function were put in i386/i386/machdep.c from where it has been
cut and pasted to other architectures with only minor corruption.
Disklabel is really a MI format in many ways, at least it certainly
is when you operate on struct disklabel.
Put bounds_check_with_label() back in subr_disklabel.c where it belongs.
Sponsored by: DARPA & NAI Labs.
MD function is just a wrapper around db_stack_trace_cmd() that prints out
a backtrace of curthread. Currently, this function is only implemented
on i386 and alpha (and the alpha version isn't quite tested yet, will do
that in a bit). Other changes:
- For i386, fix a bug in the raw frame address case. The eip we extract
from the passed in frame address does not match the frame we received.
Thus, instead of printing a bogus frame with the wrong eip, go ahead
and advance frame down to the same frame as the eip we are using.
- For alpha, attempt to add a way of doing a raw trace for alpha. Instead
of passing a frame address in 'addr', pass in a pointer to a structure
containing PC and KSP and use those to start the backtrace. The alpha
db_print_backtrace() uses asm to read in the current PC and KSP values
into such a request.
Tested on: i386
Requested by: many
This patch addresses a bug that can cause a GPF in the kernel - if a
process makes use of i386_set_ldt to install a LDT entry, then loads
a corresponding segment descriptor into %gs, forks, and if the child
execs.
In this scenario, setregs executes user_ldt_free and then determines
how to reset the %gs register:
/* reset %gs as well */
if (pcb == curpcb)
load_gs(_udatasel);
else
pcb->pcb_gs = _udatasel;
This is insufficient in the fork/exec case, since pcb will be equal
to curpcb when the child execs; load_gs will reset %gs to _udatasel
but it doesn't reset pcb->pcb_gs; upon return from the system call,
cpu_switch_load_gs will thus attempt to restore %gs from pcb->pcb_gs
and trigger a GPF since all LDT entries have already been cleared.
The fix is to always reset pcb->pcb_gs to _udatasel.
Submitted by: Christian Zander <zander@minion.de>
Reviewed by: jake
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
- Maintain fpu state across signals.
- Use ucontext_t's to store KSE thread state.
- Synthesize state for the UTS upon each upcall, rather than
saving and copying a trapframe.
- Save and restore FPU state properly in ucontext_t's.
Reviewed by: deischen, julian
Approved by: -arch
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
to control the mapping of things like the ACPI and APM into memory.
The problem is that starting X changes these values, so if something
was using the bits of BIOS mapped into memory (say ACPI or APM),
then next time they access this memory the machine would hang.
This patch refuse to change MTRR values it doesn't understand,
unless a new "force" option is given. This means X doesn't change
them by accident but someone can override that if they really want
to.
PR: 28418
Tested by: Christopher Masto <chris@netmonger.net>,
David Bushong <david@bushong.net>,
Santos <casd@myrealbox.com>
MFC after: 1 week
to userland in the signal handler that were not being iflled out before, but
should and can be.
This part of sendsig could be slightly refactored to use an MI interface, or
ideally, *sendsig*() would have an API change to accept a siginfo_t, which
would be filled out by an MI function in the level above sendsig, and said MI
function would make a small call into MD code to fill out the MD parts (some
of which may be bogus, such as the si_addr stuff in some places). This would
eventually make it possible for parts of the kernel sending signals to set up
a siginfo with meaningful information.
Reviewed by: mux
MFC after: 2 weeks
if compiling with I686_CPU as a target. CPU_DISABLE_SSE will prevent
this from happening and will guarantee the code is not compiled in.
I am still not happy with this, but gcc is now generating code that uses
these instructions if you set CPUTYPE to p3/p4 or athlon-4/mp/xp or higher.
route interrupts if the child bus is described in the PCIBIOS interrupt
routing table. For child busses that are in the routing table, they do
not necessarily use a 'swizzle' on their pins on the parent bus to route
interrupts for child devices. If the child bus is an embedded device then
the pins on the child devices can be (and usually are) directly connected
either to a PIC or to a Interrupt Router. This fixes PCIBIOS interrupt
routing across PCI-PCI bridges for embedded devices.
IRQ for an entry in a PCIBIOS interrupt routing ($PIR) table.
- Change pci_cfgintr() to except the current IRQ of a device as a fourth
argument and to use that IRQ for the device if it is valid.
- If an intpin entry in a $PIR entry has a link of 0, it means that that
intpin isn't connected to anything that can trigger an interrupt. Thus,
test the link against 0 to find invalid entries in the table instead of
implicitly relying on the irqs field to be zero. In the machines I have
looked at, intpin entries with a link of 0 often have the bits for all
possible interrupts for PCI devices set.
not the 'entry' member. The entry point is formed from both a base and
a relative entry point. 'entry' is that relative offset. It is perfectly
valid to have an entry point with a relative offset of 0. PCIbios.ventry
is the virtual address of the entry point that takes both 'base' and
'entry' into account, thus it is the proper variable to test to see if we
have an entry point or not.
lnc(4) will attach to AMD PCnet/FAST NICs if pcn(4) does not attach.
I.e. pcn(4) gets first chance. There is a problem however in that pcn(4)
was moved out of the install kernel so that the module would be used.
This however causes bad installs if one has an AMD PCnet/FAST NIC.
sysentvec. Initialized all fields of all sysentvecs, which will allow
them to be used instead of constants in more places. Provided stack
fixup routines for emulations that previously used the default.
Don't attempt to follow null pointers for zombie processes in db_ps().
Style fix: use explicit an comparison with NULL for all null pointer
checks in db_ps() instead of for half of them.
db_interface.c:
Fixed ddb's handling of traps from with ddb on i386's only.
This was mostly fixed in rev.1.27 (by longjmp()'ing back to the top
level) but was completly broken in rev.1.48 (by not unwinding the new
state (mainly db_active) either before or after the longjmp(). This
mostly never worked for other arches, since rev.1.27 has not been ported
and lower level longjmp()'s only handle traps for memory accesses. All
cases should be handled at a lower level to provided better control and
simplify unwinding of state.
Implementation details: don't pretend to maintain db_active in a nested
way -- ddb cannot be reentered in a nested way. Use db_active instead
of the db_global_jmpbuf_valid flag and longjmp()'s return value for things
related to reentering ddb. [re]entering is still not atomic enough.
in the original hardwired sysctl implementation.
The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int. Use
'long' there.
Change Maxmem and physmem and related variables to 'long', mostly for
completeness. Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody. This
comes for free on 32 bit machines, so why not?
alive!" message right as the scsi probe messages happen. This is a bit
nasty, but it seems to work. At the point that we unlock the AP's, briefly
wait till they are all done while we hold the console on their behalf.
