copyout(9) while owning zone lock.
Despite old value sysctl buffer is wired, spurious faults might still
occur.
Note that we still own the uma_rwlock there, but this lock does not
participate in sensitive lock orders.
Reported and tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
size of UMA zone allocation is greater than page size. In this case zone
of zones can not use UMA_MD_SMALL_ALLOC, and we need to postpone switch
off of this zone from startup_alloc() until full launch of VM.
o Always supply number of VM zones to uma_startup_count(). On machines
with UMA_MD_SMALL_ALLOC ignore it completely, unless zsize goes over
a page. In the latter case account VM zones for number of allocations
from the zone of zones.
o Rewrite startup_alloc() so that it will immediately switch off from
itself any zone that is already capable of running real alloc.
In worst case scenario we may leak a single page here. See comment
in uma_startup_count().
o Hardcode call to uma_startup2() into vm_mem_init(). Otherwise some
extra SYSINITs, e.g. vm_page_init() may sneak in before.
o While here, remove uma_boot_pages_mtx. With recent changes to boot
pages calculation, we are guaranteed to use all of the boot_pages
in the early single threaded stage.
Reported & tested by: mav
o Most of startup zones have struct uma_slab embedded into the slab,
so provide macro UMA_SLAB_SPACE and use it instead of UMA_SLAB_SIZE,
when calculating how many pages would certain kind of allocations
require. Some zones are offpage, so we might have a positive inaccuracy.
o The keg for the zone of zones is allocated "dynamically", so we
need +1 when calculating amount of pages for kegs. [1]
o The zones of zones and zones of kegs have arbitrary alignment of 32,
and this also needs to be accounted for. [2]
While here, spread more comments and improve diagnostic messages.
Reported by: pho [1], jtl [2]
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
for UMA startup.
o Introduce another stage of UMA startup, which is entered after
vm_page_startup() finishes. After this stage we don't yet enable buckets,
but we can ask VM for pages. Rename stages to meaningful names while here.
New list of stages: BOOT_COLD, BOOT_STRAPPED, BOOT_PAGEALLOC, BOOT_BUCKETS,
BOOT_RUNNING.
Enabling page alloc earlier allows us to dramatically reduce number of
boot pages required. What is more important number of zones becomes
consistent across different machines, as no MD allocations are done before
the BOOT_PAGEALLOC stage. Now only UMA internal zones actually need to use
startup_alloc(), however that may change, so vm_page_startup() provides
its need for early zones as argument.
o Introduce uma_startup_count() function, to avoid code duplication. The
functions calculates sizes of zones zone and kegs zone, and calculates how
many pages UMA will need to bootstrap.
It counts not only of zone structures, but also of kegs, slabs and hashes.
o Hide uma_startup_foo() declarations from public file.
o Provide several DIAGNOSTIC printfs on boot_pages usage.
o Bugfix: when calculating zone of zones size use (mp_maxid + 1) instead of
mp_ncpus. Use resulting number not only in the size argument to zone_ctor()
but also as args.size.
Reviewed by: imp, gallatin (earlier version)
Differential Revision: https://reviews.freebsd.org/D14054
domains can be done by the _domain() API variants. UMA also supports a
first-touch policy via the NUMA zone flag.
The slab layer is now segregated by VM domains and is precise. It handles
iteration for round-robin directly. The per-cpu cache layer remains
a mix of domains according to where memory is allocated and freed. Well
behaved clients can achieve perfect locality with no performance penalty.
The direct domain allocation functions have to visit the slab layer and
so require per-zone locks which come at some expense.
Reviewed by: Attilio (a slightly older version)
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
rather than kmem arena size to determine available memory.
Initialize the UMA limit to LONG_MAX to avoid spurious wakeups on boot before
the real limit is set.
PR: 224330 (partial), 224080
Reviewed by: markj, avg
Sponsored by: Netflix / Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13494
atomic_set_*() sets a bit in the target memory location, so
atomic_set_int(&uma_reclaim_needed, 0) does not do what it looks like
it does.
PR: 224080
Reviewed by: jeff, kib
Differential Revision: https://reviews.freebsd.org/D13412
The arena argument to kmem_*() is now only used in an assert. A follow-up
commit will remove the argument altogether before we freeze the API for the
next release.
This replaces the hard limit on kmem size with a soft limit imposed by UMA. When
the soft limit is exceeded we periodically wakeup the UMA reclaim thread to
attempt to shrink KVA. On 32bit architectures this should behave much more
gracefully as we exhaust KVA. On 64bit the limits are likely never hit.
Reviewed by: markj, kib (some objections)
Discussed with: alc
Tested by: pho
Sponsored by: Netflix / Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13187
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Kegs for internal zones always keep the slab header in the slab itself.
Therefore, when determining the allocation size, we need to take the
slab header size into account.
Reported and tested by: ae, rakuco
Reviewed by: avg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12342
While these locks are guarnteed to not share their respective cache lines,
their current placement leaves unnecessary holes in lines which preceeded them.
For instance the annotation of vm_page_queue_free_mtx allows 2 neighbour
cachelines (previously separate by the lock) to be collapsed into 1.
The annotation is only effective on architectures which have it implemented in
their linker script (currently only amd64). Thus locks are not converted to
their not-padaligned variants as to not affect the rest.
MFC after: 1 week
internal zones only. This allows to create new zones at early stages
of boot, without need to mark them as internal to UMA, which isn't
always true.
Reviewed by: alc
It is simply a contigous virtual memory pointer and number of pages.
There is no need to build a linked list here. Just increment pointer
and decrement counter. The only functional difference to old allocator
is that before we gave pages from topmost and down to lowest, and now
we give them in normal ascending order.
While here remove padalign from a mutex that is unused at runtime.
Reviewed by: alc
Those places were not taking into account uk_ppera.
At present one allocation is always used by one slab, so uk_ppera must
be used to convert between pages and slabs.
uk_ipers is used to convert between slabs and items.
MFC after: 1 month (if ever)
A comment near kmem_reclaim() implies that we already did that.
Calling the hook is useful, because some handlers, e.g. ARC,
might be able to release significant amounts of KVA.
Now that we have more than one place where vm_lowmem hook is called,
use this change as an opportunity to introduce flags that describe
a reason for calling the hook. No handler makes use of the flags yet.
Reviewed by: markj, kib
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9764
It is only needed when removing a full bucket from the per-CPU cache. The
bucket cache (uz_buckets) is protected by the zone mutex and thus the
critical section can be released before inserting into that list.
MFC after: 1 week
mp_maxid or CPU_FOREACH() as appropriate. This fixes a number of places in
the kernel that assumed CPU IDs are dense in [0, mp_ncpus) and would try,
for example, to run tasks on CPUs that did not exist or to allocate too
few buffers on systems with sparse CPU IDs in which there are holes in the
range and mp_maxid > mp_ncpus. Such circumstances generally occur on
systems with SMT, but on which SMT is disabled. This patch restores system
operation at least on POWER8 systems configured in this way.
There are a number of other places in the kernel with potential problems
in these situations, but where sparse CPU IDs are not currently known
to occur, mostly in the ARM machine-dependent code. These will be fixed
in a follow-up commit after the stable/11 branch.
PR: kern/210106
Reviewed by: jhb
Approved by: re (glebius)
With r284861, UMA zones use the trash ctor and dtor by default. This is
incompatible with memguard, which frees the backing page when the item
is freed. Modify the UMA debug functions to be no-ops if the item was
allocated from memguard. This also fixes constructors such as
mb_ctor_pack(), which invokes the trash ctor in addition to performing
some initialization.
Reviewed by: glebius
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D6562
exhausted.
It is possible for a bug in the code (or, theoretically, even unusual
network conditions) to exhaust all possible mbufs or mbuf clusters.
When this occurs, things can grind to a halt fairly quickly. However,
we currently do not call mb_reclaim() unless the entire system is
experiencing a low-memory condition.
While it is best to try to prevent exhaustion of one of the mbuf zones,
it would also be useful to have a mechanism to attempt to recover from
these situations by freeing "expendable" mbufs.
This patch makes two changes:
a) The patch adds a generic API to the UMA zone allocator to set a
function that should be called when an allocation fails because the
zone limit has been reached. Because of the way this function can be
called, it really should do minimal work.
b) The patch uses this API to try to free mbufs when an allocation
fails from one of the mbuf zones because the zone limit has been
reached. The function schedules a callout to run mb_reclaim().
Differential Revision: https://reviews.freebsd.org/D3864
Reviewed by: gnn
Comments by: rrs, glebius
MFC after: 2 weeks
Sponsored by: Juniper Networks
A panicking thread always executes with a critical section held, so any
attempt to allocate or free memory while dumping will otherwise cause a
second panic. This can occur, for example, if xpt_polled_action() completes
non-dump I/O that was pending at the time of the panic. The fact that this
can occur is itself a bug, but asserting in this case does little but
reduce the reliability of kernel dumps.
Suggested by: kib
Reported by: pho
critical section.
uma_zalloc_arg()/uma_zalloc_free() may acquire a sleepable lock on the
zone. The malloc() family of functions may call uma_zalloc_arg() or
uma_zalloc_free().
The malloc(9) man page currently claims that free() will never sleep.
It also implies that the malloc() family of functions will not sleep
when called with M_NOWAIT. However, it is more correct to say that
these functions will not sleep indefinitely. Indeed, they may acquire
a sleepable lock. However, a developer may overlook this restriction
because the WITNESS check that catches attempts to call the malloc()
family of functions within a critical section is inconsistenly
applied.
This change clarifies the language of the malloc(9) man page to clarify
the restriction against calling the malloc() family of functions
while in a critical section or holding a spin lock. It also adds
KASSERTs at appropriate points to make the enforcement of this
restriction more consistent.
PR: 204633
Differential Revision: https://reviews.freebsd.org/D4197
Reviewed by: markj
Approved by: gnn (mentor)
Sponsored by: Juniper Networks
by noobj_alloc() don't belong to a vm object, they can't be paged out.
Since they can't be paged out, they are never enqueued in a paging queue.
Nonetheless, passing PQ_INACTIVE to vm_page_unwire() creates the appearance
that these pages are being enqueued in the inactive queue. As of r288122,
we can avoid giving this false impression by passing PQ_NONE.
Submitted by: kmacy
Differential Revision: https://reviews.freebsd.org/D1674
Objects obtained from such zones are supposed to retain type stability,
which was violated by aforementioned trashing.
This is a follow-up to r284861.
Discussed with: kib
Provide and document the RANDOM_ENABLE_UMA option.
Change RANDOM_FAST to RANDOM_UMA to clarify the harvesting.
Remove RANDOM_DEBUG option, replace with SDT probes. These will be of
use to folks measuring the harvesting effect when deciding whether to
use RANDOM_ENABLE_UMA.
Requested by: scottl and others.
Approved by: so (/dev/random blanket)
Differential Revision: https://reviews.freebsd.org/D3197
Fixes "panic: vm_radix_reserve_kva: unable to reserve KVA" caused by sign
extention of "pages * UMA_SLAB_SIZE" value passed to kva_alloc() which
takes unsigned long argument.
In the erroneus case that triggered this bug, the number of pages
to allocate in uma_zone_reserve_kva() was 0x8ebe6, that gave the
total number of bytes to allocate equal to 0x8ebe6000 (int).
This was then sign extended in kva_alloc() to 0xffffffff8ebe6000
(unsigned long).
Reviewed by: alc, kib
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3346
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
fragmented conditions currently just wakes up the pagedaemon. The
kmem arena is significantly smaller then the total available physical
memory, which means that there are loads where kmem arena space could
be exhausted, while there is a lot of pages available still. The
woken up pagedaemon sees vm_pages_needed != 0, verifies the condition
vm_paging_needed() which is false, clears the pass and returns back to
sleep, not calling neither uma_reclaim() nor lowmem handler.
To handle low kmem arena conditions, create additional pagedaemon
thread which calls uma_reclaim() directly. The thread sleeps on the
dedicated channel and kmem_reclaim() wakes the thread in addition to
the pagedaemon.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
