There are a number of msdosfs improvements in NetBSD that may be worth
bringing over, and this reduces noise in the comparison.
Differential Revision: https://reviews.freebsd.org/D1466
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
handle it in arc_output() instead of nd6_storelladdr().
* Remove IFT_ARCNET check from arpresolve() since arc_output() does not
use arpresolve() to handle broadcast/multicast. This check was there
since r84931. It looks like it was not used since r89099 (initial
import of Arcnet support where multicast is handled separately).
* Remove IFT_IEEE1394 case from nd6_storelladdr() since firewire_output()
calles nd6_storelladdr() for unicast addresses only.
* Remove IFT_ARCNET case from nd6_storelladdr() since arc_output() now
handles multicast by itself.
As a result, we have the following pattern: all non-ethernet-style
media have their own multicast map handling inside their appropriate
routines. On the other hand, arpresolve() (and nd6_storelladdr()) which
meant to be 'generic' ones de-facto handles ethernet-only multicast maps.
MFC after: 3 weeks
decade: m_pulldown() is willing to consider ordinary mbufs writable.
Retain another, related, and also outdated comment, but with a caveat
that it is partially stale. Do not, for now, address the problem that
it raises (that only EXT_CLUSTER external storage is considered
writable, regardless of the results of M_WRITABLE() on the mbuf).
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differences with NetBSD
Reapply our local patches on top of it
Fix Unicode environement detection
Fix reading a line in unicode environment.
It allows /bin/sh to works in UTF-8 envs
Differential Revision: https://reviews.freebsd.org/D1455
Reviewed by: jilles, pfg
Obtained from: NetBSD [1]
MFC after: 1 month
Relnotes: yes
after dmar driver was converted to use rids. The bus component to
calculate context page must be taken from the requestor rid, which is
a bridge, and not from the device bus number.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
sanitizer libraries that already work on FreeBSD:
* asan: Address Sanitizer
* ubsan: Undefined Behavior Sanitizer
* profile: Profile Guided Optimization support
Please note that these libraries are *experimental* at this stage, so
the main Makefile is not yet connected to the build.
Since I didn't want to needlessly edit BSD.usr.dist, you will also have
to create the install directory /usr/lib/clang/3.5.0/lib/freebsd
manually for now.
EOPNOTSUPP. The current behavior can mask real quiesce errors since
devclass_quiesce_driver() stops iterating over drivers as soon as it
gets an error (incluiding EOPNOTSUPP), but the caller it returns the
error to explicitly ignores EOPNOTSUPP.
Reviewed by: imp
hold mbuf chain instead of calling full-blown nd6_output_lle()
for each packet. This simplifies both callers and nd6_output_lle()
implementation.
* Make nd6_output_lle() static and remove now-unused lle and chain
arguments.
* Rename nd6_output_flush() -> nd6_flush_holdchain() to be consistent.
* Move all pre-send transmit hooks to newly-created nd6_output_ifp().
Now nd6_output(), nd6_output_lle() and nd6_flush_holdchain() are using
it to send mbufs to if_output.
* Remove SeND hook from nd6_na_input() because it was implemented
incorrectly since the beginning (r211501):
- it tagged initial input mbuf (m) instead of m_hold
- tagging _all_ mbufs in holdchain seems to be wrong anyway.
and not automatically come back if they were gone for a short
period of time.
The isp(4) driver has a 30 second gone device timer that gets
activated whenever a device goes away. If the device comes back
before the timer expires, we don't send a notification to CAM that
it has gone away. If, however, there is a command sent to the
device while it is gone and before it comes back, the isp(4) driver
sends the command back with CAM_SEL_TIMEOUT status.
CAM responds to the CAM_SEL_TIMEOUT status by removing the device.
In the case where a device comes back within the 30 second gone
device timer window, though, we weren't telling CAM the device
came back.
So, fix this by tracking whether we have told CAM the device is
gone, and if we have, send a rescan if it comes back within the 30
second window.
ispvar.h:
In the fcportdb_t structure, add a new bitfield,
reported_gone. This gets set whenever we return a command
with CAM_SEL_TIMEOUT status on a Fibre Channel device.
isp_freebsd.c:
In isp_done(), if we're sending CAM_SEL_TIMEOUT for for a
command sent to a FC device, set the reported_gone bit.
In isp_async(), in the ISPASYNC_DEV_STAYED case, rescan the
device in question if it is mapped to a target ID and has
been reported gone.
In isp_make_here(), take a port database entry argument,
and clear the reported_gone bit when we send a rescan to
CAM.
In isp_make_gone(), take a port database entry as an
argument, and set the reported_gone bit when we send an
async event telling CAM consumers that the device is gone.
Sponsored by: Spectra Logic
MFC after: 1 week
The Command Reference Number is used for precise delivery of
commands, and is part of the FC-Tape functionality set. (This is
only enabled for devices that support precise delivery of commands.)
It is an 8-bit unsigned number that increments from 1 to 255. The
commands sent by the initiator must be processed by the target in
CRN order if the CRN is non-zero.
There are certain scenarios where the Command Reference Number
sequence needs to be reset. When the target is power cycled, for
instance, the initiator needs to reset the CRN to 1. The initiator
will know this because it will see a LIP (when directly connected)
or get a logout/login event (when connected to a switch).
The isp(4) driver was not resetting the CRN when a target
went away and came back. When it saw the target again after a
power cycle, it would continue the CRN sequence where it left off.
The target would ignore the command because the CRN sequence is
supposed to be reset to 1 after a power cycle or other similar
event.
The symptom that the user would see is that there would be lots of
aborted INQUIRY commands after a tape library was power cycled, and
the library would fail to probe. The INQUIRY commands were being
ignored by the tape drive due to the CRN issue mentioned above.
isp_freebsd.c:
Add a new function, isp_fcp_reset_crn(). This will reset
all of the CRNs for a given port, or the CRNs for all LUNs
on a target.
Reset the CRNs for all targets on a port when we get a LIP,
loop reset, or loop down event.
Reset the CRN for a particular target when it arrives, is changed
or departs. This is less precise behavior than the
clearing behavior specified in the FCP-4 spec (which says
that it should be reset for PRLI, PRLO, PLOGI and LOGO),
but this is the level of information we have here. If this
is insufficient, then we will need to add more precise
notification from the lower level isp(4) code.
isp_freebsd.h:
Add a prototype for isp_fcp_reset_crn().
Sponsored by: Spectra Logic
MFC after: 1 week
This includes a new summary mode (-s) for camcontrol defects that
quickly tells the user the most important thing: how many defects
are in the requested list. The actual location of the defects is
less important.
Modern drives frequently have more than the 8191 defects that can
be reported by the READ DEFECT DATA (10) command. If they don't
have that many grown defects, they certainly have more than 8191
defects in the primary (i.e. factory) defect list.
The READ DEFECT DATA (12) command allows for longer parameter
lists, as well as indexing into the list of defects, and so allows
reporting many more defects.
This has been tested with HGST drives and Seagate drives, but
does not fully work with Seagate drives. Once I have a Seagate
spec I may be able to determine whether it is possible to make it
work with Seagate drives.
scsi_da.h: Add a definition for the new long block defect
format.
Add bit and mask definitions for the new extended
physical sector and bytes from index defect
formats.
Add a prototype for the new scsi_read_defects() CDB
building function.
scsi_da.c: Add a new scsi_read_defects() CDB building function.
camcontrol(8) was previously composing CDBs manually.
This is long overdue.
camcontrol.c: Revamp the camcontrol defects subcommand. We now
go through multiple stages in trying to get defect
data off the drive while avoiding various drive
firmware quirks.
We start off by requesting the defect header with
the 10 byte command. If we're in summary mode (-s)
and the drive reports fewer defects than can be
represented in the 10 byte header, we're done.
Otherwise, we know that we need to issue the
12 byte command if the drive reports the maximum
number of defects.
If we're in summary mode, we're done if we get a
good response back when asking for the 12 byte header.
If the user has asked for the full list, then we
use the address descriptor index field in the 12
byte CDB to step through the list in 64K chunks.
64K is small enough to work with most any ancient
or modern SCSI controller.
Add support for printing the new long block defect
format, as well as the extended physical sector and
bytes from index formats. I don't have any drives
that support the new formats.
Add a hexadecimal output format that can be turned
on with -X.
Add a quiet mode (-q) that can be turned on with
the summary mode (-s) to just print out a number.
Revamp the error detection and recovery code for
the defects command to work with HGST drives.
Call the new scsi_read_defects() CDB building
function instead of rolling the CDB ourselves.
Pay attention to the residual from the defect list
request when printing it out, so we don't run off
the end of the list.
Use the new scsi_nv library routines to convert
from strings to numbers and back.
camcontrol.8: Document the new defect formats (longblock, extbfi,
extphys) and command line options (-q, -s, -S and
-X) for the defects subcommand.
Explain a little more about what drives generally
do and don't support.
Sponsored by: Spectra Logic
MFC after: 1 week
showing up on Haswell-class CPUs
From the Intel SDM, "Table 3-20. Feature Information Returned in the
ECX Register"
11 | SDBG | A value of 1 indicates the processor supports
IA32_DEBUG_INTERFACE MSR for silicon debug.
Submitted by: jiashiun@gmail.com
Reviewed by: jhb neel
MFC after: 2 weeks
data to go undetected.
The probe code does an MD5 checksum of the inquiry data (and page
0x80 serial number if available) before doing a reprobe of an
existing device, and then compares a checksum after the probe to
see whether the device has changed.
This check was broken in January, 2000 by change 56146 when the extended
inquiry probe code was added.
In the extended inquiry probe case, it was calculating the checksum
a second time. The second time it included the updated inquiry
data from the short inquiry probe (first 36 bytes). So it wouldn't
catch cases where the vendor, product, revision, etc. changed.
This change will have the effect that when a device's inquiry data is
updated and a rescan is issued, it will disappear and then reappear.
This is the appropriate action, because if the inquiry data or serial
number changes, it is either a different device or the device
configuration may have changed significantly. (e.g. with updated
firmware.)
scsi_xpt.c: Don't calculate the initial MD5 checksum on
standard inquiry data and the page 0x80 serial
number if we have already calculated it.
MFC after: 1 week
Sponsored by: Spectra Logic
kernel via the global cpuset_domain[] array. To export these to userland,
add a CPU_WHICH_DOMAIN level that can be used to fetch the mask for a
specific domain. Add a -d flag to cpuset(1) that can be used to fetch
the mask for a given domain.
Differential Revision: https://reviews.freebsd.org/D1232
Submitted by: jeff (kernel bits)
Reviewed by: adrian, jeff
packages intended to be included on the DVD, and
remove any nonexistent ports from the final list.
Print the list of missing paths, and ensure that
DVD_PACKAGES is non-zero length (which should never
happen).
MFC after: 3 days
X-MFC-With: r276820, r276822
Sponsored by: The FreeBSD Foundation
- Fix depend target by removing a space after an "-I" inclusion option.
- Fix some minor compile issues in the "osmtest" utility.
MFC after: 3 days
PR: 196580
Sponsored by: Mellanox Technologies
