Joerg Wunsch
ef70eb9783
Correct a few mode page definitions according to the SCSI-2 specs.
...
Not yet used, but might perhaps be used in od(4) some day.
1996-05-19 19:29:09 +00:00
Joerg Wunsch
a77032a5a4
This patch updates sys/scsi/od.c:
...
* Improve ficticious geometry translation.
* CD compatible ioctl's, CDIOCALLOW, CDIOCPREVENT and CDIOCEJECT.
* Additional sense code handling for some drives.
Reviewed by: joerg
Submitted by: akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1996-05-19 19:26:21 +00:00
Poul-Henning Kamp
aa8de40ae5
Another sweep over the pmap/vm macros, this time with more focus on
...
the usage. I'm not satisfied with the naming, but now at least there is
less bogus stuff around.
1996-05-03 21:01:54 +00:00
Poul-Henning Kamp
031ce85e23
Don't fiddle page tables by hand, use pmap_enter.
...
(copied from wd.c)
1996-05-02 22:20:52 +00:00
Poul-Henning Kamp
e911eafcba
removed:
...
CLBYTES PD_SHIFT PGSHIFT NBPG PGOFSET CLSIZELOG2 CLSIZE pdei()
ptei() kvtopte() ptetov() ispt() ptetoav() &c &c
new:
NPDEPG
Major macro cleanup.
1996-05-02 14:21:14 +00:00
Bruce Evans
87b620baa9
Don't depend on <sys/types.h> including <sys/cdefs.h>.
1996-04-19 17:39:57 +00:00
Bruce Evans
3157adc8af
Removed now-unused #includes of <machine/cpu.h>. They were for bootverbose
...
being declared in the wrong place.
1996-04-07 17:32:42 +00:00
Marc G. Fournier
aab063aa77
Change dev_link() to devfs_link()
1996-04-02 04:54:26 +00:00
Marc G. Fournier
37a16ebf5f
Changed use of devfs_add_devsw() to devfs_add_devswf()
...
Changed DEVFS structure devfs_token so that adding the devices is
a simple matter of a 4 line for loop versus 16 lines of code
Reviewed by: julian@freebsd.org
1996-04-01 02:12:53 +00:00
Justin T. Gibbs
ef6653eddb
Implement the XS_SELTIMEOUT error code. This causes the SCSI code to
...
not retry again and should be used when a device times out during selection
(ie is not on the bus). This should speed up the boot sequence.
1996-03-31 03:19:09 +00:00
Bruce Evans
f699ca4bee
Fixed devfs group and permissions of some more disk devices.
...
Added devfs cd control device.
1996-03-29 11:57:52 +00:00
Marc G. Fournier
ad6dc98242
Fixed missing variable 'name' for DEVFS code
1996-03-29 04:35:09 +00:00
Marc G. Fournier
23cbdfcbc7
Fixed a Typo
1996-03-28 16:51:12 +00:00
Marc G. Fournier
ccbc58d3ca
Using devfs_add_devswf() instead of devfs_add_devsw()
...
Reviewed by: julian@freebsd.org
1996-03-28 14:33:59 +00:00
Bruce Evans
9120a859f5
Fixed name of pt device (it has a unit number). devfs still only creates
...
one.
Added control device.
1996-03-27 20:07:29 +00:00
Bruce Evans
6ae323519c
Fixed group of disk devices (was wheel or games, now operator).
...
Added scsi control devices.
Converted almost everything that I changed to use devfs_add_devswf()
and verbose id macros.
st.c:
Renamed enrst* to erst* since that's what the current name is (enrst
seems to be an old name).
1996-03-27 18:50:10 +00:00
David Greenman
a6409dd7a8
Fixed some missing int32 -> int32_t
1996-03-10 18:17:54 +00:00
Jordan K. Hubbard
f8decb67c4
u_int8 -> u_int8_t
1996-03-10 12:52:47 +00:00
Justin T. Gibbs
9932c050b9
Cleanse the SCSI subsystem of its internally defined types
...
u_int32, u_int16, u_int8, int32, int16, int8.
Use the system defined *_t types instead.
1996-03-10 07:13:15 +00:00
Peter Wemm
c146b42dc0
Fix broken SCSI_DELAY option.. (missing #include "opt_scsi.h")
...
Pointed out by: Boyd Faulkner <faulkner@asgard.bga.com>
1996-03-09 07:13:57 +00:00
Peter Wemm
4bd4912865
Add more options into the conf/options and i386/conf/options.i386 files
...
and the #include hooks so that 'make depend' is more useful. This
covers most of the options I regularly use (but not all) and some other
easy ones.
1996-03-02 18:24:13 +00:00
John Dyson
33309c7fc0
More b_flags fixes.
1996-03-02 01:49:51 +00:00
Julian Elischer
53ee9bec58
cosmetic fixes plus bring the cdevsw and bdevsw entries
...
into line with the new form.
1996-02-19 09:36:23 +00:00
Julian Elischer
e69f051247
allow the default tape unit to try figure out what it is rather than
...
forcing it to 512 byte blocks....
1996-02-19 09:26:07 +00:00
Stefan Eßer
9df7e08732
Add: CDU-8003A aka Apple CDROM-300
...
Submitted by: Michael Reifenberger <root@totum.plaut.de>
1996-02-17 23:59:24 +00:00
Andrey A. Chernov
fa2e3e4891
Physically ask for leadout entry instead of asking of
...
last_track + 1 entry, some drives don't understand it
1996-02-13 03:46:48 +00:00
Andrey A. Chernov
a034e85849
Recognize NRC MBR-7.4 too
1996-02-12 23:22:33 +00:00
Paul Traina
19c8e2e153
Close kern/614 - wait up to an hour for a tape operation like "fsf" (slow drives)
1996-02-08 06:23:49 +00:00
Joerg Wunsch
c38a76a7d0
Add a quirk record for the Tandberg 42XX series. Not only that these
...
drives require ST_Q_SNS_HLP, they also wrongly accept a blocksize of
1024 in the first place (for a QIC-150 cartridge), but complain later
about it. The hack is to only probe for 512 for them.
Reorder the entries in st_decide_mode() so that QIC >= 525 is properly
accepted as variable blocksize.
1996-02-03 13:31:13 +00:00
Andrey A. Chernov
628257e0b0
Simplify READTOCENTRYS by removing fake leadout code,
...
SCSI system do it for us
1996-02-02 23:43:40 +00:00
Joerg Wunsch
1d98b891d0
Add the HP4020i CD-R as a known device.
...
Reorder the CD-R entries in knowndevs[].
Submitted by: fred@jjarray.umd.edu (Fred Cawthorne)
1996-02-02 22:59:48 +00:00
Joerg Wunsch
b73b631531
Add the Emulex MD21 ESDI-to-SCSI bridge as a known device (with more than
...
one LUN).
Submitted by: Wilko Bulte
1996-02-02 22:57:27 +00:00
Andrey A. Chernov
b03135a62b
I forget the fact that cd_read_toc reads toc header in any case
1996-02-02 20:43:11 +00:00
Andrey A. Chernov
3681ddfb6e
Remove statement that does nothing now, forget in my prev. commit
1996-02-01 17:35:15 +00:00
Andrey A. Chernov
f1956303bb
Oops, pick wrong volume size for leadout entry
1996-02-01 16:22:58 +00:00
Jordan K. Hubbard
10fd4c5933
Add an entry for my HP Model 4020i CDR drive.
1996-01-31 07:32:11 +00:00
Andrey A. Chernov
5d33645207
Don't convert LBA to host order, they must stay in network order
...
as old code does.
1996-01-30 23:11:06 +00:00
Andrey A. Chernov
ba6d026ac8
OOPS, forget to adjust starting track to not physically read
...
leadout entry
1996-01-30 16:38:30 +00:00
Andrey A. Chernov
62bdf2b7c6
Use ntohs/ntohl when reading TOC instead of hardcoded byte swapping.
...
Put fake entry len for MSF format too.
1996-01-30 16:12:18 +00:00
Andrey A. Chernov
b7d2756067
READTOCENTRYS: make fake leadout entry
1996-01-30 14:30:43 +00:00
Andrey A. Chernov
e9a22c0c14
READTOCENTRYS: handle 0 and lead out requests, add argument checking
1996-01-30 12:59:00 +00:00
Joerg Wunsch
5044d1ff0b
Remove redundant declaration for worminit(). Dunno why my config(8)
...
didn't generate it, but it's supposed to.
1996-01-29 19:46:26 +00:00
Justin T. Gibbs
299bb9dbd6
Prevent media eject on first open and re-enable ejection on last close.
...
The previous behavior was based on the lifetime of a "mount session"
which isn't very obvious.
1996-01-29 03:19:23 +00:00
Joerg Wunsch
adb2fd2d93
Make worm.c compile with -Wall -Werror again.
...
. remove some unused variables
. declare worminit() right this time, it's actually extern (?)
. use wormminphys(), now that it's already there (hope i've got this right)
1996-01-28 23:33:23 +00:00
Julian Elischer
1c07bf3556
Submitted by: rich (which one?)
...
Another special case for probing multi-CD cdrom drives.
2nd try at this patch.
1996-01-28 22:41:44 +00:00
Jordan K. Hubbard
93f4df92ad
Back out the previous change. It's not correct for -current.
1996-01-28 21:51:57 +00:00
Jordan K. Hubbard
b73daed8ca
Add an entry for the "MBR-7", whatever that is.
...
Submitted by: rich
1996-01-28 20:43:49 +00:00
Joerg Wunsch
6e333abfc2
Minor but fatal spelling error when merging my code into -current.
...
Also declared worminit() to avoid a compiler warning. Seems that the
other SCSI drivers don't declare XXinit() yet, so perhaps we'd also
create a typedef for these func's.
1996-01-28 09:56:04 +00:00
Joerg Wunsch
984afdcfd2
The Great Merge.
...
The worm driver is alpha-usable! I've stuffed everything that is
needed into the kernel driver, including the logic to select
between different vendor's quirks.
Disclaimer: this has by now _only_ been tested on a heavily tweaked
2.0.5R system. I've done my best to retrofit it into -current, but
i don't have a chance yet to test it in a -current environment.
1996-01-27 17:48:12 +00:00
Bruce Evans
c8f2fe8db8
First attempt at creating devfs entries for sliced devices. Doesn't
...
quite work yet, so the heart of it is disabled.
Added bdev and cdev args to dsopen().
drivers:
Fixed device names, links, minor numbers and modes.
wd.c:
Started actually supporting devfs.
diskslice.h:
Added devfs tokens to structs (currently 576 of them per disk! :-().
subr_diskslice.c:
Create devfs entries in dsopen() and (unsuccessfully) attempt to make
them go away at the right times. DEVFS is #undefed at the start so
that this shouldn't cause problems.
1996-01-27 04:18:15 +00:00