Rename ACPI_IVRS_HARDWARE_NEW to ACPI_IVRS_HARDWARE_EFRSUP, since new definitions add Extended Feature Register support. Use IvrsType to distinguish three types of IVHD - 0x10(legacy), 0x11 and 0x40(with EFR). IVHD 0x40 is also called mixed type since it supports HID device entries.
Fix 2 coverity bugs reported by cem.
Reported by:jkim, cem
Approved by:grehan
Differential Revision://reviews.freebsd.org/D14501
IVRS can have entry of type legacy and non-legacy present at same time for same AMD-Vi device. ivhd driver will ignore legacy if new IVHD type is present as specified in AMD-Vi specification. Earlier both of IVHD entries used and two ivhd devices were created.
Add support for new IVHD type 0x11 and 0x40 in ACPI. Create new struct of type acpi_ivrs_hardware_new for these new type of IVHDs. Legacy type 0x10 will continue to use acpi_ivrs_hardware.
Reviewed by: avg
Approved by: grehan
Differential Revision:https://reviews.freebsd.org/D13160
plain-vanilla ETH microcode. The QOS_VLAN firmware added support in microcode
for handling IEEE 802.1q tags, but the npe(4) driver did not actually
support the relevant signalling. As a result, it was impossible to use
VLANs with npe(4). Switching to the more basic microcode (same license)
removes the on-NIC promisisng and makes vlan(4) work on both NPE interfaces.
Ref: https://lists.freebsd.org/pipermail/freebsd-arm/2012-August/003826.html
It turns out that this is useful on hornet and wasp SoCs but it isn't
enabled in ye olde HAL /unless/ you were using a version from one of the
business units building USB targetted devices. It eventually got fixed
for all of them as people started wanting to use the USB ports on their
SoCs (eg for flash storage, bluetooth, 4G/LTE widgets, etc.)
This is actually a fix from ath9k but I'm merging it with the available-but-
disabled code in the QCA reference HAL.
Tested:
* AR9331 SoC
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
* flesh out a "get default DFS parameters" routine
* remove the stub that returns NULL
* fix up the enable DFS method to do what FreeBSD does - specifically, allow pe_enabled
to be set/cleared.
This allows the radar pulse reporting code to function, but it doesn't yet
do anything useful.
* add debugging
* disable the manual noise floor calibration and tracking done by the HAL;
this interferes with the normal calibration path and will lock up the RX
side
* don't program short report / priority if they're provided as NOVAL.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
f/w for the other devices supported by this driver.
Patch linked in https://reviews.freebsd.org/D6967 but not actually
a part of the review.
Obtained from DragonflyBSD.
Submitted by: Kevin Bowling <kev009@kev009.com>
MFC after: 2 weeks
Relnotes: yes
