewed by: jtl, kib, rwatson (various versions)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15386
mapping, then it leaks the unlinked PV entry. This change eliminates that
leak, freeing the PV entry.
Reviewed by: kib, markj
X-MFC with: r335784
Differential Revision: https://reviews.freebsd.org/D16130
returning NULL.
vm_fault_quick_hold_pages() can be legitimately called on userspace
mappings backed by fictitious pages created by unmanaged device and sg
pagers.
Note that other architectures pmap_extract_and_hold() might need
similar fix, but I postponed the examination.
Reported by: bde
Discussed with: alc
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16085
The recently added feature of the pNFS server will set an fsid for the
MDS file system to define the file system a DS should store files for.
For a case where a DS handling all file systems has failed, it was possible
for the code to check for a mirror with a specified fs, even though
nfsdev_mdsisset was 0, possibly causing a false successful check for a mirror.
This patch adds a check for nfsdev_mdsisset != 0 to avoid this.
It only affects the pNFS server for a rare case. Found via code inspection.
IPSEC_PCBCTL() functions, which include tcp_ipsec_pcbctl(),
ipsec4_pcbctl(), and ipsec6_pcbctl(), should all have matching locking
semantics.
ipsec4_pcbctl() and ipsec6_pcbctl() expect the inp to be unlocked on
entry and exit and appear to be correctly implemented as such. But
tcp_ipsec_pcbctl() had other semantics. This patch fixes the semantics
for tcp_ipsec_pcbctl().
Submitted by: Jason Eggleston <jason@eggnet.com>
MFH: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14623
r333175 (multicast changes) exposed a bug where
mxge was not checking to see if the driver was being
unloaded while handing ioctls that touch hardware.
As a result, now that in6m_disconnect() is run from
an async gtaskq, it was busy-waiting in mxge_send_cmd()
while the mcast list was destroyed.
Also replace numbered list with - bulleted so the list entries do not
need to be renumbered as tasks are completed.
Sponsored by: The FreeBSD Foundation
the process arguments. New arguments length zero causes the drop of
the pargs instead of allocation of useless zero-length buffer.
Submitted by: Thomas Munro
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16111
It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
Several third-parties use at least some of these ioctls. While it would be
better for regression testing if they were used in base (or at least in the
test suite), it's currently not worth the trouble to push through removal.
Submitted by: antoine, markj
On FDT-enabled platforms check if DTB blob has MAC address configured by
a boot loader. This information passed as a "local-mac-address" or
"mac-address" property of the device node. For USB NICs node
can be found by looking for compatibility string "usbVVV,PPP" where
VVV - vendor id (hex) and PPP - product id (hex)
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D16117
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
The ADD, AND, OR, and SUB instructions take at most a 32-bit
sign-extended immediate operand. 64-bit constants that do not fit into
that constraint need to be loaded into a register. The 'i' constraint
tells the compiler it can pass any integer constant to the assembler,
whereas the 'e' constrain only permits constants that fit into a 32-bit
sign-extended value. This fixes using
atomic_add/clear/set/subtract_long/64 with constants that do not fit into
a 32-bit sign-extended immediate.
Reported by: several folks
Tested by: Pete Wright <pete@nomadlogic.org>
MFC after: 2 weeks
Some example files:
ia32_genassym.o
acpi_wakecode.o
The old mkdep method also lacked tracking these files.
Objects defined in sys/conf/files with no-obj and no-implicit-rule get their
own targets defined in the kernel Makefile but lack having their objects added
to DEPENDOBJS so never get a .depend file generated. Normally if an object is
in OBJS it will get a .depend file.
Fix this by looking for .o files in CLEAN and ensuring they are part of
the -MD filtering and .depend loading. This is a hack. Other solutions
could exist involving sys/conf/files or config(8) to auto add these to
DEPENDFILES/DEPENDOBJS but this method seems reliable enough without being
intrusive or error-prone for new files.
Reported by: bde
MFC after: 3 weeks
Sponsored by: Dell EMC
