illumos/illumos-gate@63364b0ee263364b0ee2https://www.illumos.org/issues/6922
ZFS does not do a config_sync after removing an aux (spare, log, or cache)
device. AFAICT this isn't being done because it is slow and was deemed
unnecessary. However, it should be such a rare operation that speed doesn't
matter, and not doing it results in two problems:
1) It is theoretically possible to remove an aux device from one pool and
attach it to another, then lose power. When power is restored, both pools would
think that they own the aux device.
2) Removal of the aux device doesn't send any useful sysevents to userland.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@1825bc56e51825bc56e5https://www.illumos.org/issues/6878
Summary of changes:
* Replace generic "scan done" message with "scan aborted, restarting",
"scan cancelled", or "scan done"
* Log number of errors using spa_get_errlog_size
* Refactor scan restarting check into static function
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Nav Ravindranath <nav@delphix.com>
illumos/illumos-gate@8df0bcf0df8df0bcf0dfhttps://www.illumos.org/issues/6513
If a ZFS object contains a hole at level one, and then a data block is created
at level 0 underneath that l1 block, l0 holes will be created. However, these
l0 holes do not have the birth time property set; as a result, incremental
sends will not send those holes.
Fix is to modify the dbuf_read code to fill in birth time data.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@0d8fa8f8eb0d8fa8f8ebhttps://www.illumos.org/issues/6902
pjd has authored and commited a patch in Jan 21, 2012 that substanially speeds
up zfs snapshot listing if requesting only the name property and sorting by
name.
In this special case, the snapshot properties do not need to be loaded. This
code has been adopted by zfsonlinux on May 29, 2012.
Commit message from pjd:
Dramatically optimize listing snapshots when user requests only
snapshot
names and wants to sort them by name, ie. when executes:
1. zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot
properties.
Below you can find how long does it take to list 34509 snapshots from
a single
disk pool before and after this change with cold and warm cache:
before:
1. time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
1. time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
References:
http://svnweb.freebsd.org/base?view=revision&revision=230438https://github.com/freebsd/freebsd/commit/8e3e9863https://github.com/zfsonlinux/zfs/commit/0cee2406
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pawel Dawidek <pjd@freebsd.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Martin Matuska <martin@matuska.org>
illumos/illumos-gate@c971037baac971037baahttps://www.illumos.org/issues/6876
Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking for
trouble. We should check every dataset on import, using a 1024 byte buffer and
checking each time to see if the dataset's new name is longer than 256 bytes.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@11ceac77ea11ceac77eahttps://www.illumos.org/issues/6844
dnode_next_offset is used in a variety of places to iterate over the holes or
allocated blocks in a dnode. It operates under the premise that it can iterate
over the blockpointers of a dnode in open context while holding only the
dn_struct_rwlock as reader. Unfortunately, this premise does not hold.
When we create the zio for a dbuf, we pass in the actual block pointer in the
indirect block above that dbuf. When we later zero the bp in
zio_write_compress, we are directly modifying the bp. The state of the bp is
now inconsistent from the perspective of dnode_next_offset: the bp will appear
to be a hole until zio_dva_allocate finally finishes filling it in. In the
meantime, dnode_next_offset can detect a hole in the dnode when none exists.
I was able to experimentally demonstrate this behavior with the following
setup:
1. Create a file with 1 million dbufs.
2. Create a thread that randomly dirties L2 blocks by writing to the first L0
block under them.
3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle
of a file.
4. Do dnode_next_offset in a loop until we skip over such a non-existent hole.
The fix is to ensure that it is valid to iterate over the indirect blocks in a
dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP
and updating the actual BP in dbuf_write_ready while holding the lock.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alex Reece <alex@delphix.com>
illumos/illumos-gate@1fdcbd00c91fdcbd00c9https://www.illumos.org/issues/6874
When we do a clone swap (caused by "zfs rollback" or "zfs receive"), the ZPL
doesn't completely reload the state from the DMU; some values remain cached in
the zfsvfs_t.
steps to reproduce:
```
#!/bin/bash -x
zfs destroy -R test/fs
zfs destroy -R test/recvd
zfs create test/fs
zfs snapshot test/fs@a
zfs set userquota@$USER=1m test/fs
zfs snapshot test/fs@b
zfs send test/fs@a | zfs recv test/recvd
zfs send -i @a test/fs@b | zfs recv test/recvd
zfs userspace test/recvd
1. should show 1m quota
dd if=/dev/urandom of=/test/recvd/file bs=1k count=1024
sync
dd if=/dev/urandom of=/test/recvd/file2 bs=1k count=1024
2. should fail with ENOSPC
sync
zfs unmount test/recvd
zfs mount test/recvd
zfs userspace test/recvd
3. if bug above, now shows 1m quota
dd if=/dev/urandom of=/test/recvd/file3 bs=1k count=1024
4. if bug above, now fails with ENOSPC
```
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Wilson <alex.wilson@joyent.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Patrick Mooney <pmooney@pfmooney.com>
illumos/illumos-gate@771e39c3b1
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@a2f72b65eb
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@0b8049bfb0
delete permissions for ACLs
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Author: Kevin Crowe <kevin.crowe@nexenta.com>
openzfs/openzfs@a40149b935
aclmode=passthrough
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Author: Albert Lee <trisk@nexenta.com>
openzfs/openzfs@1bcf0d240b
perms (groupmask)
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Author: Albert Lee <trisk@nexenta.com>
openzfs/openzfs@eebb483d0c
some additional considerations
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Author: Kevin Crowe <kevin.crowe@nexenta.com>
openzfs/openzfs@d316fffc9c
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Joe Stein <joe.stein@delphix.com>
openzfs/openzfs@215198a6ad
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Tim Chase <tim@chase2k.com>
openzfs/openzfs@445e67805d
illumos/illumos-gate@26455f9efc26455f9efchttps://www.illumos.org/issues/6052
At the moment type parameter of lzc_create() is of dmu_objset_type_t type.
That exposes an implementation detail and requires sys/fs/zfs.h to be included
in libzfs_core.h creating unnecessary coupling between libzfs_core interface
and ZFS internals.
I think that dmu_objset_type_t should be replaced with a libzfs_core
enumeration of supported dataset types.
For ABI reasons the new enumeration could be bit-compatible with
dmu_objset_type_t.
For example:
typedef enum {
LZC_DST_ZFS = 2,
LZC_DST_ZVOL
} lzc_dataset_type_t;
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Author: Alexander Motin <mav@FreeBSD.org>
Improve speculative prefetch of indirect blocks.
Scalability of many operations on wide ZFS pool can be limited by
requirement to prefetch indirect blocks first. Recently added
asynchronous indirect block read partially helped, but did not
solve the problem completely. This patch extends existing prefetcher
functionality to explicitly work with indirect blocks.
Before this change prefetcher issued reads for up to 8MB of data in
advance. With this change it also issues indirect block reads
for up to 64MB of data in advance, so that when it will be time to
actually read those data, it can be done immediately. Alike effect
can be achieved by just increasing maximal data prefetch distance,
but at higher memory cost.
Also this change introduces indirect block prefetch for rewrite
operations, that was never done before. Previously ARC miss for
Indirect blocks regularly blocked rewrites, converting perfectly
aligned asynchronous operations into synchronous read-write pairs,
significantly reducing maximal rewrite speed.
While being there this issue was also fixed:
- prefetch was done always, even if caching for the dataset was
completely disabled.
Testing on FreeBSD with zvol on top of 6x striped 2x mirrored pool
of 12 assorted HDDs shown me such performance numbers:
------- BEFORE --------
Write 491363677 bytes/sec
Read 312430631 bytes/sec
Rewrite 97680464 bytes/sec
-------- AFTER --------
Write 493524146 bytes/sec
Read 438598079 bytes/sec
Rewrite 277506044 bytes/sec
Closes#65Closes#80openzfs/openzfs@792fd28ac0
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Eli Rosenthal <eli.rosenthal@delphix.com>
illumos/illumos-gate@c20404ff77
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@41c6413cb5
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@d09e4475f6
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Stefan Ring <stefanrin@gmail.com>
Reviewed by: Steven Burgess <sburgess@datto.com>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
In certain circumstances, "zfs send -i" (incremental send) can produce a
stream which will result in incorrect sparse file contents on the
target.
The problem manifests as regions of the received file that should be
sparse (and read a zero-filled) actually contain data from a file that
was deleted (and which happened to share this file's object ID).
Note: this can happen only with filesystems (not zvols, because they do
not free (and thus can not reuse) object IDs).
Note: This can happen only if, since the incremental source (FromSnap),
a file was deleted and then another file was created, and the new file
is sparse (i.e. has areas that were never written to and should be
implicitly zero-filled).
We suspect that this was introduced by 4370 (applies only if hole_birth
feature is enabled), and made worse by 5243 (applies if hole_birth
feature is disabled, and we never send any holes).
The bug is caused by the hole birth feature. When an object is deleted
and replaced, all the holes in the object have birth time zero. However,
zfs send cannot tell that the holes are new since the file was replaced,
so it doesn't send them in an incremental. As a result, you can end up
with invalid data when you receive incremental send streams. As a
short-term fix, we can always send holes with birth time 0 (unless it's
a zvol or a dataset where we can guarantee that no objects have been
reused).
Closes#37
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Joshua M. Clulow <jmc@joyent.com>
illumos/illumos-gate@b211eb9181
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Gerhard Roethlin <git@the-color-black.net>
illumos/illumos-gate@cb605c4d8a
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Igor Kozhukhov <ikozhukhov@gmail.com>
illumos/illumos-gate@c16bcc4577
6673 want a macro to convert seconds to nanoseconds and vice-versa
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Eli Rosenthal <eli.rosenthal@delphix.com>
illumos/illumos-gate@a8f6344fa0
in the dedup property value
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: ilovezfs <ilovezfs@icloud.com>
illumos/illumos-gate@971640e6aa
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5f7a8e6d75
after the scrub started
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@38d6103674
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Gary Mills <gary_mills@fastmail.fm>
illumos/illumos-gate@8c04a1fa3f
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@97e8130957
Author: Bryan Cantrill <bryan@joyent.com>
Reviewed by: Alex Wilson <alex.wilson@joyent.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
illumos/illumos-gate@1c0cef67db
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Andriy Gapon <avg@icyb.net.ua>
illumos/illumos-gate@e7e978b1f7
During the update process in sa_modify_attrs(), the sizes of existing
variably-sized SA entries are obtained from sa_lengths[]. The case where
a variably-sized SA was being replaced neglected to increment the index
into sa_lengths[], so subsequent variable-length SAs would be rewritten
with the wrong length. This patch adds the missing increment operation
so all variably-sized SA entries are stored with their correct lengths.
Another problem was that index into attr_desc[] was increased even when
an attribute was removed. If that attribute was not the last attribute,
then the last attribute was lost.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Steven Hartland <steven.hartland@multiplay.co.uk>
illumos/illumos-gate@2bad22584d
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Steven Hartland <steven.hartland@multiplay.co.uk>
illumos/illumos-gate@f693d300fb
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5878fad70d
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: James Pan <jiaming.pan@yahoo.com>
illumos/illumos-gate@3502ed6e7c
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Will Andrews <will@firepipe.net>
illumos/illumos-gate@eb5bb58421
