Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Rewrite EFI part device interface to present disk devices in more
user friendly way.
We keep list of three types of devices: floppy, cd and disk, the
visible names: fdX: cdX: and diskX:
Use common/disk.c and common/part.c interfaces to manage the
partitioning.
The lsdev -l will additionally list the device path.
Reviewed by: imp, allanjude
Approved by: imp (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8581
Nowadays it's not necessary to compute network mask from the IP address and
compare to given by DHCP.
Submitted by: kczekirda
Reviewed by: glebius, bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D8740
party software, this provides more standarized import workflow and
makes future upgrades easier.
The following files are new with this commit:
zconf.h.in
zlib.map
zlib.pc.in
They are not connected to build, but were kept in tree for reference
for future maintenance.
All our local trivial changes were applied to contrib/zlib, and the
contrib/zlib vendor source code is intended to 100% match lib/libz
before this commit.
MFC after: 2 weeks
The strategy argument cleanup in r310850 did miss another call to strategy(),
and left it with extra argument.
Reviewed by: allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9003
Apparently the libstand dosfs optimization is a bit too optimistic
and did introduce possible memory corruption.
This patch is backing out the bad part and since this results in
dosfs reading full blocks now, we can also remove extra offset argument
from dv_strategy callback.
The analysis of the issue and the backout patch is provided by Mikhail Kupchik.
PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8644
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().
This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.
For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D5461
with all dhcp parameters we might be interested in.
Some DHCP server like the new kea (by ISC) expect it.
This makes pxeboot functional with ISC kea.
Submitted by: Vincent Legout <vincent.legout@gandi.net>
MFC after: 1 month
Sponsored by: Gandi.net
rS306534 did create bad cstyle by my mistake, correcting it.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8103
Add a new 'netproto' variable which can be set for now to
NET_TFTP or NET_NFS (default to NET_NONE)
From the dhcp options if one sets the root-path option to:
"ip:path", the loader will consider it is booting over NFS
(meaning same behaviour as the default current behaviour)
if the dhcp option "tftp server address" is set (option 150)
the loader will consider it is booting over tftpfs, it will then
consider the root-path options with 2 possible case
1. "path" then the IP of the tftp server will be the one passed by
the option 150, and the files will be retrieved under "path" on the tftp
server
2. "ip:path" then the IP of the tftp server will be the one passed in
the option "overwritting the IP from the option 150.
We could not "abuse" the rootpath option in the form or tftp://ip:path because
this is already used for other purpose by iPXE preventing any chainload from
iPXE to the FreeBSD loader.
Given at each open(), the loader loops over all available filesystems and keep
the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa.
the tftpfs and nfs implementation in libstand now return EINVAL early if
'netproto' for that purpose.
Reviewed by: tsoome
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D7628
The tftp download for large files will cause internal block id
to wrap to 0 as the data type is unsigned short.
Also provide file size information for stat.
PR: 200500
Reported by: tsoome
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7660
The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.
Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713
the value in a new global intf_mtu for use by the application.
These changes were inspired by the patch provided by Robert Blayzor in
PR 187094, and will allow loader(8) to propagate the value to the kernel
along with the other nfs_diskless parms delivered via environment vars.
wrapped in an i386 ifdef with a comment questioning their usefulness even
there. It turns out they aren't referenced anywhere, but their presence
prevents using sys/endian.h in libstand code.
These days, sys/endian.h provides much better support for such things, using
compiler builtins and inline functions (and creating connections between
libstand code and header files from sys/ would not be breaking new ground).
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Although we don't use it in tree yet libstand is installed as user-
facing /usr/liblibstand.a, and some work in progress makes use of it.
Instead of conflicting with ongoing libstand Makefile deduplication,
just add it now.
libstand is built in three places (lib/libstand, sys/boot/libstand32,
and sys/boot/userboot/libstand). Reduce Makefile duplication by
.including libstand/Makefile from sys/boot/libstand32/Makefile.
sys/boot/userboot/libstand/Makefile will be addressed later, as it
contains additional differences yet to be handled.
This change also switches libstand32 to use the new uuid_from_string
and uuid_to_string, which was not included in r292473.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4747
relocation fixups unsupported by the self_reloc() code, and don't optimize
memcpy/memset using floating point registers, because in a standalone
environment nothing has initialized the fpu hardware.
variables in loader(8) and other libstand applications.
Sometimes a dhcp server provides incorrect information along with the IP
address. It would be useful to have a way to override this with
locally-supplied information, such as command line parameters passed from a
prior-stage bootloader. This change allows pre-existing env vars to take
precedence over values delivered by the dhcp or bootp server.
The bootp/dhcp code in libstand automatically creates environment variables
from the data provided by the server (dhcp.root-path, dhcp.domain-name,
etc). It also transcribes the values to some global variables such as
'rootpath' and 'hostname'.
This change does two things:
When adding dhcp.* vars to the environment, don't replace existing
vars/values.
When setting the global vars rootpath and hostname, use the
dhcp.root-path and dhcp.host-name env var values if they exist.
This allows the platform-specific part of loader(8) to obtain override
values in some platform-specific way and store them in the environment
before opening the network device. The set of values that can be overriden
is currently limited to just string options. The values that are delivered
as binary data are things that probably shouldn't be overridden (IP,
netmask, gateway, etc).
The original patch this evolved from was submitted by martymac@
PR: 202098
Differential Revision: https://reviews.freebsd.org/D4559
normal libc versions of these functions use asprintf and sscanf, both
of which aren't available in the libstand world. It's easier to
rewrite these than to try to claw those functions into libstand.
Also include uuid_create_nil, since it's safe to include. These were
written from scratch, except for bits of comments that I got from the
libc version, which are acknowledged in the source.
Differential Revision: https://reviews.freebsd.org/D4540
