config file instead of hard-coding it in the driver. No functional
differences.
This is based on the code Richard Wiwatowski <rjwiwat@adelaide.on.net>
sent to the mailing list.
- Prepend PSM_ to some defines to avoid any possible name-space problems
- Use some already defined constants instead of magic #'s where appropriate.
[ No functional changes (yet) ]
the destination represents. For IP:
- Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local
(belongs to this host) and broadcast addresses, respectively.
- For all routes, RTF_MULTICAST is set if the destination is multicast.
The RTF_BROADCAST flag is used by ip_output() to eliminate a call to
in_broadcast() in a common case; this gives about 1% in our packet-generation
experiments. All three flags might be used (although they aren't now)
to determine whether a packet can be forwarded; a given host route can
represent a forwardable address if:
(rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST))
== RTF_HOST
Obviously, one still has to do all the work if a host route is not present,
but this code allows one to cache the results of such a lookup if rtalloc1()
is called without masking RTF_PRCLONING.
it empties all of the 256 byte incoming fifo, as it can spend more time
processing one port than intended, especially if data is streaming in
at 115.2K. The port fifo will be emptied and dumped into the tty system
and left until next time. I've been running this for quite some time on
one of my systems here.
Also, if the tty layer is blocked or full it lets the hardware assert the
flow control rather than loosing the data.
Compile for FreeBSD-2.2
Fix some compile warnings about function declarations
-current's VM include files have changed lately, this needed to be updated.
Use correct major number.
This is now two seperate drivers that support (I think) all of Stallions's
range, including the high performance intelligent cards, and their older
cards.
Submitted by: Greg Ungerer (gerg@stallion.oz.au)
(User-mode parts and patches to follow)
boards by Greg Ungerer (gerg@stallion.oz.au). (v0.0.1 alpha)
This is a multiple import of all revisions available to build up
a history.
This driver supports only some of the Stallion range, in particular, not
the highly intelligent cards. That comes in shortly.
Submitted by: Greg Ungerer (gerg@stallion.oz.au)
Macroize locore.s' page table setup even more, now it's almost readable.
Rename PG_U to PG_A (so that I can...)
Rename PG_u to PG_U. "PG_u" was just too ugly...
Remove some unused vars in pmap.c
Remove PG_KR and PG_KW
Remove SSIZE
Remove SINCR
Remove BTOPKERNBASE
This concludes my spring cleaning, modulus any bug fixes for messes I
have made on the way.
(Funny to be back here in pmap.c, that's where my first significant
contribution to 386BSD was... :-)
very busy servers (eg: news, web). This is an interaction between
embryonic processes that have not yet finished forking, and happen to
cause the kernel VM space to grow, hitting the uninitialised variable.
It was possible for this to strike at any time, depending on the size of
your kernel and load patterns. One machine had paniced occasionally
when cron launches a job since before the 2.1 release.
If you had "options DIAGNOSTIC", you may have seen references to bogus
addresses like 0xdeadc142 and the like.
This is a minimal change to fix the problem, it will probably be done
better by reordering p_vmspace to be in the startzero section, but it
becomes harder to validate then.
It's been vulnerable since pmap.c rev 1.40 (Jan 9, 1995), so it's been a
cause of problems since well before 2.0.5. This was when the merged
VM/buffer cache and the dynamic growing kernel VM space were first
committed. This probably fixes a few of PR's.
time. The results are currently ignored unless certain temporary options
are used.
Added sysctls to support reading and writing the clock frequency variables
(not the frequencies themselves). Writing is supposed to atomically
adjust all related variables.
machdep.c:
Fixed spelling of a function name in a comment so that I can log this
message which should have been with the previous commit.
Initialize `cpu_class' earlier so that it can be used in startrtclock()
instead of in calibrate_cyclecounter() (which no longer exists).
Removed range checking of `cpu'. It is always initialized to CPU_XXX
so it is less likely to be out of bounds than most variables.
clock.h:
Removed I586_CYCLECTR(). Use rdtsc() instead.
clock.c:
TIMER_FREQ is now a variable timer_freq that defaults to the old value of
TIMER_FREQ. #define'ing TIMER_FREQ should still work and may be the best
way of setting the frequency.
Calibration involves counting cycles while watching the RTC for one second.
This gives values correct to within (a few ppm) + (the innaccuracy of the
RTC) on my systems.
Fixed longstanding namespace convolution involving rune_t vs wchar_t...
This change breaks similar (but more convoluted) convolutions in the
stddef.h in gcc distributions. Ports of gcc should avoid using the
gcc headers.
page dir+table index.
pmap.h: remove NUPDE, it was wrong and not used. Sanitize KSTKPTEOFF.
vmparam.h: Calculate virtual addr from PDI+PTI from pmap.h rather than
using magic math. Remove UPDT, not used.
Ensure that queued commands are not touched by the abort code by setting
the SCB status to indicate what queue it is in.
Fix deadlocks when using SCB paging by using SCBs from the assigned_scbs
queue or an SCB that completed during the same interrupt if needed.
Don't ever use insl to pull SCBs from any of the controllers. You can
only do 8bit PIO reads. This only affected SCB paging.
With this checkin, SCB paging works quite a bit better, but I still have
some problems with it that may be caused by a firmware problem in my
PD1800s. It seems that using a tag number higher than the maximum number
of tags allowed by the device, confuses it. For example, if I queue
two commands, tagged 3 and 36, it never reconnects for tag 36.
mapped to semi-random place(s) depending on the content(s) of physical
address 0xA0000. This was fatal at least on my system with a some
memory-mapped devices. Console syscons somehow wasn't affected. It
bogusly hardcodes the address. Sigh.
should be <= than subordinate, not the other way around.
They are both true if the bridge is not cascaded (i.e., twin-channel
scsi/e-net adapters won't be affected by this bug), which is probably why
it was unnoticed until today.
implementations, and synchronizes us with the Nomad's latest code.
This code is based on the Nomad code, but heavily hacked by me.
Reviewed by: phk
Submitted by: the 'Nomads'
in place device drivers can now register power-down/power-up routines so
that we can use common routines to power-up/power-down cards for
insert/removals, suspend/resume, etc..
Reviewed by: phk
Submitted by: the 'Nomads'
strange results. This bug has been in here for a loooong time.
Many thanks to Pedro Salenbauch for finding this.
Submitted by: pedrosal@nce.ufrj.br (Pedro Salenbauch)
regarding apm to LINT
- Disabled the statistics clock on machines which have an APM BIOS and
have the options "APM_BROKEN_STATCLOCK" enabled (which is default
in GENERIC now)
- move around some of the code in clock.c dealing with the rtc to make
it more obvios the effects of disabling the statistics clock
Reviewed by: bde
8 not the 18 I was using during some of my own testing. Ooops.
For those that want to change the number for experimentation, you can
set the value on line 1553 of this file.
One of the manifiestations of the problem includes the -4 RSS problem
in ps.
Reviewed by: dyson
Submitted by: Stephen McKay <syssgm@devetir.qld.gov.au>
(Rev E or greater), aic7850, aic7860, aic7870, and aic7880 controllers.
SCB paging is enabled with the option "AHC_SCBPAGING_ENABLE". Full
comments on the algorithm are at the top of i386/scsi/aic7xxx.c.
options "AHC_TAGENABLE" and "AHC_QUEUE_FULL" have been removed. The
default is 4 tags without SCB paging, 8 with.
Clear the SCSIRSTI bit after throwing a bus reset. Some cards seem to get
confused otherwise.
Handle SCSIRSTI interrupts before checking to see if there is a valid
SCB in use since this can happen. (Clears PR# i386/1123)
Clean up the way we determine the number of SCBs on the card
(courtesy of Dan Eischen).
Guard against attempts to negotiate wide to a narrow controller.
Fix some comments.
Update my copyrights.
aic7770 >= Rev E, aic7850, aic7860, aic7870, and ai7880 based controllers.
Make findSCB safer for non-tagged commands when tagged commands are
active on the controller. The symptoms of this problem were
"Overlapped commands attempted" messages during error recovery
attempts.
Compact scratch ram usage. This leaves 8 bytes free for future use.
Clean up some comments.
aic7xxx_reg.h:
Update my copyright.
and B_READ before writing. This was was fatal. They also broke the
clearing of B_INVAL before doing i/o. This didn't actually matter.
Submitted by: mostly by joerg
compatibility slice. They were forgotten on last-close and then
creating them on first-open failed.
Devfs entries for slices other than the one containing the root file
system are still invisible unless you open a non-devfs inode on the
slice.
- More code cleanups
- #ifdef DEBUG debugging code
- More consistant printfs
- Better handling of the apm_int() assembly code (mostly from Bruce Evans)
Reviewed by: bde
1) Require all callers to pass a valid route pointer to ip_output()
so that we don't have to check and allocate one off the stack
as was done before. This eliminates one test and some stack
bloat from the common (UDP and TCP) case.
2) Perform the IP header checksum in-line if it's of the usual length.
This results in about a 5% speed-up in my packet-generation test.
3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
forked child to be dissociated from the parent).
Cleanup fork1(), implement vfork() and fork() in terms of rfork() flags.
Remove RFENVG, RFNOTEG, RFCNAMEG, RFCENVG which are Plan9 specific and cannot
possibly be implemented in FreeBSD.
Renumbered the flags to make up for the removal of the above flags.
Reviewed by: peter, smpatel
Submitted by: Mike Grupenhoff <kashmir@umiacs.umd.edu>
1) Set the persist timer to help time-out connections in the CLOSING state.
2) Honor the keep-alive timer in the CLOSING state.
This fixes problems with connections getting "stuck" due to incompletion
of the final connection shutdown which can be a BIG problem on busy WWW
servers.
- always use pci_conf_read() and pci_conf_write(). (This is required to
simulate non-existant devices in my system for PCI bridge code tests.)
- reorder some functions (put the main functions at the end).
- correct off by one bug in the code dealing with unitialized PCI to PCI
bridge chips. (Bug found by ASAMI Satoshi.)
- print function number for multi-function devices.
assignment to avoid one bug and several pessimizations.
In the old version, gcc-2.6.3 (i386 version) generates 16 bytes
of static data and copies it using 4 4-byte load-stores. gcc-2.7.2
generates 2 1-byte stores and calls memset() to zero 14 bytes.
Linking fails because memset() doesn't exist in the kernel.
In both versions, the 2 bytes stored directly are all that is
actually used unless the null padding at the end is used, since
the 3 4-byte words in the middle are initialized again by struct
assignment. These words are misaligned. gcc generates misaligned
load-stores for (small) misaligned struct copies.
Submitted by: Bruce Evans
an application #defines `noreturn'.
Changed one instance of `const' similarly. This is less like to be a
problem since applications shouldn't #define `const', and the common
hack of #defining `const' as nothing gives harmless (?) null attributes
instead of syntax errors.
Fixed comments on #endifs to match code.
common labels for LINT. There are still some common declarations for the
!KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in
tcp_debug.h.
common labels for LINT. There are still some common declarations for the
!KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in
tcp_debug.h.
