Arno Tuber reported via email that he needed to restart the gssd daemon
after booting, to get his Kerberized NFS mount to work.
Without this patch, rcorder shows that the gssd starts before NETWORKING
and kdc. The gssd will need NETWORKING to connect to the KDC and, if
the kdc is running on the same system, it does not make sense to start it
before the kdc. This fixed the problem for Arno.
While here, I also added a "# BEFORE: mountcritremote".
It does not affect ordering at this time, but I felt
it should be added, since the gssd needs to be running
when remote NFS mounts are done.
PR: 261939
Reported by: anothatuber@gmail.com
Tested by: anothatuber@gmail.com
Reviewed by: rew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34265
it seems that glibc supports them, and such spelling is mentioned in the
ld.bfd manual. Idea seems to auto-correct some quoting/makefile sytnax
errors on linker command line.
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34247
NanoBSD or, more generally, systems with root_rw_mount="NO" are not able
to remove the firstboot_sentinel file, typically /firstboot, because the
logic in /etc/rc is currently inverted.
When checkyesno root_rw_mount tests on a read-only file system, the
return is 1, hence avoiding the option to mount the system read-write.
Restore the ability to remove the firstboot_sentinel file on read-only
mounted file systems.
This change was introduced in 40adda8665, and partially fixed in
1ce07411fa.
Differential Revision: https://reviews.freebsd.org/D34166
PR#254282 reports a problem where nullfs mounts cannot be
exported via mountd for FreeBSD 13.0.
The problem seems to be that, to do the nullfs mounts in
/etc/fstab, they require the "late" mount option, so that the
underlying filesystem is mounted (ZFS for the PR).
Adding "mountlate" to the REQUIRE list in /etc/rc.d/mountd
fixes the problem, but that results in a dependency cycle
because /etc/rc.d/lockd specifies:
REQUIRE: nfsd
BEFORE: DAEMON
--> which forces mountd to preceed DAEMON.
This patch removes "nfsd" from REQUIRE for lockd and statd,
then adds mountlate to REQUIRE for mountd, to fix this
problem. Having lockd REQUIRE nfsd was done in the NetBSD
code when it was pulled into FreeBSD and there does not
seem to be a need for this.
In case this causes problems, a long MFC has been specified.
PR: 254282
Differential Revision: https://reviews.freebsd.org/D33256
MFC after: 3 months
This addresses the following boot message:
/etc/rc: WARNING: $zfskeys_enable is not set properly - see rc.conf(5).
Reported by: Mark Millard
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Fixes: bfb7a31b6a ("rc: Hook zfskeys to the build")
Fixes: 33ff39796f ("Add zfskeys rc.d script for auto-loading encryption keys")
When a use sets umask in login.conf(5) to 027 or 077 a subsequently
fetched /var/db/ntpd.leap-seconds.list will inherit the permissions
allowed by the umask, resulting in a file that may not be readable
ntpd running under the ntp account. This patch adds a umask command
to preempt the umask in login.conf(5) prior to fetching a new copy
of the leap-seconds file.
PR: 261298
Reported by: Martin Waschbusch <martin@waschbuesch.de>
MFC after: 3 days
And put the tcp-wrapper utilities in it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33439
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
Like wpa_supplicant, hostapd does not automatically UP the interface
when configured. The fix is similar to 5fcdc19a81.
Reported by: avg
Tested by: avg
MFC after: 1 week
In network6_getladdr() we are iterating over inet6 lines and are not
interested in any others. So tell ifconfig to limit output to "inet6"
as much as possible.
This is probably a micro-optimisation but was noticed while looking
at other IPv6-related boot-time improvements.
MFC after: 1 week
- Include <machine/tls.h> in MD rtld_machdep.h headers.
- Remove local definitions of TLS_* constants from rtld_machdep.h
headers and libc using the values from <machine/tls.h> instead.
- Use _tcb_set() instead of inlined versions in MD
allocate_initial_tls() routines in rtld. The one exception is amd64
whose _tcb_set() invokes the amd64_set_fsbase ifunc. rtld cannot
use ifuncs, so amd64 inlines the logic to optionally write to fsbase
directly.
- Use _tcb_set() instead of _set_tp() in libc.
- Use '&_tcb_get()->tcb_dtv' instead of _get_tp() in both rtld and libc.
This permits removing _get_tp.c from rtld.
- Use TLS_TCB_SIZE and TLS_TCB_ALIGN with allocate_tls() in MD
allocate_initial_tls() routines in rtld.
Reviewed by: kib, jrtc27 (earlier version)
Differential Revision: https://reviews.freebsd.org/D33353
This matches the TLS_TCB_ALIGN definition in libc.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33349
Previously TLS_DTV_OFFSET was added to the offset passed to
tls_get_addr_common; however, this approach matches powerpc and RISC-V
and better matches the intention.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33347
This is the more standard name for the bias of dtv pointers used on
other platforms. This also fixes a few other places that were using
the wrong bias previously on MIPS such as dlpi_tls_data in struct
dl_phdr_info and the recently added __libc_tls_get_addr().
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33346
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
This disables the random (between zero and one seconds) delay before
rtsol and rtsold send a a Router Solicitation packet. This delay is
specified as a SHOULD by RFC 4861 for avoidance of network congestion,
but network speeds have increased enough in the 25 years since this
first appeared (in RFC 1970) that it seems unnecessary as a default
at this point.
This speeds up the FreeBSD boot process by an average of 500 ms.
Reviewed by: kp
MFC after: 1 week
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D33089
Variables must be quoted if they contain non-alphanumeric characters.
Warner noted in the review that the lack of quoting causing problems
here is rather an edge case. I believe that it's worth adding the quotes
here anyway because this is what the specification says and there is no
good reason not to follow it.
Reviewed by: imp
Approved by: imp (src)
MFC after: 7 days
Add in all the variables set in the kenv variable devmatch_blocklist
too. This allows blocking autoloading from the boot loader.
Sponsored by: Netflix
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D32171
Since vfs.nfsd.srvmaxio can only be set when nfsd.ko
is loaded, but nfsd is not running, setting it in
/etc/sysctl.conf is not feasible when "options NFSD"
was not specified for the kernel.
This patch adds a new rc variable nfs_server_maxio,
which sets vfs.nfsd.srvmaxio at the correct time.
rc.conf.5 will be patched separately.
Reviewed by: 0mp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32997
Currently, if the linux service is run twice, mount(8) fails with:
mount: linprocfs: Device busy
mount: linsysfs: Device busy
mount: devfs: Device busy
mount: fdescfs: Device busy
mount: tmpfs: Device busy
It is a bit more user-friendly if before running mount(8) the service
checks if there are any file systems left to be mounted. This patch
implements this behavior.
Also, while here, create mount points directories (as suggested by
otis).
Reviewed by: trasz
Approved by: trasz (src)
Differential Revision: https://reviews.freebsd.org/D32463
Consistently use `return ()'.
Fix some spacing issues with types formatting, and around binary ops.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
File descriptor we operate on might reference something that is not a
file, e.g. shmfd. In this case, we cannot check MNT_NOEXEC in
principle.
If fstatfs(2) caused some failure on normal filesystem, then typical
expectation is that read or mmap of this file would also fail. If not,
mmap(2) PROT_EXEC on MNT_NOEXEC filesystem returns EACCES.
Reported by: obiwac@gmail.com
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Default value for ld_dynamic_weak is true, non-default settings should
be activated for the false value.
Reported by: obiwac@gmail.com
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
but still for tightly coupled things like ldd(1)
Rename paths.h to rtld_paths.h.
Add guard for rtld-specific externs declarations.
Add _COMPAT32_BASENAME_RTLD and _COMPAT32_PATH_RTLD.
Reviewed by: arichardson, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
Reset both pagepool_start and pagepool_end after a mmap(2) failure,
to avoid using invalid pagepool either for allocation or munmap(2).
PR: 259076
Noted by: Denis Koreshkov <dynamic-wind@mail.ru>
Reviewed by: arichardson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32514
